Sana 878 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sana 878 (16 pagina's) in de categorie Sapcentrifuge. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Instruction Manual
[ Home use only / Warranty card included separately ]
Sana 878
vertical juicer
02
TABLE OF CONTENTS
P.02
P.03
P.04
P.04
P.05
P.06
P.07
P.08
P.09
P.10
P.11
P.12
P.13
P14
01 Read all points thoroughly.
02 Follow all safety precautions.
03 Precautions are classified as follows.
1. Thoroughly read all precautions.
2. After reading the manual, keep it in a
convenient location for future reference.
3. Do not use it in countries which use a different
voltage than 230-240 V.
4.Any quality improvements are subject to
change without notice.
Read this manual before first use
1. Safety precautions
heavy object on top of the product or wedge it into
a narrow space.
Do not modify, disassemble, or attempt to repair
the product.
Do not insert any foreign objects such as a finger
or screwdriver into any crack or hole in the product
body. It may cause a fire, electric shock, injury, or
malfunction.
If the power plug is damaged, do not repair it
yourself. It must be replaced by an authorized
service center
Do not wet or splash water on the motor base.
Dont operate the power switch with wet hands.
For safety, make sure to plug the product into a
grounded outlet. Do not ground it to a gas pipe,
plastic water pipe, or telephone line.
Never diassemble any parts of the juicer or insert
foreign objects such as a finger or spoon into the
juicer while it is running.
Do not use it within reach of children. Children
should be carefully supervised so that they do not
play with this device. There is a risk of an injury or
malfunction if children accidentally hit or misuse
the product.
The product should only be used by those who
are familiar with it. Anyone with physical or mental
problems, or who lacks experience with the
product, should not use it without supervision.
Do not use the product while wearing or holding
any magnetic items. Magnetic fields near the
product may cause malfunction.
Only operate the product when all parts are
properly assembled.
If there is a gas leak, do not plug in the product.
Open windows and thoroughly ventilate the area.
If the auger stops or jams during operation, turn
the dial to the [REV] direction and hold it there 3 to
5 seconds to activate the reverse operation. Then,
turn the dial again to [ON] to resume normal oper-
ation. If the motor is left in the [ON] position while
jammed, it can overheat or become damaged.
Do not move, assemble, or disassemble the
product while it is operting. Turn off and unplug the
product first.
When using the product, be careful while wearing
ties, necklaces, scarves, and other things that could
be pulled into the product.
Only use this product on a at and stable surface.
When inserting ingredients into the inlet, only use
the pusher. Do not insert any foreign objects like a
knife, spoon, chopticks, etc. into the juicer.
Do not use the product for more than 30 minutes
continuously, as this can overheat the motor. If
overheating occurs, turn off the motor for at least 5
minutes before operating it again.
Do not drop or cause any excessive shock to the
product.
Warning This mark denotes risk of
serious injury or death.
Do not plug or unplug power cord with wet
hands.
Use only the voltage specified on the warranty
card and product specifications. Incorrect voltage
may cause electric shock, fire, or motor damage.
Connecting to a different voltage may reduce the
motor's lifespan or lead to a malfunction.
Securely plug the power cord plug tightly into an
outlet.
Do not bend, tie, damage or pull the power cord
by force, or place it near high temperatures or heat
sources such as a gas stove. Do not place any
1. Safety precautions
2. Precautions during use
3. Power dial
4. Precautions before juicing
5. Ingredient preparation
6. Assembly
7. Silicone parts
8. How to use
9. If the juicer jams
10. Sorbet screen
11. Disassembly and cleaning
12. Troubleshooting
13. Parts list
14. Specifications
03
English
If the device produces any unusual sounds,
smells, excessive heat, or smoke, stop using it
immediately and contact an authorized service
center. The smell caused when using a new
product will naturally go away over time.
Always unplug the product when not in use. Be
sure to pull the plug itself, and not the power cord.
Do not wash the product or parts at a
temperature of 80°C (175F) or higher. Do not place it
in a dishwasher, dryer, microwave, etc. It may cause
damage or deformation.
The product weighs approximately 6.2 kg. When
moving the product, make sure to securely hold
the main body securely with both hands from the
bottom. Do not lift it by the chamber or hopper,
or by the sides of the main body, as it can fall and
cause damage or bodilty injury.
Do not use this product for commercial use. It is
designed for home use only. Heavy commercial
use may cause damage or premature wear to the
motor or parts.
Make sure to thoroughly understand how to
prepare ingredients before juicing. Improperly
prepared ingredients may result in poor
performance or damage to the product.
Ingredients needing careful preparation:
- Soft produce such as ripe kiwi, mangoes,
bananas, or strawberries can build up inside
the chamber and hopper and not be extracted
properly. We recommend adding firmer produce
like carrots, firm apples, or celery to help process
softer ingredients.
- For nut milks, nuts or seeds should be soaked
in water for at least 4 hours (preferably overnight)
and rinsed before processing.
Ingredients unable to be juiced
- Do not process hard ingredients such as pitted
fruit (remove pits first), coffee beans, firm seeds,
etc.
- Do not juice canned or processed fruits or
vegetables.
- Do not process ice or frozen fruit.
We recommend drinking fresh juice right away
for maximum flavor and nutrition. Store juice in the
refrigerator up to 72 hours. For best results, store
in a vacuum container.
Do not use this product to grind grain or coffee
beans.
Do not process the pulp from juicing.
Do not let the motor run for longer than a few
seconds before adding ingredients.
Do not insert ingredients into the hopper above
the limit mark.
2. Precautions during use
Do not operate it for more than 30 minutes
continuously. Allow the motor to cool at least 5
minutes if run for 30 minutes.
Do not insert anything into the juice or pulp
outlet druing operation.
When inserting ingredients, do not use anything
other than the pusher. Foreign objects can
damage the parts or cause bodily injury.
Do not operate the power switch with wet hands.
- It may cause electric shock, short circuit or fire.
Clean any foreign substances on or near the
power switch.
Use the juicer with the juice cap open.
- The juice can flow backwards into the hopper if
the juice cap is closed while juicing.
Do not use if the top of the motor body is wet
from extracted juice or water.
Note
1. Old or overripe ingredients can lose their juice
content, and will produce very little or no juice. Only
use fresh and firm produce.
2. If the product is not cleaned immediately after
use, the pulp may dry and make later disassembly
or cleaning difficult. It can also cause reduce yield
through clogged screens.


Product specificaties

Merk: Sana
Categorie: Sapcentrifuge
Model: 878

Heb je hulp nodig?

Als je hulp nodig hebt met Sana 878 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Sapcentrifuge Sana

Handleiding Sapcentrifuge

Nieuwste handleidingen voor Sapcentrifuge