Sauter FA 50 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sauter FA 50 (7 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
FA- -e-2020 BA
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49- [0]7433- 9933-0
Fax: +49- [0]7433-9933- 149
Internet: www.sauter.eu
Instruction manual mechanical
force gauge
SAUTER FA
Version 2.0
04/2020
GB
PROFESSIONAL MEASURING
2 - -e-2020 FA BA
GB
Congratulations on the purchase of a digital force measuring device with internal
measuring cell from SAUTER. We hope you will enjoy your quality measuring device
with a wide range of functions. Please do not hesitate to contact us if you have any
questions, requests or suggestions.
Table of contents:
1 Introduction .................................................................................................... 3
2 Scope of delivery ........................................................................................... 4
3 Working conditions ....................................................................................... 5
4 Technical data ................................................................................................ 5
5 Exhibitions 5 .....................................................................................................
6 Adaptation to test benches ........................................................................... 5
7 Warnings ........................................................................................................ 5
8 Technical drawings ........................................................................................ 7
FA- -e-2020 3 BA
1 Introduction
Please read these operating instructions carefully before commissioning, even if you
already have experience with SAUTER measuring instruments.
After receipt of the force gauge, it should be checked in advance that no transport
damage has occurred, that the outer packaging, the plastic housing, other parts or
even the gauge itself have not been damaged. If any damage is evident, please
notify SAUTER GmbH immediately.
The FA can measure tensile and compressive forces very accurately and it is easy to
operate. It can be held in the hand for measurements or mounted on a suitable test
stand.
Please ask SAUTER or the SAUTER supplier or visit our website
www.sauter.eu.


Product specificaties

Merk: Sauter
Categorie: Meetapparatuur
Model: FA 50

Heb je hulp nodig?

Als je hulp nodig hebt met Sauter FA 50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur Sauter

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur