Samsung CS21B860AD Handleiding
Samsung
Televisies
CS21B860AD
Lees hieronder de š handleiding in het Nederlandse voor Samsung CS21B860AD (33 pagina's) in de categorie Televisies. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/33
English - 1
Connection Panel (depending on the model)
ā
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the
1 (75 Ī©
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
continued...
cable television
network
Rear Panel
or
ā
Please be sure to match the colour coded input terminals
and cable jacks.
Connecting to the RCA Input
The ( - / ) and ( ) connectors are used 1AUDIO L R 2VIDEO
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting Headphones
The (headphone) jack is used for watching a television 3
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
ā¢īWhen both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
COLOUR TELEVISION
CS 21Z50/21Z5721Z43/21Z45/21Z47/
/21Z58/21AE0/21AF0/21AJ0
Ownerās Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
ā¢ The actual configuration of your TV may be different,
depending on your model.
Control Panel (depending on the model)
ļµ You can use the buttons to switch the TV on when it is 3
in standby mode depending on the model.
ļµ The and buttons also have the same function as 2 3
the ā/āŗ/ā²/ā¼ buttons on the remote control.
ļµ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Standby indicator
6 Power on/off
AA68-03974A-02
Audio input
Video input
Headphone jack
Audio input
Video input
Front (or Side) Panel
ā¢ The actual configuration of your TV may be different,
depending on your model.
cable television
network
or
Connecting to the RCA Input
The RCA3 and RCA4 connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video
game device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA5 connectors are used for equipment such as a
DVD with component output.
English - 2
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
ā¢ The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 IPress the ā ā button (On/Off) on the front (or side) of the
television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to āChannel - Auto Storeā on page 3 or āChannel -
Manual Storeā on page 4.
ā¢īī
If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
āSetup - Plug & Playā on page 3.
4 To switch the television off, press the ā ā button (On/Off) I
on the front (or side) of the television.
Switching the Television On and Off
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 POWERPress the button on the remote control while
viewing.
The television is in standby mode.
2 To switch the television back on, simply press it again.
ā
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the āIā
button (On/Off) on the front (or side) of the television.
It is best to unplug the set from the mains and aerial.
Placing the Television in Standby Mode
1 POWER
Used to switch the TV
on and off.
2 Numeric buttons
Used to select channels
directly.
3
-/--
Used to select a channel
numbered ten or over.
Press this button, then
ā--ā symbol is displayed.
Enter the two-digit
channel number.
4 /
Used to increase or
decrease the volume.
5 MENU
Used to display the
on-screen menu or
return to the previous
menu.
6ī ā²/ā¼/ā/āŗ
Used to control the
cursor in the menu.
7
S.MENU
Used to display the
sound menu.
8
TURBO
Used to select the turbo
sound option.
9 DUAL I-II
Used to select the sound
mode.
0 SOURCE
Used to display all of the
available video sources.
!
INFO
Used to view the channel
information and setting
status you selected.
@
PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
#
P /
Used to display the
next or previous stored
channel.
$ EXIT
Used to exit from any
display or return to
normal viewing.
%
MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the , , or MUTE
button.
^ ENTER
While using the
on-screen menus, press
the ENTER button to
activate (or change) a
particular item.
& S.MODE
Used to select the sound
effect.
* P.MODE
Used to select the
picture effect.
( TV
Used to return to the
TV mode when it is in
external input mode.
) EZ.VIEW
Used to display Channel
Grouping, Channel
Minimizer, Channel
Schedule, Music Mode,
Half Mute menu.
Remote Control
(depending on the model)
ā¢ Operation of remote control may be affected by bright
artificial light near to the TV.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not
operate normally, check that the
ā+ā and ā-ā ends of the batteries are
inserted correctly or the batteries are drained.
ā¢ Do not mix battery types, i.e. alkaline and manganese.
English - 3
āī Source List
You can switch between
viewing signal from
connected equipment,
such as a VCR, DVD, set-
top box, and the TV source
(broadcast or cable).
ā¢ You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
Input
Source List
Viewing the Menus
1 MENUPress the button.
The main menu is displayed on the screen. Its left side
has five icons: Input Picture Sound Channel, , , , and
Setup.
2 Press the ā² or ā¼ button to select one of the icons.
Press the button to access the iconās sub-menu.ENTER
3 Press the ā² or ā¼ button to move to items in the menu.
Press the button to enter items in the menu.ENTER
4 Press the ā²/ā¼/ā/āŗ button to change the selected
items. Press the button to return to the previous MENU
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
button on the remote control.
The is Start Plug & Play
displayed. To start Plug
& Play, press the ENTER
button. The menu Language
is displayed.
ā¢īī
The Language menu will automatically appear after
several seconds, even if the
ENTER button is not pressed.
2 Select the appropriated
language by pressing the
ā² or ā¼ button. Press the
ENTER Check button. The
antenna input. is displayed.
ā¢ If any language is not
selected, the language
menu will disappear about
30 seconds later.
continued...
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers
manually and clear any channels you do not wish to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
ā¢ To stop the search before
it has finished, press the
ENTER button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to
āChannel - Sortā. To exit without
sorting, press the EXIT button.
Channel - Auto Store
3 Make sure that the antenna
is connected to the
television (refer to page 1).
Press the button. ENTER
The Area menu is displayed.
4 Press the ā² or ā¼ button to
select your area. Press the
ENTER button.
5 To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
6 Press the button to ā or āŗ
move to the hour or minute.
Set the hour or minute by
pressing the ā² or ā¼ button.
7 When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Re-setting the Plug & Play
Method:
MENU (Setup) āā²/ā¼ ā
ENTER (Plug & Play) āā²/ā¼
ā ENTER
Plug & Play
Enter Skip
OK
Check antenna input.
Area
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
Move Enter
Skip
Plug & Play
OK
Enjoy your watching.
Move Enter
Adjust
Skip
Plug & Play
Clock Set 1 2 : 0 0 am
Move Enter Return
TV
Plug & Play ļµ
Language : English ļµ
Time ļµ
Child Lock ļµ
Blue Screen : On ļµ
Melody : On ļµ
Music Mode : Off ļµ
Setup
Auto Store
P 1 C-- 102MHz
7 %
Enter Skip
Plug & Play
Stop
Plug & Play
Enter Skip
Auto Store
Start
Plug & Play
Enter Exit
OK
Start Plug & Play.
Plug & Play
Move Enter Skip
Language
English
Indonesia
Melayu
TV
AV1
AV2
Component
Move Enter Return
TV Source List
Search
Enter
Return
Stop
P 1 C-- 102MHz
7 %
Area : Belgie
Search Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
Move Enter Return
TV Auto Store
Product specificaties
| Merk: | Samsung |
| Categorie: | Televisies |
| Model: | CS21B860AD |
Heb je hulp nodig?
Als je hulp nodig hebt met Samsung CS21B860AD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Televisies Samsung
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Televisies
- Televisies Philips
- Televisies Sony
- Televisies Panasonic
- Televisies LG
- Televisies Daewoo
- Televisies JVC
- Televisies Aiwa
- Televisies Akai
- Televisies Funai
- Televisies Hitachi
- Televisies Marquant
- Televisies Mitsubishi
- Televisies Sanyo
- Televisies Sharp
- Televisies Superior
- Televisies Sylvania
- Televisies Clatronic
Nieuwste handleidingen voor Televisies
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022