Sanus BSA-IWP701 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sanus BSA-IWP701 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Verify Wall Compatibility
This Cable Kit is designed to fit into both
interior and exterior walls constructed with:
Minimum Space into Wall: 3 in.
Minimum Drywall Thickness: 1/2 in.
Verify TV Plug Fit
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE SAVE THESE INSTRUCTIONS
CAUTION: Avoid potential personal injuries and property damage!
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Do not use this product for any purpose not explicitly specified by manufacturer.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
customer service at 1-800-359-5520.
Tools Needed
Tape Measure
This product conforms to and should be properly grounded in compliance with requirements of the current National Electrical Code or
codes administered by local authorities.
All electrical products may present a possible shock or fire hazard if improperly installed or used. This product may bear the mark of a
Nationally Recognized Testing Laboratory and should be installed in conformance with current local and/or the National Electrical Code.
WARNING: RISK OF FIRE AND SHOCK. Do not connect the modules 01 or 02 to any other circuits or outlets.
CAUTION: RISK OF FIRE AND SHOCK. ONLY intended for use on 15 ampere branch circuits. Do not install power supply cord 03
within wall cavity.
Pencil Phillips Screwdriver
Paint (optional)
Surfaces are paintable
to match your decor
Electric Drill
WARNING: This product contains small items that could be a choking
hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are
missing or damaged, do not return the damaged item to your dealer; contact Customer
Service. Never use damaged parts!
MAX
1 ⅛ in. (29 mm)
BEFORE DRILLING ANY HOLES:
Make sure your TV plug fits in the upper
module 01 .
Legrand AV Inc. and its aliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the
information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the
information contained herein. Legrand assumes no responsibility for accuracy, completeness or suciency of the information contained in this document.
©2022 Legrand AV Inc. All rights reserved. Made in China.
Legrand AV Inc. 6436 City West Parkway; Eden Prairie, MN 55344 USA
STEP 1
Upper Module
Driver Bit
(hole saw)
Hole Saw
3 in.
Lower Module Power Cord 03
04
0502
01
Assemble
Hole Saw
abDrill Holes
Drill Holes
TIP: Drill the top hole
BEHIND your TV.
05
04
04
01
Maximum Distance: 6 feet
Maximum
Height:
5 feet
6901-603103
Model BSA-IWP701
OWNERS GUIDE
Cable Concealer Power
Grommet Kit
Supplied Parts and Hardware
NOTE: Walls
with blown-in type
insulation may
require removal
of some insulation
inside the cavity.
Drywall
Stud
Back Wall
Thank you for choosing SANUS!
Please take a moment to let us know how we did:
1-800-359-5520 info@sanus.com
6436 City West Parkway, Eden Prairie, MN 55344
Fish Tape 07
Hole Saw Handle 06
Note: Attach and use hole
saw handle 06 provided
to manually drill holes if an
electric drill isn’t available.
STEP 5
Power UpInsert Modules in Wall Secure Modules
STEP 3 STEP 4STEP 2
Route Cables
Removal
TV Plug
Standard Outlet
a
c
TV and Accessories
Power Cord
bRemove
trim plate
Turn screws
to remove
module
Loosen ONLY enough
to remove module.
Unplug
power cords
Low Voltage Cable(s)
Low Voltage Cable(s)
DO NOT over tighten screws
NOTE: The gaskets
can be removed for larger
cables.
DO NOT loosen
the screws
Assemble and use the fish tape 07
provided to pull the cables through the wall.
Replace
Trim Plate
Replace
Trim Plate
Remove
Trim
Plate
Remove
Trim
Plate
02
01
02
01
01
01 03
02
Low Voltage
Cable(s)
[if needed]
3X
3X


Product specificaties

Merk: Sanus
Categorie: Niet gecategoriseerd
Model: BSA-IWP701

Heb je hulp nodig?

Als je hulp nodig hebt met Sanus BSA-IWP701 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sanus

Sanus

Sanus CALW01 Handleiding

17 November 2024
Sanus

Sanus VF3012 Handleiding

17 November 2024
Sanus

Sanus CFR2144 Handleiding

17 November 2024
Sanus

Sanus FPA400 Handleiding

17 November 2024
Sanus

Sanus LSF110 Handleiding

4 November 2024
Sanus

Sanus VLF828 Handleiding

4 November 2024
Sanus

Sanus VSF817 Handleiding

4 November 2024
Sanus

Sanus VLFS820 Handleiding

4 Oktober 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd