Samsung HG40AD590BK Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Samsung HG40AD590BK (63 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 246 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/63
Thank you for purchasing Samsung product.
To receive more service, please register your
product at
www.samsung.com
Model Serial No.
LED TV
Installation manual
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer-
controlled system for hotels and other hospitality businesses.
Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, theTV switches to ONLINE mode
and full control is through the SBB/STB.
If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol.
Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states :
•ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent
guests from trying to cheat the system by disconnecting the SBB/STB.
Power
ON
Hotel TV
Online Mode
Poll Rate 20/sec
Stand-alone
Mode
Hotel Mode On SBB/STB Online if
one success within
10 attempts
SBB/STB
Online-10
consecutive
fails
SBB/STB
Status-
Attempt
every 2secs
To set the details for Stand-alone or interactive mode, refer to pages 17-20 (Setting the hotel option data : Stand-alone mode and Interactive
mode)
•Some operations may be restricted to prevents guests from "cheating" the TV system.
• No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)
•Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news
bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect
image quality. To reduce risk of this effect, please follow below recommendations:
•Avoid displaying the same TV channel for long periods.
•Always try do display any image on full screen, use TV set picture format menu for best possible match.
•Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout
process.
•Frequently use all TV features designed to reduce image retention and screen burnout. Refer to the relevant user manual section for details.
Securing the Installation Space
Keep required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
•Using parts provided by another manufacturer may result in a problem with the product or injuries due to the product falling.
The appearance may differ, depending on the product.
Installation with a stand. Installation with a wall-mount.
10 cm10 cm
10 cm
10 cm10 cm
10 cm
10 cm
3
Contents
ENGLISH
English
yAccessories 4
.............................................................................................................................................
yInstalling the LED TV Stand 5
......................................................................................................................
yViewing the Connection Panel 6
..................................................................................................................
yViewing the Remote Control 10
.....................................................................................................................
yConnecting the MediaHub HD 14
.................................................................................................................
yConnecting the RJP (Remote Jack Pack) 15
.................................................................................................
ySetting the Hotel Option Data 17 ..................................................................................................................
y
Installing the Wall Mount 56 ..........................................................................................................................
y
Securing the TV to the Wall 57
......................................................................................................................
yAnti-theft Kensington Lock 57
.......................................................................................................................
ySpecifications 58 ..........................................................................................................................................
yDimensions 59
..............................................................................................................................................
yLicence 62
....................................................................................................................................................
4English
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items’ colour and shapes may vary depending on the model.
• Remote Control & Batteries (AAA x 2)
• Quick Set up Guide
• Cable Holder
• Power Cord / Data Cable
• Owner’s Instructions
Safety Guide (Not available in all locations)
The stand and stand screw may not be included, depending on the model.
The Data Cable may not be included, depending on the SI Vendor.
5
English
Installing the LED TV Stand
Stand Components
When installing the stand, use the provided components and parts.
1 EA
A
32" 40"
1 EA
B
32" 40"
x8 (M4 X L12)
32"
40" x4 (2ea)
(M4 X L14)
C
Stand Guide Stand Screws
HG32AD590 / HG40AD590
1
2
B
A
C
x4 (M4 X L12)
Front
Top View
Rear
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
ATTENTION
Side View
(Correct assembly)
(Incorrect assembly)
32" 40"
Place a soft cloth over
the table to protect the
TV, and then place the
TV on the cloth screen
side down.
Insert the Stand Guide
into the slot on the
bottom of the TV.
When the declination
happened, try reassemble
it
2
category.
Make sure to
assembling stand guide
attached on the TV.
34
C
32"
x4 (M4 X L12)
40"
x4 (M4 X L14)
Progress the assembly of screw in the
manual’s order.
C
x4 (M4 X L14)
Front
Rear
A
B
NOTE
• Make sure to distinguish between the front and back of each component when assembling them.
• Make sure that at least two persons lift and move the TV.
6English
Viewing the Connection Panel
1
2
5 6 7 8 9 0
3 4
1
2 4 0
3
7
6
5
98
HG32AD590
HG40AD590
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
8English
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the
resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920
x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly,
referring to the user guide of the computer or its graphic card.
The resolutions in the table are recommended.
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync Polarity
(H / V)
IBM 720 x 400 31.469 70.087 28.322 -/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-
-/-
-/-
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 960
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
60.000
47.712
55.935
60.000
65.290
67.500
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
60.000
60.015
59.887
60.000
59.954
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
108.000
85.500
106.500
108.000
146.250
148.500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/+
-/+
+/+
+/+
-/+
+/+
-/+
+/+
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
9
English
TV Controller
TV Controller is a multi directional button that helps navigate without using the remote control.
