Scanstrut APT-F-150-01 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Scanstrut APT-F-150-01 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
ø50mm (2”)
External cable routing option.
19021
4x M8 Fasteners (Not Supplied)
Forward
14-02-20 Issue 3
Radome
DS30 Shell
101816
101819
4x 64000
4x 60402
*Use blank bung & weather seal*
4x 64000
M8 x 25mm+
Parts Required
x4
Hole Saw
ø50-52mm (2”)
Tools Required
Power drill
ø8.5mm (21/64”)
Drill Bit
No. 2 Posidriv
Screwdriver
Foam Seal
APT-150-01
APT-250-01
101816101819
101819
64000
Cable Grommet Blanking Plug M8 Nylon
Insulation
Parts List
x1
x1
x8
x1
x1
x1 x1
19021
x4
60617
M6x16mm
x4
M4x10 mm DS30 Shell DS30 Bung Set
60402
APT-F-150-01
APT-F-250-01
APT-150-01-BLK
APT-250-01-BLK
99040
Optional Weather Seal
Choose bung closest to cable ø
Waterproof Cable routing
1
1a
1b
Installation Instructions
Aluminium PowerTower
IMPORTANT
PowerTowers are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide – subject to change
without prior notice.
Use of the Power Towers with unapproved products, or overloading, invalidates any product warranty.
Scanstrut does not supply fastenings to x this product to the chosen surface. Please choose suitable fastenings for this purpose.
No liability is accepted for damage caused by incorrect installation.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
Product has been designed specically for the mounting of approved marine electronics under normal boating conditions.
IMPORTANT
Supports PowerTower sont uniquement compatibles avec les appareils d’électronique marine repris dans le dernier Guide Produits
Scanstrut – sujet à Modication sans préavis.
L’usage des Supports Power Tower avec des produits non validés, ou la surcharge de ces supports, annulent toute garantie.
Scanstrut ne fourni pas les xations pour sécuriser ce produit à la surface de choix. Veuillez utiliser des xations appropriées pour
cette opération.
Scanstrut déclinent toute responsabilité pour les dégats résultant d’une installation incorrecte.
L’installation et l’assemblage doivent être inspectés régulièrement an de déceler des dégats ou des pièces désserrées
Ce produit a été spéciquement conçu pour le montage d’appareils d’électronique marine approuvés dans des conditions de
navigation normales.
WICHTIG
PowerTower sind nur mit Elektronikgeräten für die Schifffahrt kompatibel, wie in der aktuellen Scanstrut Produktübersicht erwähnt.
Änderungen ohne vorherige Ankündigung vorbehalten.
Durch die Verwendung mit nicht genehmigten Produkten bzw. durch Überlastung wird jegliche Garantie ungültig.
Befestigungsteile für die Montage dieses Produkts auf der gewählten Oberäche. Bitte wählen Sie geeignete Befestigungsteile für
diesen Zweck.
Für Schäden aufgrund unsachgemäßen Einbaus wird keine Haftung übernommen.
Der Anbau und die Baueinheit müssen regelmäßig auf Anzeichen von Schäden oder lockere Teile geprüft werden.
Dieses Produkt wurde spezisch für die Befestigung genehmigter Elektronikgeräte für die Schifffahrt unter normalen Bootsfahrtsbedin-
gungen entwickelt.
IMPORTANTE
Gli PowerTowers sono compatibili solo con apparecchiature elettroniche navali come indicato nella più recente Guida ai Prodotti
Scanstrut – fatte salve eventuali modiche senza preavviso.
L’uso di PowerTowers con prodotti non approvati, o un loro sovraccarico, invalida qualsiasi garanzia.
Scanstrut non fornisce dispositivi per ssare questo prodotto alla supercie prescelta. Scegliere dispositivi di ssaggio adatti a questo
scopo.
Si declina qualsiasi responsabilità per danni causati da un’installazione erronea.
L’installazione e il montaggio devono essere ispezionati con regolarità per vericare la presenza di danni o di pezzi allentati.
Questo prodotto è stato studiato appositamente per il supporto di apparecchiature elettroniche navali approvate in normali condizioni
di navigazione.
IMPORTANTE
PowerTowers son compatibles únicamente con equipos electrónicos marinos según se establece en la última Guía de Productos
Scanstrut– sujeto a cambios sin previo aviso.
El uso de los PowerTowers con productos no aprobados, o bajo exceso de carga, invalidará cualquier garantía.
Scanstrut no suministra anclajes para jar el producto sobre la supercie elegida. Escoja el sistema de jación más adecuado para
este propósito.
No se aceptará ninguna responsabilidad por los daños causados por una instalación incorrecta.
La instalación y ensamblaje deberá inspeccionarse regularmente, comprobando cualquier evidencia de daños o piezas aojadas.
Este producto ha sido especícamente diseñado para el montaje de equipos electrónicos marinos aprobados bajo condiciones
normales de navegación.
E-mail: E-mail: sales@scanstrut.com usasales@scanstrut.com


Product specificaties

Merk: Scanstrut
Categorie: Niet gecategoriseerd
Model: APT-F-150-01

Heb je hulp nodig?

Als je hulp nodig hebt met Scanstrut APT-F-150-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Scanstrut

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd