Sansui HDLCD1955 Handleiding

Sansui LCD Plasma televisie HDLCD1955

Lees hieronder de đź“– handleiding in het Nederlandse voor Sansui HDLCD1955 (50 pagina's) in de categorie LCD Plasma televisie. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/50
ESPAĂ‘OL ENGLISH
19" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER
TELEVISOR LCD TFT DE 19" CON SINTONIZADOR DIGITAL
HDLCD1955
HDLCD1955A
OWNER’S MANUAL
MANUAL DE INSTRUCCIONES
Before operating the unit, please read this manual thoroughly.
Antes de usar la unidad, lea detenidamente este manual de instrucciones.
ATTENTION
ATENCION
If you purchase a universal remote control from your local retailer, please contact the remote manufac-
turer for the required programming code.
Si usted a comprado un control de remoto universal, por favor comunicase con el fabricante para el
cĂłdigo de programaciĂłn requerido.
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL
SI REQUIERE CONTACTAR SERVICIO AL CLIENTE POR FAVOR TENGA EL NĂšMERO DE
MODELO LISTO ANTES LLAMAR
CUSTOMER SERVICE – 1-800-289-0980
SERVICIO AL CLIENTE – 1-800-289-0980
ORION WEBSITE
SITIO WEB DE ORION
FOR INFORMATION ON OUR OTHER PRODUCTS AND RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
PARA INFORMACIĂ“N SOBRE OTROS PRODUCTOS E INFORMACIĂ“N SOBRE RECICLAJE,
POR FAVOR VISITE NUESTRO SITIO WEB EN
www.orionsalesinc.com
AIR/CABLE MODE SELECTION
SELECCION DE MODO DE AIR/CABLE
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode. If
not using Cable TV, set this menu option to the “Air” position.
Al salir la unidad de fábrica, la opción Signal Type se ajusta al modo de “Cable” (Televisión por cable).
Si no utiliza CATV, ajuste esta opción de menú al modo de “Air”.
37I0421B_EnSp.indb 137I0421B_EnSp.indb 1 3/12/09 1:28:30 PM3/12/09 1:28:30 PM
2
ENGLISH
Location of the required Marking
The rating sheet and the safety caution are
on the rear of the unit.
The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the
FCC Rules could void the user's authority to operate this equipment.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY
FROM THIS PRODUCT AT TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
The lamp(s) within this product contain mercury.
Disposal should be in compliance with local, state or
federal laws.
Record the model number and serial number.
Model number _______________ Serial number _______________
37I0421B_EnSp.indb 237I0421B_EnSp.indb 2 3/12/09 1:28:34 PM3/12/09 1:28:34 PM
3
ENGLISH
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as
vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into
the unit.
19) If an outside antenna or cable system
is connected to the unit, be sure the
antenna or cable system is grounded
to provide some protection against
voltage surges and built-up static
charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in
wire to an antenna discharge unit, size
of grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA LEAD IN WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE
37I0421B_EnSp.indb 337I0421B_EnSp.indb 3 3/12/09 1:28:35 PM3/12/09 1:28:35 PM

Product specificaties

Merk: Sansui
Categorie: LCD Plasma televisie
Model: HDLCD1955

Heb je hulp nodig?

Als je hulp nodig hebt met Sansui HDLCD1955 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding LCD Plasma televisie Sansui

Sansui

Sansui HDLCD1955 Handleiding

28 December 2022
Sansui

Sansui SLED2228 Handleiding

28 December 2022
Sansui

Sansui SLED1980 Handleiding

28 December 2022
Sansui

Sansui DTV1900 Handleiding

28 December 2022
Sansui

Sansui SLED1937 Handleiding

28 December 2022
Sansui

Sansui LCDVD150 Handleiding

28 December 2022
Sansui

Sansui SLED4650 Handleiding

28 December 2022
Sansui

Sansui HDLCDVD260 Handleiding

28 December 2022
Sansui

Sansui HDLCDVD265 Handleiding

28 December 2022
Sansui

Sansui HDLCD2212 Handleiding

28 December 2022

Handleiding LCD Plasma televisie

Nieuwste handleidingen voor LCD Plasma televisie

Sanyo

Sanyo DP32640 Handleiding

22 September 2023
Sanyo

Sanyo DP50741 Handleiding

22 September 2023
Sanyo

Sanyo DP42841 Handleiding

22 September 2023
Yakumo

Yakumo 81 j Handleiding

1 September 2023
D.BOSS

D.BOSS PDP 4219 Handleiding

23 Augustus 2023
Magnavox

Magnavox 40MF401B Handleiding

19 Juni 2023
Fujitsu Siemens

Fujitsu Siemens MYRICA VQ40-1 Handleiding

14 Augustus 2023
Fujitsu Siemens

Fujitsu Siemens MYRICA PQ50-1 Handleiding

14 Augustus 2023
Metz

Metz linus 32 hdtv 100 Handleiding

26 Juli 2023
Tatung

Tatung v26mmfj-et1 Handleiding

22 December 2022