Some functions which require a PIN code may not be available.
The product colour and shape may vary, depending on the model.
Exits the menu when pressing the controller for more than 1 second.
When selecting the function by moving the controller to the up/down/left/right directions, do not press the controller. If
the controller is used first, you cannot operate it to move the up/down/left/right directions.
TV Controller
Function menu
Remote control sensor
The image is drawn by facing the
front side of the TV.
Power on Turn the TV on by pressing the controller in standby mode.
Adjusting the volume Adjust the volume by moving the controller from side to side when the power is on.
Selecting a channel Select a channel by moving the controller up and down when the power is on.
Using the function menu Press the controller when the power is on and the function menu appears. If you
press it again, the function menu screen disappears.
Using the Menu Selects the by moving the controller in the function menu screen. The MENU( )m
OSD(On Screen Display) of your TV’s feature appears.
Selecting the Source Selects the by moving the controller in the function menu screen. The Source( )s
Source list screen appears.
Selecting the SMART HUB
( )
With the Function menu visible, select ( ) by moving the Controller SMART HUB
upwards. The SMART HUB main screen appears. Select an application by moving
the Controller, and then pressing the Controller.
Power Off Selects the to turn the TV off by moving the controller in the function Power Off( )P
menu screen.
To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second.
Standby mode
Do not leave your TV in standby mode for long periods of time a small amount of electric power is still consumed even when
the power button is such as when on holiday. off. It is best to unplug the power cord.
10 English
Viewing the Remote Control
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.
CONTENT
CLOCK
ALARM
SOURCE
GUIDE
HOME
Turns the TV on and off.
Have direct access to channels.
Alternately selects Teletext, Double
or Mix.
Adjust the volume.
Display channel list on the screen.
Display the main on-screen menu.
Quickly select frequently used
functions.
Select on-screen menu items and
change menu values.
Return to the previous menu.
Buttons in the , Channel list
Contents Home menu, etc.
Use these buttons in the Contents
Home.
Display and select available video
sources.
Electronic Programme Guide (EPG)
display.
Cut off the sound temporarily.
Change channels.
Switch to the HOME Screen.
View the .Contents Home
Press to display information on the
TV screen.
CLOCK INFO: When you press key
in standby mode, TV screen displays
the time.
Exit the menu.
ALARM: Enter the hour you want the
TV to turn on.
X: Turns the 3D image on or off.
( Not available )
SUBT.: Displays digital subtitles.
11
English
Installing batteries (Battery size: AAA)
X
Z
Y
NOTE
• Use the remote control within 7m of the TV.
• Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon
signs.
• The colour and shape may vary depending on the model.
• Remote control button 'HOME' & '3D' are not supported. When pressing these buttons, the TV unit does not
respond.
12 English
Connecting the TV with SBB
ETH MODEM
TV Rear Panel
Data Cable
1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.
Use data communication.
List of Vendors and Compatible Data Cables Supplied with the TV
• Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables.
CON BCON A
1
6
6
1
STB SIDETV SIDE
CON A
6: NC
5: IR
4: GND
3: Rx
2: Tx
1: Nc
1: NC
2: GND
3: Rx
4: NC
5: Tx
6: IR
CON BCON A CON B
65
24
53
32
13
English
Audio Loop In
An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation
procedures are given below.
• Detailed Drawing of the Headphone Box.
HEADPHON BOX
TV Rear Panel
Headphone Box
TV Headphones jack
Whitewire (Audio-L)
Shield Wire
T kV HP-ID jac
Red wire + White wire
Red Wire (Audio-R)
Shield wire
<Headphone Box>
14 English
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
HDMI USB RS/232
TV Rear Panel
MediaHub HD Rear
2
HDMI cable
1
RS-232
Data Cable
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN 1(DVI), 2(ARC) port of the TV and the HDMI port of the MediaHub HD.
• MediaHub HD
The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external
source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/Inactive
sources. The TV switches to the Active external source.
You have to connect the HDMI of the MediaHub to the port of the TV.HDMI IN 1(DVI)
When the TV is on, connect the TV and the RJP within 10 seconds.
• Special features
PIP
Auto Detection
15
English
Connecting the RJP (Remote Jack Pack)
Output to any external source connected to RJP on the hotel desk.
USB HDMI VIDEO AUDIO AUDIO/PC
RS/232
TV Rear Panel
RJP Rear
3
1
D-sub / PC Audio cable
2
HDMI cable
1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2. Connect the HDMI IN 1(DVI), 2(ARC) port of the TV and the HDMI port of the RJP.
3. Connect the RJP port of the TV and the RS/232 port of the RJP.
The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660
(HD Plus).
• R
JP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
You can select , HDMI IN 1(DVI) 2(ARC) and AV IN for connecting RJP.
When the TV is on, connect the TV and the RJP within 10 seconds.
16 English
• The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10
seconds. All LEDs blink 5 times to acknowledge that this has beennished.
• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The
LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If
the guest then touches another source button, the TV will change to the selected source and the corresponding LED will
be lit.
• After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV
and the RJP.
• The following table shows the approximate time in seconds to switch from the TV to the input source, based on the
priority.
Scenario 1: When no inputs are connected.
Source To Connect
AV 2 Sec
PC 0.7 Sec
HDMI 3.9 Sec
Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.
Source Disconnect To Connect Total
AV 4.5 Sec 2 Sec 6.5 Sec
PC 0.7 Sec 0.7 Sec 1.4 Sec
HDMI 3.9 Sec 3.9 Sec 7.8 Sec
E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP is
in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5
seconds.
• To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF.
• A/V, PC and HDMI input sources are supported.
18 English
Hotel TV Function Description
Category Item
Channel
Channel Rescan
Message
When there is a mismatch between the data in the channel map and the transmitted data, the TV
autotunes the channels to restore the data/parameters in the channel map.
•ON: When Channel Rescan Message is ON, the OSD showing that the channels are being
rescanned will be displayed to Hotel Guests.
•OFF: A Hotel Admin can turn the Channel Rescan Message OFF, if the rescan message OSD
should not to be displayed to Hotel Guests.
Mychannel Enable or disable the Mychannel feature.
Genre Editor Edith the genre for channels. (Available when Mychannel is On)
TTX Widescreen Mode Widen the subtitle section to fit the screen width.
Menu OSD
Picture Menu Lock Enable or disable the Picture Menu.
Menu Display •ON : Main Menu display.
•OFF : Main Menu No display.
Tools Display Hide or show the Tools menu.
Channel Menu Display Hide or show the Channel menu.
Panel Button Lock
Turning the front panel (local key) operations on/off.
•Unlock : Unlocks all panel keys.
•Lock : Locks all panel keys.
•OnlyPower : Locks all panel keys except the Power panel key.
•Menu/Source : Locks the Menu and Source panel keys.
Home Menu Display OFF : The Home Menu is not displayed.
ON : The Home Menu is displayed.
Home Menu Editor Edit Home Menu.
Home Menu Auto Start ON : The Home Menu is Auto Start.
OFF : The Home Menu is not Auto Start.
Clock
Clock Type OFF : No clock option of Factory menu shall work. Only Main menu.
SW Clock : SW clock shall work only.
Local Time
Select the method to update the clock data.
•Manual: Use clock data from DVB channel or manual clock setting When the TV is in the stand-
alone mode.
•TTX: Bring up the time information from the TTX stream.
•Time Channel: Use clock data from the selected Channel type and Channel num.
Timer Type
Enable or disable the alarm function.
•WakeUp : Enable the alarm function to turn on the device at the specified time.
•OnOff : Disable the Alarm function.
Music Mode Music Mode PC
To get music output from an mp3/audio player through a PC Input Source. When on, you can hear
sound from the player through the TV even there is no video signal. The TVs backlight, however,
remains on. And add a video signal,it works normally.
Music Mode Backlight Backlight On/Off option in Music mode to save energy.
Remote
Jack Pack
Priority PC If the jack priority is set, the corresponding source is automatically set when a jack is inserted
according to the jack priority.
Priority HDMI If the jack priority is set, the corresponding source is automatically set when a jack is inserted
according to the jack priority.
HDMI Option Select which HDMI source of the TV is connected to the RJP jack.
External
Source
USB Pop-up Screen
When USB is connected to the TV,
•Default : A popup window appears.
•Automatic : This Enters the USB content menu automatically.
•Disable : Nether the pop-up window nor the menu appears.
External Source
Banner
Users can set External Source Banner to On or Off.
•ON : When TV power is On or the Mode changes, the TV will displays the external source banner.
•OFF : When TV power is On or the Mode changes, the TV does not display the external source
banner.
External
Source
Auto Source
•OFF : Auto Source is Off.
•ON : When an external source is connected to the TV, the TV will auto-ident and switch the input
source.
•PC : Auto Ident PC Input only.
Anynet+ Return Source Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This fuction is
especially useful for the Guestlink RJP.)
19
English
Hotel TV Function Description
Category Item
HP
Management
HP Mode
•ON: When the Headphone is connect to the TV, allows you to listen to audio through the TV's
speakers and the connected headphones simultaneously. But, you can only adjust the volumes
of TV speaker.
•OFF: When the Headphone is connect to the TV, allows you to listen to audio through the
connected headphones only.
Default HP Volume Configure the values of headphones' volume when HP Mode is set to ON.
Main Speaker •ON: Plays the TV sound through the TV speaker.
•OFF: Plays the TV sound through the headphones only.
Eco Solution Energy Saving
Adjusts the brightness of the TV to reduce power consumption.
•Off: Turns off the energy saving function.
•Low: Sets the TV to low energy saving mode.
•Medium: Sets the TV to medium energy saving mode.
•High: Sets the TV to high energy saving mode.
Logo/
Message
Welcome Message Displays on Welcome Message.
Edit Welcome Message Edit the Welcome Message.
Hospitality Logo Turns the Hospitality logo feature On or Off, if On, when the TV isturned on, the Logo is displayed,
before the signal from the initial source, for the amount of time set in "Logo Display Time"
Hospitality Logo DL
Downloads the Hospitality logo.
Hospitality logo file requirements:
•BMP or AVI files only.
•Max file size : BMP - 960 X 540. AVI - 30MB.
•The file can only be named samsung.bmp or samsung.avi.
Logo Display Time Set the logo display time (3/5/7 Seconds).
Cloning
Clone TV to USB Clone the current TV option values to a USB memory device.
Clone USB to TV Clone the saved TV option values in a USB memory device to the TV.
Setting Auto Initialize
When Setting Auto Initialize is set to On, and the power is turned off and on or the Master Power is
turned off and on, the data is restored to the cloned values. If there is no cloned value, even when
the Setting Auto Initialize is set to On, it will be ignored and the operation will be the same as that
when Setting Auto Initialize is set to Off.
REACH
Solution
REACH 3.0 ON : The feature of REACH 3.0 in this TV becomes available.
OFF : The feature of REACH 3.0 in this TV becomes not available.
REACH Channel Assign a DTV channel number to carry the update REACH data. This channel number must be the
same as the number set on the Reach server.
Group ID Select the Group ID of the REACH server.(Refer to the REACH server manual for more details.)
Ticker ON : The Ticker content is displayed.
OFF : The Ticker content is not displayed.
REACH Update Time
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH contents is
downloaded from the REACH server to the TV :
1hour : Every hour
2hour : Every 2 hours
12:00 am : Every 12:00 a.m.
12:00 pm : Every 12:00 p.m.
2:00 pm : Every 2:00 p.m.
REACH Update
Immediate
ON : Whenever the TV enters standby mode (the power cord is plugged in and the power is off),
the REACH data is updated on the TV.
OFF : The REACH data is only updated on the TV at the REACH server update time.
Room Number Set the Room Number.
REACH Server Version The version of REACH Server is displayed.
Network
Network Setup Set an IP address to establish an Internet connection.
SmartHub Model
Setting Set SmartHub Model.
SmartHub Setting Set up SmartHub.
20 English
Hotel TV Function Description
Category Item
Widget
Solution
Widget Mode Widget Mode ON/OFF.
Solution Type Select type of solution (Vender Server/ SINC Server).
Server URL Setting Set server URL.
License Server IP
Setting Set server IP.
IPTV Mode IPTV mode On/Off.
Virtual Standby
Virtual Standby mode On/Off.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W (Depending on the size
of the TV screen).
Instant On Setup booting mode.
Room Num Setting Set Room Number.
System
Self Diagnosis
for TV
Enter Self Diagnosis Menu.
•Picture Test: Use to check for picture problems. If the problem appears in the test picture, select
Yes and follow the directions on the screen.
•Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs
during the test, select Yes and follow the directions on the screen.
Self Diagnosis for HTV
HD Function Check Menu On Executing Item Below OSD is displayed ProIdiom DTV Channel Key
Loss : Ok/Failure (Hotel US) STB SI Vendor
Setting : SI Name Ok/Failure
Bathroom AMP : Ok/Failure (Hotel EU)
RTC : Ok/Failure (Hotel EU)
SW Update SW USB Update function.
Service Pattern Same function with SVC Service Pattern.
Sound Bar Out
ON: TV speaker sound will be mute. Sound will come out through HDMI.
You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.
Contact Samsung Display the web site of related Samsung service center, software version, and Mac address
information when the TV has a problem.
Standby LED
When the TV is in standby mode, you can configure the settings of external LED.
•ON: The LED is on.
•OFF: The LED is off.
TV Reset Returns all settings on the TV to their factory defaults.
21
English
Welcome Message
The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room.
Welcome message settings are found in the Hotel Option Menu.
Welcome message should be ON in order to display the message on power-on.
Hospitality Mode Standalone
Widget Solution
SI Vendor
OFF
System
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Sou erc
Bat hroom Speaker
HP Management
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
r
Welcome Message
ON
Edit Welcome Message
Hospit ality Logo
OFF
Hospit ality Logo DL
...
Logo Display Time
...
A welcome message can be up to 25 characters and it can be edited by changing the text in the Hotel Service
menu.
The following is the list of characters supported by Welcome message:
Capital letters, from A-Z
Welcome message can be edited by using the navigation, colour & enter key on the Remote in the “Edit Welcome
Message” OSD.
Move Enter Return
_
Move to left
Move to Right
Leave Black
Done
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
W E L C O M E
Edit Welcome Message
A
B
C
D
The Welcome message and hotel logo cannot both be active at the same time.
22 English
Hotel Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is initially powered on.
Hospitality Logo settings are the Hospitality mode menus.
The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed
when the TV is turned on.
The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has been
loaded into the TV.
Hospitality Mode Standalone
Widget Solution
SI Vendor
OFF
System
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Sou erc
Bat hroom Speaker
HP Management
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
r
Welcome Message OFF
Edit Welcome Message
Hospitality Logo BMP
Hospitality Logo DL
Logo Display Time 5 Second
• Hospitality Logo
This option lets you choose whether the Hospitality Logo image is displayed or not.
Initial value is OFF.
Can be set to or ON.OFF
When set to ON, the Logo Download and Logo Time Display menu items become accessible.
• Hospitality Logo DL
This option lets you download the logo image to the TV’s memory from a USB device.
A wait message appears while the image is being copied to the TV.
A "completed" message appears when the copy operation finishes successfully.
The word "failed" appears if the copy operation was unsuccessful.
No USB appears if no USB device is connected.
No File appears if there is no file to copy on the USB device or or the file is in the wrong format must be a BMP file.
If No File appears and there is a logo file on the USB device, check the file format.
• Logo File Format
The TV supports only BMP and AVI format.
The file name must be samsung.bmp or samsung.avi.
The maximum resolution of the BMP format is 960 x 540.
The maximum file size for AVI format is 30MB.
The TV does not change the size or scale of the image.
23
English
USB Cloning
USB Cloning is used to download user-configured settings (Picture Sound Input Channel Setup Hotel Setup, , , , , and )
from one TV set and upload them to other TV sets.
All the user-dened settings from the TV (Master Set) can be copied to the USB device.
• Cloning from TV to USB: This copies stored data from the TV set to the USB
device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order.
• MUTE 119ENTER
3. Clone TV to USBPress the or button to select▲ ▼ ”, then press the ENTER
button.
4. Clone TV to USBWhen the message “ ” is displayed, press the ENTER button.
5. You can verify USB cloning behavior.
• In Progress: during copying data to USB.
• Completed: copy was finished successfully.
• Failed: copy was notnished successfully.
• No USB: USB is not connected.
• Cloning from USB to TV: This to downloads the stored data in the USB device to
TV set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order: MUTE 119
ENTER
3.
Pre
ss the or button to select “Clone USB to TV”, then press the ▲ ▼ ENTER
button.
4. When the message “Clone USB to TV” is displayed, then press the button.ENTER
5. You can Make sure USB cloning behavior.
• In Progress: copying data to TV.
• Completed: copy finished successfully.
• Failed: copy did notnish successfully.
• No USB: USB is not connected.
• No File: there is no file to copy on the USB.
Activate copying from USB to TV by pressing key for 5 seconds.ENTER
The Hotel TV product family does not support the function between models that supports the satellite / T2 CLONE
operation and models that do not.
For fast, instant cloning during installation,
insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds.
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
24 English
Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture,
Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all of the menu values on your hospitality TVs to
the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can
change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function to on, the
TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV is turned off
and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which
have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to
on.
Menu Menu Item
Picture
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Apply Picture Mode
Picture Size
Picture Size
Zoom/Position
4:3 Screen Size
Auto Adjustment
PC Screen Adjustment
Coarse
Fine
Position
Image Reset
PIP
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Colour Space
White Balance
Gamma
Motion Lighting
Picture Options
Colour Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
LED Clear Motion
Picture Off
Reset Picture
Sound
Sound Mode
Sound Effect
DTS TruSurround HD
DTS TruDialog
Equaliser
Speaker Settings
Additional Settings
DTV Audio Level
Audio Format
Audio Delay
Dolby Digital Comp
Auto Volume
Reset Sound
Menu Menu Item
System
Accessibility
Audio Description
Subtitle
Menu Transparency
High Contrast
Enlarge
Football Mode
Menu Language
Smart Control Settings
Motion Sensitivity
Touch Sensitivity
Onscreen Remote Size
Voice Control
Language
Use TV Voice
Voice Gender
Device Manager
Keyboard Settings
Mouse Settings
Time
Clock
Sleep Timer
Alarm
Eco Solution
Energy Saving
Eco Sensor
No Signal Power Off
Auto Power Off
Smart Security
Auto Protection Time
Change PIN
General
Game Mode
Sound Feedback
Boot Logo
Samsung Instant On
Anynet+(HDMI-CEC)
DivX® Video On Demand
25
English
Plug & Play
Hotel Plug & Play automatically performs Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup.
