Saturn ST-FP0090 Handleiding

Saturn Vleesmolen ST-FP0090

Lees hieronder de 📖 handleiding in het Nederlandse voor Saturn ST-FP0090 (21 pagina's) in de categorie Vleesmolen. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

ST-FP0090

MEAT GRINDER

ЭЛЕКТРОМЯСОРУБКА

ЕЛЕКТРОМ’ЯСОРУБКА

MEAT GRINDER

Dear Buyer!

We congratulate you on having

bought the device under trade

name “Saturn”. We are sure that

our devices will become essential

and reliable assistance in your

housekeeping.

Avoid extreme temperature

changes. Rapid temperature change

(e.g. when the unit is moved from

freezing temperature to a warm

room) may cause condensation

inside the unit and a malfunction

when it is switched on. In this case

leave the unit at room temperature

for at least 1.5 hours before

switching it on.

If the unit has been in transit, leave

it indoors for at least 1.5 hours

before starting operation.

Please read thoroughly for

important safety

DESCRIPTION

1. Food pusher

2. Hopper plate

3. Head

4. Feed screw

5. Cutting blade

6. Cutting plate (ﬁne)

7. Fixing ring

8. Box cover

9. Locking knob

10. Cutting plate (coarse)

11. Cutting plate (medium)

12. Motor housing

13. OFF switch

14. ON switch

15. R switch

16. Sausage attachment

17/18. Kebbe attachment

19. Accessory box

IMPORTANT SAFEGUARDS

♦Household use only.

♦Read these instructions for use

carefully before using the appliance.

♦Keep these instructions for use for

future reference.

♦Check, if the voltage indicated on

the appliance corresponds to the local

mains voltage before you connect the

appliance.

♦Never use any accessories or parts

from other manufactures. Your

guarantee will become invalid, if such

accessories or parts have been used.

♦Never try to replace the parts and

repair the unit by yourself. Contact an

authorized service center for qualiﬁed

examination and repair.

♦Do not use the appliance if the

mains cord, the plug or other parts are

damaged.

♦If the mains cord of this appliance

is damaged, it must always be replaced

by manufacture or a service center

authorized, in order to avoid hazardous

situations.

♦Thoroughly clean the parts that

will come into contact with food before

you use the appliance for the ﬁrst time.

♦Unplug the appliance immediately

after use and before cleaning.

♦Use only the pusher to push

ingredients down the feed tube while

the appliance is running.

♦Keep the appliance out of the

reach of children.

♦Never let the appliance run

unattended.

♦Switch the appliance oﬀ before

detaching and install any accessory.

♦Wait until moving parts have

stopped running before you remove the

parts of the appliance.

♦Never immerse the motor unit in

water or any other liquid. Use only a

moist cloth to clean the motor unit.

♦Do not attempt to grind bones,

nuts or other hard items.

♦Continuous running of meat

grinder should be not more than 10

min. Before it's used again, it must cool

down enough, about 10 min.

♦Reverse function is prohibited

while the appliance is operating (For

example, switch "ON" knob to "R" knob

or on the contrary), wait at least one

minute until grinder has come to a

complete stop. Otherwise it may result

in damaging of the appliance.

♦To avoid jamming, do not apply

excessive pressure while operating.

♦When the circuit breaker activates,

do not switch on.

♦To protect against the risk of

electrical shock, do not immerse the

unit, cord or plug in water or other

liquid.

♦This appliance is not intended for

use by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning

use of the appliance by a person

responsible for their safety. Not

recommended for usage by children till

the age of 14.

♦Children should be supervised to

ensure that they do not play with the

appliance.

♦Service life – 4 years.

FOR THE FIRST TIME

♦Check that voltage indicated on

the rating label corresponds the mains

voltage in your home.

♦Wash all parts (except body) in

warm soapy water.

♦Before plugging in, ensure the

"ON/OFF/ Reverse" switch is turned to

"OFF" position.

REVERSE FUNCTION

♦In case of jamming, switch the

appliance oﬀ by turning the "R / ON"

switch to "R" position and "ON/OFF/

Reverse" switch to "R" position. Feed

screw will be rotating in the opposite

direction, and the head will get empty.

ASSEMBLING

♦Holding the head and insert it in

the inlet with one hand, revolves toward

left (ﬁg.2).

♦Place the feed screw into the head,

long end ﬁrst, by turning the feed screw

slightly until it is set into the motor

housing (ﬁg.3).

♦Place the cutting blade onto the

feed screw shaft with the blade facing

the front as illustrated (ﬁg.4). If it is not

ﬁtted properly, meat will not be ground.

♦Place the desired cutting plate

next to the cutting blade, ﬁtting

protrusions in the slots (ﬁg.5).

♦Support or press the centre of the

cutting plate with one ﬁnger then screw

the ﬁxing ring until tight with another

hand (ﬁg.6). Do not over tighten.

♦Place the hopper plate on the head

and ﬁx into position.

♦Locate the unit on a ﬁrm place.

♦The air passage at the bottom and

the side of the motor housing should be

kept free and not blocked.

MINCING MEAT

♦Make sure the unit is unplugged

while assembling.

♦Cut foods into pieces (sinewless,

boneless and fatless meat is

recommended, approximate size: 20

mm x 20 mm x 60 mm), so that they ﬁt

easily into the hopper.

♦Plug in and turn the "R / ON"

switch to "ON" position. Turn the

"ON/OFF/ Reverse" switch to "ON".

Place food in the hopper tray and use

the food pusher to feed food into the

hopper opening.

CAUTION: DO NOT USE YOUR

FINGERS TO FEED FOOD THROUGH THE

HOPPER

♦Feed foods into the hopper plate.

Use only the food pusher (ﬁg.7).

♦After use switch the unit oﬀ and

unplug it from the power supply.

MAKING KЕBBE

RECIPE STUFFING

Mutton 100g

Olive oil 1 1/tablespoons

Onion (cut ﬁnely) 1 1/tablespoons

Spices to your taste

Salt to your taste

Flour 1 1/tablespoons

Mince mutton once or twice.

Fry onion until brown and add minced

mutton, all spice, salt and ﬂour.

OUTLET COVER

Lean meat 450g

Flour 150-200g

Spices to your taste

Nutmeg (cut ﬁnely) 1

Powdered red pepper to your taste

Pepper to your taste

♦Mince meat three times and mix all

ingredients together in a bowl. More

meat and less ﬂour for outlet cover

creates better consistency and taste.

♦Grind the mixture three times.

♦Disassemble by reversing the

steps from 5-3 to remove the cutting

plate and cutting blade.

♦Place kebbe attachments A and B

onto the feed screw shaft together,

ﬁtting protrusions in the slots (ﬁg.8).

♦Screw ﬁxing ring into place until

tight. Do not over tighten (ﬁg.9).

♦Make the cylindrical outlet cover

(ﬁg.10).

♦Form kebbe as illustrated below

and deep fry.

Product specificaties

Merk:	Saturn
Categorie:	Vleesmolen
Model:	ST-FP0090
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gebruikershandleiding:	Ja
Makkelijk schoon te maken:	Ja
Vermogen:	1600 W
Inhoud bak/kan:	0 l
Aan/uitschakelaar:	Ja
Reverse:	Ja
Handvat(en):	Nee
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 Hz
Worst-cap:	Ja
Worsthoorn:	Ja
Kebbe-maker:	Ja
Accessoireopbergvak:	Ja
Materiaal trechter:	Roestvrijstaal