Sanyo PID-42AE1 Handleiding

Sanyo Monitor PID-42AE1

Lees hieronder de 📖 handleiding in het Nederlandse voor Sanyo PID-42AE1 (22 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/22

INSTRUCTION MANUAL PID-42AE1

PID-42AS1

LCD Monitor

Please read this Instruction book before using your LCD monitor.

We wish you many hours of pleasure from your new LCD monitor.

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . 2

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . 3

Installation and Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SERVICING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Federal Communications Commission Notice . . . . . . . . . 5

AC Power Cord Requirement . . . . . . . . . . . . . . . . . . . . . . 6

End-User License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Step: 1 Mains Connection . . . . . . . . . . . . . . . . . . . . . . . . . 8

Step: 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Remote control battery installation . . . . . . . . . . . . . . . . . . 9

Controls and Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

MENU OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Time menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

PC Adj. menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

INSTALLATION MODE . . . . . . . . . . . . . . . . . . . . . . . 13

Installation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Selection of picture size . . . . . . . . . . . . . . . . . . . . . . . . . .14

PIP/POP Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

OPERATION (IN TEXT MODE) . . . . . . . . . . . . . . . . . 16

Teletext Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

SPECIFICATIONS/HELPFUL HINTS . . . . . . . . . . . . . .17

Specication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Helpful hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING

LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

RS232C COMMAND TABLES . . . . . . . . . . . . . . . . . . 20

TABLE OF CONTENTS

Standard monitor (PID-42AE1)

● EXTENSIVE INPUT & OUTPUT TERMINALS (for all products)

This monitor set has various input and output terminals including component (Y,Pb,Pr) or RGBHV input and output with 5-BNC, composite

video input and output with BNC, and RS-232 control port (serial D-Sub 9) input and output which offer the daisy chain connection. There

are computer inputs (a D-Sub 15 RGB terminal) and DVI-D input with HDCP for High denition signals. There are also jacks for external

speakers.

Daylight readable monitor (PID-42AS1)

In addition to Standard monitor, it has adaptive brightness in accordance with prevailing light conditions.

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective

corporation.

GB GB

CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but

improper use can result in potential electric shock or re hazards. In order not to defeat the safeguards incorporated in this monitor observe the

following basic rules for its installation, use and servicing.

Installation and Use

Do not allow anything to rest on the power

cord. locate this LCD monitor where the Do not

cord will be damaged by people walking on it.

Do not overload wall outlets and extension

cords as this can result in re or electric shock.

A suitable socket outlet must be provided near

to the monitor and shall be easily accessible.

Do not place this LCD monitor near any heat

sources such as radiators, heaters, stoves and other heat-generating

products (including ampliers).

Do not place your LCD monitor on an unstable stand, shelf or table.

Serious injury to an individual, and damage to the LCD monitor may

result if it should fall. Your sales person can recommend an approved

wall mounting kit. A special wall mounting kit is available for this

model.

This LCD monitor should be operated only from the type of power

source indicated on the monitor or as indicated in the Operating In-

structions. If you are not sure of the type of power supply, consult your

sales person or your local power company.

For added protection it is strongly recommended that this LCD

monitor has its mains supplied via an approved earth fault protection

device.

WARNING: To prevent injury the LCD monitor must be securely

attached to the wall in accordance with the manufacturers installation

instructions.

IMPORTANT:

This product must be earthed.

This unit is not disconnected from the mains unless the mains lead is

unplugged. The installer must make sure that the mains plug is easily

accessible.

Do not use immediately after moving the LCD monitor from a low

temperature to a high temperature environment, as this causes con-

densation, which may result in re, electric shock, or other hazards.

Before cleaning, unplug the monitor from the wall socket.

Do not mount near an open ame source. Open ames must never

be used near this LCD monitor.

This LCD monitor should not be built in or enclosed in any way, heat

build up will reduce the life of the monitor.