Hotel Plug & Play is available only one time when power is first turned ON.
This is available after first setting up the TV and transferring Clone TV data to a USB drive.
To use next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV.
Depending on model and region, some menus may not exist.
Local Set
Current Localset : EU
Change Local Set if Locat ed in North America, Lat in America and Europe.
In other regions, Please press SKIP button move to t he next st ep.
Change Skip
Local Set
EU
Warning! T V might not function if Local Set is not correct ly configured.
When Local Set is changed, TV will turn off automat ically to apply it.
Countries List
Bulgaria, Croat ia, Czech, Estonia, Greece, Hungary, Lat via, Lithuania,
Romania, Serbia, Slovakia, Slovenia, EU-Ot hers
Next
Essential Details
Next
Previous
Please Select your country.
This is basic set up to use your Smart T V.
Country Bulgaria
Picture Mode Standard
Easy Set Up
Intercactive
(Hotel Menu)
Standalone Setup
(Continue Setup)
Standalone Only
(End Set up)
c
Next
If you select this, Easy
setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy
setup.
Auto Tuning
Next
Previous
Select Bot h to scan f or both
Terrestrial or Cable channels
and
Satellit e channels.
How do you get your broadcast signal?
c
Both
Satellite
Terrestrial/Cable
Auto Tuning
Next
Previous
Select t he connected aerial t h at
you want to use to get channels.
To receive channels, configure the opt ions belows then
select Scan.
Aerial Terrestrial
Channel Type Digital & Analogue
Scan
Auto Tuning
Ne
x
t
P
r
e
v
ious
Auto t uning is finding channels for you...
Stop
Channel 7
Digital
0
- TV 0
- Radio 0
- Data/Other 0
Analogue 0
2%
Auto Tuning
Next
Previous
Auto T uning complet ed.
Change settings Scan Again
Digital
0
- TV 0
- Radio 0
- Data/Other 0
Analogue 0
Select your Language
Next
Press the
u r dl
buttons
to move the highlight.
Press the enter button to
select.
Select your language to start the on screen set up.
The Language Set ting will be applied t o Main Menu and not Plug and Play.
c
English
Fraçais
Deutsch
Italiano
Polski
Clock
Next
Previous
Set current date and time
You can adjust your time t o set DST , Time Zone and clock
mode
Clock Mode Auto
Date -- / -- / ----
Time -- : --
Time Zone Auto
DST Off -- : --
TV Setup Complete!
Previous
Your TV is now ready to use.
OK
E
E
E
E
E E
If you select Skip
If you select
Standalone Setup
Select your language
E
E
E
E
E
If you change the
country of the Current
Location
If you select
Change The TV is
automatically turned
off and on
26 English
• Plug & Play OSD
Initial Highlight: Interactive
If Standalone Only button is selected, Standalone hotel mode is set by default and “ Standalone mode is set
OSD is displayed for 3 seconds.
TV enters into RF mode automatically after displaying “ ” OSD for 3 seconds.Standalone mode is set
When Interactive mode is selected, the Interactive Setup Menu appears. Press the power off button to exit from the
Interactive menu.
When Standalone Plug & Play mode is selected, the “Select Menu Language” OSD is displayed.
• Select Menu Language OSD
When Standalone Plug & Play is selected from “ OSD, “Easy Set Up Select Menu Language OSD is displayed.
Initial Highlight : English
Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
If the button is pressed, “ ” OSD is displayed.ENTER Select Area
• Select Country
Initial Highlight: United Kingdom.
The Country OSD is displayed and the area can be selected.
• Clock setting OSD
Display time: 30 seconds.
The Clock Set item OSD is displayed
If button is pressed after setting the clock or in Auto, Picture Mode OSD is displayed.ENTER
• Auto Search Mode OSD
If skip option is selected, this goes to Clock setting OSD.
If the button is pressed, auto searching of channels is performed.ENTER
The OSD Display time, from the time that Auto Store is started to the time that Auto Sort is completed, is 30
seconds.
• Picture Mode OSD
Initial Highlight: Standard.
