Sauter TB 200-0.1US Handleiding

Sauter Meetapparatuur TB 200-0.1US

Lees hieronder de 📖 handleiding in het Nederlandse voor Sauter TB 200-0.1US (8 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction Manual Ultrasonic Material
Thickness Gauge
SAUTER -US, - -red TB TB US
Version 2.0
04/2020
GB
TB_US- -e-2020 BA
PROFESSIONAL MEASURING
2 TB_US- -e-2020 BA
GB
Congratulations on the purchase of an ultrasonic material thickness gauge from
SAUTER. We hope you will enjoy your quality measuring device with its wide range of
functions.
For questions, wishes or suggestions we are at your disposal.
Table of contents:
1. Functions ........................................................................................................ 3
2. Technical data ................................................................................................ 3
3. Description of the control panel ................................................................... 4
4. Material selection ........................................................................................... 4
5. Calibration (Adjustment) ............................................................................... 6
6. Measuring procedure .................................................................................... 6
7. Measuring with adjustment of the ultrasonic speed ................................... 7
8. Battery replacement ...................................................................................... 8
TB_US- -e-2020 3 BA
Attention: The model TB 200-0.1US-red has no freely selectable measuring range.
The stored materials can be measured. Therefore please read the relevant sections
only.
Note: It is strongly recommended to calibrate the new instrument before rst
use. This will result in a higher measurement accuracy from the beginning.
1. Functions
• Wide measuring range and high resolution
• Suitable for measuring the material thickness of many materials, e.g. steel, cast
iron, aluminium, copper, brass, zinc, quartz glass, polyethylene, PVC, grey cast
iron, nodular cast iron.
• Automatic shutdown function to maintain power.
2. Technical data
TB- US
TB- -red US
Display
4 digits, 10mm LCD display
Measuring range
1.5-200mm (45# steel)
Resolution
0.1mm 0.001 inch /
Measurement
uncertainty
±0,5% n +0,1
Sound velocity
500-9000m/s
Ambient temperature
0-50°C
Humidity
≤80%
Power supply
4x 1.5V AA (UM-3) batteries
Size
160x68x32mm
Weight
Approx. 210g (without batteries)
3. Scope of delivery:
• Transport case
• Operating instructions
• Ultrasonic sensor
• Ultrasonic contact gel
• 4x 1.5V AA batteries


Product specificaties

Merk: Sauter
Categorie: Meetapparatuur
Model: TB 200-0.1US

Heb je hulp nodig?

Als je hulp nodig hebt met Sauter TB 200-0.1US stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur Sauter

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Extech

Extech CO15 Handleiding

30 Januari 2025
Softing

Softing CT50 Handleiding

30 Januari 2025
Rigol

Rigol DS1054Z Handleiding

29 Januari 2025
Aim TTi

Aim TTi PLH120 Handleiding

29 Januari 2025
Kern

Kern ORM 2CA Handleiding

27 Januari 2025
Kern

Kern ORM 2CO Handleiding

27 Januari 2025
Kern

Kern ORA 1RE Handleiding

27 Januari 2025
Kern

Kern ORM 1SW Handleiding

27 Januari 2025
Kern

Kern ORA 7WB Handleiding

27 Januari 2025