Sauter TN EE Handleiding

Sauter Meetapparatuur TN EE

Lees hieronder de đź“– handleiding in het Nederlandse voor Sauter TN EE (16 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction Manual Multi-Mode
Ultrasonic Material Thickness Gauge
SAUTER - TN EE
Version 2.0
04/2020
GB
TN_EE- -e-2020 BA
PROFESSIONAL MEASURING
TN_EE- -e-2020 2 BA
GB
Congratulations on the purchase of a multi-mode material thickness gauge
from SAUTER. We hope you will enjoy your quality measuring instrument with its wide
range of functions. Please do not hesitate to contact us if you have any questions,
requests or suggestions.
Table of contents:
1. General information ....................................................................................... 3
1.1 Technical data ........................................................................................................................... 3
1.2 Main functions .......................................................................................................................... 3
1.3 Measuring principle .................................................................................................................. 4
1.4 Conguration ............................................................................................................................ 4
2. Control panel and display layout .................................................................. 5
2.1 Explanation of the key symbols .............................................................................................. 6
3. Preparation for commissioning .................................................................... 6
3.1 Selection of the sound generator ........................................................................................... 6
3.2 Conditions and preparations for surfaces ............................................................................. 8
4. Mode of operation .......................................................................................... 8
4.1 Switching on and o ................................................................................................................ 8
4.2 Selecting the measuring mode ............................................................................................... 9
4.3 Zero calibration ......................................................................................................................... 9
4.4 Calibration of the sound velocity .......................................................................................... 10
4.5 perform measurements .......................................................................................................... 12
4.6 Scan mode (ultrasound image mode) .................................................................................. 12
4.7 Change the resolution ............................................................................................................ 13
4.8 Changing the units ................................................................................................................. 13
4.9 Storage management ............................................................................................................. 13
4.10 EL Backlight ............................................................................................................................ 14
4.11 Battery information ................................................................................................................ 14
4.12 Automatic switch- off .............................................................................................................. 14
4.13 Establishing the basic setting of the system (reset) .......................................................... 14
4.14 Connection to the computer . ................................................................................................ 14
5. Maintenance ................................................................................................. 15
6. Transport and storage ................................................................................. 15
3 TN_EE- -e-2020 BA
1. General information
The Model TN-EE is a universal ultrasonic material thickness gauge. The device works
according to the same measuring principle as SONAR gauges and is used to measure
the thickness of various materials with a measuring accuracy of up to 0.1/0.01mm.
By simply switching from the operating mode 'pulse-echo' to 'echo-echo' (ignoring
resist lms or other lms) the ultrasonic measuring instrument TN 60-0.01EE can be
used universally.
1.1 Technical data
TN 30-0.01EE
TN 60-0.01EE
Dispaly
4.5 inch LCD display with backlight
Measuring range
(pulse-echo)
0.65~600mm (steel)
Measuring range
(Echo-Echo)
3~30mm
3~60mm
Sound velocity
1000~9999m/s
Resolution
0.1mm/0.01mm
Accuracy: ± 0,5 % thickness +0,01mm,
Memory
of up to 20 les (up to 99 measured values per le)
with stored measured values
Power supply
2x 1,5V AA batteries
Communication
USB 1.1
Ambient temperature
-20°C - 60°C
max. air humidity
≤ 90%
Dimensions
150x74x32mm
Weight
245g
1.2 Main functions
1. Universal application: Operation in 'pulse-echo' and 'echo-echo' mode
2. Possibility to measure the thickness of various materials, such as metal, plastic,
ceramics, composites, epoxy resins, glass and other materials with good ultrasonic
conductivity
3. Special applications possible with various transducers, including thickness
measurement of coarse-grained materials and at high temperature
4. Functions Sensor Zero, calibration of sound velocity
5. Function Two-point calibration
6. Single point mode and scan mode. The measurement results are requested seven
times per second in single point mode and sixteen times per second in scan mode.
7. The thickness gauge has a status display for coupling connection
8. Measuring unit: metric/inch.
9. Battery indicator to indicate the remaining battery life
10. Automatic standby and shutdown function to conserve battery power
11. Software for processing stored measurement data with the computer

Product specificaties

Merk: Sauter
Categorie: Meetapparatuur
Model: TN EE

Heb je hulp nodig?

Als je hulp nodig hebt met Sauter TN EE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Meetapparatuur Sauter

Sauter

Sauter FA 20 Handleiding

6 December 2024
Sauter

Sauter TN EE Handleiding

6 December 2024
Sauter

Sauter FH 2K Handleiding

6 December 2024
Sauter

Sauter FA 300 Handleiding

6 December 2024
Sauter

Sauter FH 50K Handleiding

6 December 2024
Sauter

Sauter FK 25 Handleiding

6 December 2024
Sauter

Sauter FH 50 Handleiding

6 December 2024
Sauter

Sauter FH 5K Handleiding

6 December 2024
Sauter

Sauter FH 100K Handleiding

6 December 2024
Sauter

Sauter HO 5K Handleiding

6 December 2024

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

TFA

TFA 40.1001 Handleiding

21 December 2024
Ansmann

Ansmann Comfort Check Handleiding

20 December 2024
PCE Instruments

PCE Instruments PCE-PST 1 X Handleiding

16 December 2024
Steinberg

Steinberg SBS-LF-147 Handleiding

15 December 2024
Steinberg

Steinberg SBS-SM-135C Handleiding

15 December 2024
Steinberg

Steinberg SBS-MT-100 Handleiding

15 December 2024
Steinberg

Steinberg SBS-SM-130C Handleiding

15 December 2024
Steinberg

Steinberg SBS-DT-999 Handleiding

15 December 2024
Steinberg

Steinberg SBS-DL-123D Handleiding

15 December 2024
Steinberg

Steinberg SBS-LF-141 Handleiding

15 December 2024