The Picture Mode OSD is displayed and the Dynamic or a Standard Picture mode can be selected.
After selecting the picture mode and the TV enters Standalone Setup Menu OSD, press power off to exit.
27
English
Multi Code Remocon
Multi Code Remocon is a special transmitter which is designed to control each TV with one remote.
This is useful where there is more than one TV in a location, such as in a hospital the set ID number is displayed in the
source osd. It is possible to support up to 9 different remote key transmissions for multiple codes.
Each TV has an initial code of "0".
The ID code can be set and reset in Analogue TV mode or PC mode. (not available in TTX channel or DTV channel.
ID code can be from 0 to 9.
Press the button and the MUTE RETURN button simultaneously for more than 7 seconds and then select the
number button to set the code.
Set ID OSD appears.
The following words appear:Remote control code is set to X. If you want to change the Remote control code,
enter the chosen digit.” X is the digit number.
This OSD displays until Exit is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
For example, TV and Remote will be set to ID code #1 if the user presses #1.
The following words appear:Remote control code is changed to 1” At this point, the TV can be controlled only by
the remote with the same ID code as the TV.
TV, the following words will be displayed. “ TV ID x”(x is the TV’s ID)
To reset the ID code, press the button and the MUTE EXIT button simultaneously for more than 7 seconds. When
you stop pressing the buttons, the ID code for both the TV and Remote are reset to “0”. “Remote control code is
set to 0. appears.
28 English
CH Bank Editor (Smoovie TV Only)
Channel Bank Editor edits channels, with 3 different Bank Options.
Depending on the Bank card, there are specific channels Hotel customers can enjoy.
Setting the CH Bank Editor under Stand-alone Mode
1. Enter the Hotel Standalone menu by “MUTE+1+1+9+Enter
2. SmooviePlease select SI vendor :
3. Channel Bank Editorfind the new menu option, “
4. Channel Bank EditorEnter the “
Hospitality Mode
Standalone
REACH Sever
SI Vendor
OFF Network
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
<Depending on model and region, some menu items may not exist>
5. Edit the channel bank like below example.
a. BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card.
b. BANK2 (Family Card - Green): Select the channel that will be used when remote has a .GREEN CARD
c. BANK3 (Adult Card - Red): Select the channel that will be used when remote has a .RED CARD
n Move E Select/Deselect R Return
Channel Bank Edit
Registered
Bank1 (4
) B
ank2 (6) Bank3 (36)
1 1futech
c
2 BBC1
ccc
3 24ore.tv
ccc
4 C3
c c
5 BBC World
c c
6 C5
c c
7 Coming Soom
c c
8 S2
c
9 S2
c
References of using SMOOVIE Remote Controller
1. SMOOVIEIf you select as the SI vendor, you should use the Remote Controller.SMOOVIE
2. With the Numeric keys of the remote controller, users can select only the channel. Bank1
To change the channel using the Green or Red Card, please use channel up/down keys.
3. Bank1For the Channel guide or the Channel list, users can see only channel list.
29
English
Channel Editor
Channel Editor edits channel number a and name.
Use Channel Editor to sort the channels as user-desired channel numbers.
Hospitality Mode Standalone
Widget Solution
SI Vendor
OFF
System
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Sou erc
Bathroom Speaker
HP Management
Eco Solut ion
Logo/Message
Cloning
REACH Solution
Network
r
Channel Editor
<Depending on model and region, some menu items may not exist>
Simple Steps for channel Editor under Stand-alone Mode
Step Broad Outline
1 Operate ‘Channel Auto Store’ in Hotel Option Menu
2 Enter ‘Channel Editor’ in Hotel Option Menu
3 Compile a table related to the final channel lists you want to have
4 Rearrange channels with the Button based on the table you compiled TOOLS
5 Press the or Button to exit.EXIT RETURN
<please refer to the following details>
Smoovie On sequence
Step
Smovie TV used (Air/ Cable )
Mixed Channel Map On (Air and Cable both used) Only Air or Cable used Only Air or Cable used
If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done
1Do the P&P, except channel
store Enter Hotel menu Do the P&P all (Air or Cable
auto tune) Enter Hotel menu
2After P&P TV shows hotel
menu
Setup Mixed Channel Map
On
After P&P TV will show hotel
menu
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3Setup Mixed Channel Map
On TV power off & on
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel
menu
4 Make TV power off & on Enter Hotel menu Select smoovie TV in Hotel
menu Select Channel Setup
5 Enter Hotel menu Select smoovie TV in Hotel
menu
Select Channel Setup
(can be skipped)
Select "Air" or "Cable" to
auto tune
6Select smoovie TV in Hotel
menu Select Channel Setup Select "Air" or "Cable" to auto
tune (can be skipped) setup CH Bank Editor
7 Select Channel Setup Select "Air + Cable" to auto
