Sansui SLED2280 Handleiding

Sansui LCD Plasma televisie SLED2280

Lees hieronder de 📖 handleiding in het Nederlandse voor Sansui SLED2280 (56 pagina's) in de categorie LCD Plasma televisie. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/56
22” CLASS WIDE LED TV
TÉLÉVISEUR DEL GRAND ÉCRAN CATÉGORIE 22 PO
OWNER’S MANUAL
GUIDE D’UTILISATION
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaßtre le code numérique cor-
respondant au téléviseur.
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.
If not using Cable TV, set this menu option to the “Air” position.
Lorsque l’appareil sort de l’usine, l’option « Signal Type » est en mode « Cable » (cĂąblodistribution). Si vous
n’utilisez pas la cĂąblodistribution, sĂ©lectionnez l’option « Air ».
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l’appareil, veuillez lire le prĂ©sent guide attentivement.
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL
S’IL FAUT CONTACTER LE SERVICE CLIENTÈLE, PRENEZ SOIN D’ÊTRE MUNI
DU NUMÉRO DE MODÈLE AVANT D’APPELER.
CUSTOMER SERVICE – 1-800-289-0980
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980
ORION WEBSITE
SITE WEB ORION
FOR INFORMATION ON OUR OTHER PRODUCTS AND RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS ET LE RECYCLAGE, VEUILLEZ VISITER NOTRE SITE WEB:
www.orionsalesinc.com
FRANÇAIS ENGLISH
SLED2280
3AV0121A.indb 13AV0121A.indb 1 3/24/10 3:11:19 PM3/24/10 3:11:19 PM
2
ENGLISH
Location of the required Marking
The rating sheet and the safety caution are on the
rear of the unit.
The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the
FCC Rules could void the user's authority to operate this equipment.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY
FROM THIS PRODUCT AT TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Record the model number and serial number.
Model number _______________ Serial number _______________
3AV0121A.indb 23AV0121A.indb 2 3/24/10 3:11:23 PM3/24/10 3:11:23 PM
3
ENGLISH
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as
vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into
the unit.
19) If an outside antenna or cable system
is connected to the unit, be sure the
antenna or cable system is grounded
to provide some protection against
voltage surges and built-up static
charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in
wire to an antenna discharge unit, size
of grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA LEAD IN WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE
3AV0121A.indb 33AV0121A.indb 3 3/24/10 3:11:25 PM3/24/10 3:11:25 PM

Product specificaties

Merk: Sansui
Categorie: LCD Plasma televisie
Model: SLED2280

Heb je hulp nodig?

Als je hulp nodig hebt met Sansui SLED2280 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding LCD Plasma televisie Sansui

Sansui

Sansui HDLCD1955 Handleiding

28 December 2022
Sansui

Sansui SLED2228 Handleiding

28 December 2022
Sansui

Sansui SLED1980 Handleiding

28 December 2022
Sansui

Sansui DTV1900 Handleiding

28 December 2022
Sansui

Sansui SLED1937 Handleiding

28 December 2022
Sansui

Sansui LCDVD150 Handleiding

28 December 2022
Sansui

Sansui SLED4650 Handleiding

28 December 2022
Sansui

Sansui HDLCDVD260 Handleiding

28 December 2022
Sansui

Sansui HDLCDVD265 Handleiding

28 December 2022
Sansui

Sansui HDLCD2212 Handleiding

28 December 2022

Handleiding LCD Plasma televisie

Nieuwste handleidingen voor LCD Plasma televisie

Orion

Orion TV22QBKCC925DVD Handleiding

15 September 2024
Sanyo

Sanyo DP32640 Handleiding

22 September 2023
Sanyo

Sanyo DP50741 Handleiding

22 September 2023
Sanyo

Sanyo DP42841 Handleiding

22 September 2023
Yakumo

Yakumo 81 j Handleiding

1 September 2023
D.BOSS

D.BOSS PDP 4219 Handleiding

23 Augustus 2023
Magnavox

Magnavox 40MF401B Handleiding

19 Juni 2023
Fujitsu Siemens

Fujitsu Siemens MYRICA VQ40-1 Handleiding

14 Augustus 2023
Fujitsu Siemens

Fujitsu Siemens MYRICA PQ50-1 Handleiding

14 Augustus 2023
Metz

Metz linus 32 hdtv 100 Handleiding

26 Juli 2023