This LCD monitor should have a minimum distance of 5cm away from

the wall and the monitor should have 10cm distance around the top

and sides.

Always mount using recommended and substantial xtures and t-

tings.

10cm

5cm

Do not cover the ventilation slot on the LCD monitor. Heat build-up

can reduce the service life of your LCD monitor, and can also be

dangerous.

Do not apply liquid cleaners or aerosol cleaners directly onto the LCD

monitor. Use a damp cloth for cleaning.

ADDITIONAL FOR NORTH AMERICA AND CANADA:

This NOT monitor must be permanently mounted to the building

structure. It must be mounted in such a way that it can be removed

using basic tools.

The NOT power supply cord must be attached to the building surface.

The power supply cord must be routed through walls, ceiling, NOT

oors, or other similar openings in the building structure.

The MUST power supply cord be positioned so as to prevent physical

damage.

Important: (UK only)

THIS PRODUCT MUST BE EARTHED.

This equipment is tted with an approved mains lead and an

approved non rewireable UK mains plug. To change a fuse in this

type of plug proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 13 Amp A.S.T.A. or

BSI approved type.

3. Ensure that the fuse cover is correctly retted.

If the fuse cover is lost or damaged the plug must be used NOT

but replaced with a serviceable plug.

If the tted plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug tted in its place. If the mains plug

contains a fuse, this should have a rating of 13 Amp, ensure the

fuse cover is correctly tted. If a plug without a fuse is used, the

fuse at the distribution board should not be greater than 13 Amp.

Note: The severed plug must be destroyed to avoid a possible

shock hazard should it be inserted into a 13 Amp socket else-

where.

The wires in this mains lead are coloured in accordance with the

following code:

Blue Neutral

Brown Live

Green and Yellow Earth

1. The Blue wire must be connected to the terminal which is

marked with the letter “N” or coloured BLACK.

2. The Brown wire must be connected to the terminal with the

letter “L” or coloured RED.

3. The Green and Yellow wire must be connected to the terminal

which is marked with the letter “E” or coloured GREEN or

GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is

clamped over the sheath of the lead - not simply over the wires.

Do not attempt to bypass the safety purpose of the grounding

type plug.

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UN-

LESS THE MAINS LEAD IS UNPLUGGED.

THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS

EASILY ACCESSIBLE.

SAFETY PRECAUTIONS

GB GB

Product specificaties

Merk:	Sanyo
Categorie:	Monitor
Model:	PID-42AE1
Kleur van het product:	Zwart
Gewicht:	18000 g
Breedte:	1010 mm
Diepte:	100 mm
Hoogte:	603 mm
Gebruikershandleiding:	Ja
Beeldschermdiagonaal:	42 "
Resolutie:	1920 x 1080 Pixels
Type aansluitplug:	3,5 mm
Kijkhoek, horizontaal:	178 °
Kijkhoek, verticaal:	178 °
Typische contrastverhouding:	1000:1
Helderheid:	500 cd/m²
Microfoon, line-in ingang:	Ja
PC Audio-uitgang:	Ja
Componentingang video (YPbPr/YCbCr):	1
Gemiddeld vermogen:	12 W
Stroomverbruik (in standby):	0.8 W
HDCP:	Ja
HD type:	Full HD
Ingang stroom:	Ja
Audio-ingangen:	Ja
Audio-uitgang:	Ja
Responstijd:	9 ms
Pixel pitch:	0.4845 x 0.4845 mm
Paneelmontage-interface:	400 x 400 mm
DVI-D poorten:	1
Geïntegreerde TV Tuner:	Nee
Ingebouwde camera:	Nee
Plug and play:	Ja
Temperatuur bij opslag:	-20 - 60 °C
Aantal SCART-poorten:	1
Productontwerp:	Digitale signage flatscreen
Stroomverbruik (typisch):	200 W
Bedrijfstemperatuur (T-T):	0 - 40 °C