tune Setup CH Bank Editor After power off & on, user can
use TV
8Select "Air + Cable" to auto
tune Setup CH Bank Editor After power off & on, user can
use TV
9 Setup CH Bank Editor After power off & on, user can
use TV
10 After power off & on, user can
use TV
30 English
Step
Smovie TV used( Satellite )
Mixed Channel Map On (Satellite and Air or Cable both
usedused) Only Satellite used
If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done
1Do the P&P except channel
store Enter Hotel menu Do P&P all: Air or Cable auto
tune) Enter Hotel menu
2After P&P TV will show hotel
menu Setup Mixed Channel Map On after P&P TV shows hotel
menu
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3 Setup Mixed Channel Map On Make TV power off & on
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel
menu
4 Make TV power off & on Enter Hotel menu Select smoovie TV in Hotel
menu Select Channel Setup
5 Enter Hotel menu Select smoovie TV in Hotel
menu
Select Channel Setup (can be
skipped) Select Satellite to auto tune
6Select smoovie TV in Hotel
menu Select Channel Setup Select Satellite to auto tune
(can be skipped) Setup CH Bank Editor
7 Select Channel Setup Select Satellite to auto tune Setup CH Bank Editor After power off & on, user can
use TV
8 Select Satellite to auto tune Setup CH Bank Editor After power off & on, user can
use TV
9 Setup CH Bank Editor After power off & on, user can
use TV
10 After power off & on, user can
use TV
Channel List
You can view channel information, , , , , or . All TV Radio Data/Other Analogue Favourites 1-5
When you press the button on the remote control, CH LIST Channel List screen displays immediately.
Channel List Guide AllShare Play Schedule Manager Source
Contents Home
R Return
* The displayed image may differ depending on the model.
• All: Shows all currently available channels.
• TV: Shows all currently available TV channels.
• Radio: Shows all currently available radio channels.
• Data/Other: Shows all currently available MHP or other channels.
• Analogue: Shows all currently available analogue channels.
• Favourites 1-5: Shows all favourite channels.
If you want to view added favourite channels press the button and use the CH LIST L(Ch. Mode) button to move
between .Favourites 1-5
Using the control buttons with the Channel List.
• T (Tools): Displays the option menu.
• L : Move to the , , , , or .(Ch. Mode / Channel) All TV Radio Data/Other Analogue Favourites 1-5
• When you select the Programme View in T(Tools) (Channel) menu, you can move to other channels using L
button.
• E (Watch / Information): Watches the channel you selected. / Displays details of the selected programme.
• k : Move to the next or previous page.(Page)
31
English
How to use Schedule Viewing in Channel List
(digital channels only)
When you set the in , you can only set the programme in .Schedule Viewing Channel List Programme View
1. Press the CH LIST button, then select a desired digital channel.
2. Programme ViewPress the TOOLS button, and then select . The programme list for that channel appears.
3. Press the / buttons to select the desired programme, then press the ( ) or button.▲ ▼ ENTEREInformation INFO
4. Schedule ViewingSelect , then press the ENTERE button when done.
If you want to cancel , follow steps 1 through 3. Select Schedule Viewing Cancel schedule.
Using Option Menu t
Set each channel using the menu options ( , , , Channel List Programme View Edit Favourites Lock/Unlock Edit Channel
Name Edit Channel Number Delete Information Sort, Edit Mode, , , , ).
Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Programme View: Displays the programme when a digital channel is selected.
Edit Favourites Favourites 1-5: Set channels you watch frequently as favourites. Add or delete the selected channel in .
1. Edit FavouritesSelect the , then press the ENTERE button.
2. Favourites 1-5Press the ENTERE button to select , then press the button.OK
One favourite channel can be added to several favourites among .Favourites 1-5
Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
This function is available only when the is set to .Channel Lock On
The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option.
Edit Channel Name (analogue channels only): Assign your own channel name.
Edit Channel Number (digital channels only): Edit the number by pressing the number buttons.
Some areas may not be able to support and Edit Channel Name Edit Channel Number.
Delete: You can delete a channel to display the channels you want.
Information: Displays details of the selected programme.
Sort: Changes the list ordered by channel number or channel name.
Edit Mode: Select desired channels and edit them.


Product specificaties

Merk: Samsung
Categorie: Niet gecategoriseerd
Model: HG40AD590BK

Heb je hulp nodig?

Als je hulp nodig hebt met Samsung HG40AD590BK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Samsung

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd