Samsung SSA-P400 Handleiding

Samsung Soundbar SSA-P400

Lees hieronder de 📖 handleiding in het Nederlandse voor Samsung SSA-P400 (80 pagina's) in de categorie Soundbar. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/80
Quick Guide
SSA-P400
SSA-P400T
SSA-P401
SSA-P401T
Contents
Product Introduction 2
Installation and External Connection 6
Initialization 14
ENG FRE GER SPA ITA
2
_
Product Introduction
Product Introduction
WHAT’S INCLUDED
Check if the following items are included in the product package.
xGn
Main Unit Quick Guide
CD Manual Diode (x12)
(UF4004, 1N4001~4007)
Main Board
1 2 3
4
5
6
7
8
9
11121314
10
15
17
22
16
25
18
19
20
21
23
24
QUICK GUIDE
English_3
ENG
1
Board ID Setup Switch
The address number specifi ed by the address setup switch should
match that of the host computer as it is used for communications with
the host computer.
2
I/O Board Connection Port
Communication ports to connect to the I/O board, which include Input
#8 through Input #15 and Output #8 through Output #15.
3
System Initialization Switch
Pressing both of the switches at the same time for about 2 seconds will
sound initialization ready beep. Releasing both switches will stop the
beep, and restarts the system after the initialization.
4
Output (Relay #1 ~ Relay #4)
Ports
4 relay outputs (FORM-C(COM, NO, NC)) are provided. (DC12~18V,
Max Current 2A)
5Output (TTL #1 ~ TTL #3)
Ports Address Setup Switch
3 TTL output ports are provided.
The voltage depends on the output occurrence, DC 0V for no output
occurrence, and DC 5V for any output occurrence.
6RJ-45 Connect the LAN cable for TCP/IP communications.
7RS-232 Communication Port One RS-232 communication port is provided. Used to exclusively
connect to a PC in a local area.
8RS-422 Communication Port One RS-422 communication port is provided.
You can establish up to 32 multi-drop communications.
9
Power Connection Port
DC +12V is used for the power source.
10 LED Extension Port
Port used to extend the power and communication indicators so that
they can display in an external device.
11
TCP/IP Module LED Indicator
For TCP/IP module communications, the status of the TCP/IP module
will be provided additionally.
12
Power LED Indicator
Power connection status indicator. It always stays ON while the power
is applied.
13
Output LED Indicator Output status indicator for the output port. A fl ashing indicator denotes
the occurrence of any output.
14
Keypad Connection Port Optional item.
15
LCD Connection Port Optional item.
16
TCP/IP Module Connection Port
The TCP/IP module is optional so it is not provided by default.
Communication can be established using the built-in TCP/IP module.
Communication with the PC can be established using the built-in TCP/
IP module.
17
Firmware ROM This must be replaced before the fi rmware update; you can check the
current fi rmware version.
18
Reader #1 Port The fi rst reader connection port.
19
Reader #2 Port The second reader connection port.
20
Reader #3 Port The third reader connection port.
21
Reader #4 Port The fourth reader connection port.


Product specificaties

Merk: Samsung
Categorie: Soundbar
Model: SSA-P400

Heb je hulp nodig?

Als je hulp nodig hebt met Samsung SSA-P400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Soundbar Samsung

Handleiding Soundbar

Nieuwste handleidingen voor Soundbar