Sauter TI-D Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sauter TI-D (6 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction manual test stand for an
analog Shore hardness tester
SAUTER TI
Version 2.0
03/2020
GB
TI- -e-2020 BA
PROFESSIONAL MEASURING
2 - -e-2121 TI BA
GB
Congratulations on the purchase of the SAUTER TI test stand for our analogue Shore
hardness testers.
This table-top test stand is very robust and the device will last you many years if you
operate and maintain it properly.
If you have any questions, wishes or suggestions, we are always available to you under
our service number.
Table of contents:
1 Before commissioning .................................................................................. 3
2 Introduction .................................................................................................... 3
3 Structure ......................................................................................................... 3
4 Operation ........................................................................................................ 4
5 Note ................................................................................................................. 4
6 Maintenance ................................................................................................... 4
7 General safety instructions ........................................................................... 5
TI- -e-2121 3 BA
1 Before commissioning
Before putting the device into operation, check the delivery for any transport damage
to the packaging, the plastic case and the device itself. Should this be the case,
SAUTER must be contacted immediately.
2 Introduction
The test stand was developed especially for our Shore hardness testers. In
combination with these, the measuring results are up to 25% more stable and more
accurate. The TI-A0 is used for HB hardness testers Shore A and 0 and the TI-D for
HB hardness tester Shore D.
The TI-ACL and TI-DL are designed for digital HD units and come with a longer column
that can be interchanged with the shorter column of the standard models.
3 Structure


Product specificaties

Merk: Sauter
Categorie: Meetapparatuur
Model: TI-D

Heb je hulp nodig?

Als je hulp nodig hebt met Sauter TI-D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur Sauter

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Extech

Extech CO15 Handleiding

30 Januari 2025
Softing

Softing CT50 Handleiding

30 Januari 2025
Rigol

Rigol DS1054Z Handleiding

29 Januari 2025
Aim TTi

Aim TTi PLH120 Handleiding

29 Januari 2025
Kern

Kern ORM 2CA Handleiding

27 Januari 2025
Kern

Kern ORM 2CO Handleiding

27 Januari 2025
Kern

Kern ORA 1RE Handleiding

27 Januari 2025
Kern

Kern ORM 1SW Handleiding

27 Januari 2025
Kern

Kern ORA 7WB Handleiding

27 Januari 2025