Salus RT 520 TX Handleiding

Salus Thermostaat RT 520 TX

Lees hieronder de 📖 handleiding in het Nederlandse voor Salus RT 520 TX (3 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Button Functions

RT520 / RT520RF Thermostat RXRT520 Receiver

123456

7 8

9 10

1. MENU - enter the menu options, press and

hold for 3 sec to return to main screen or to

deactivate Boost Mode.

2. SELECT - conrm changes and enter menus.

3. DOWN - decrease the temperature and

move through the menus.

4. UP - increase the temperature and move

through menus.

5. BOOST - activate Boost Mode.

6. MANUAL - activate / deactivate Manual Mode.

7. ON - When in Manual Mode, ON will

turn the boiler on.

8. OFF - When in Manual Mode, OFF

will turn the boiler o.

9. AUTO - Receiver operates in automatic

mode according to the thermostat.

10. MANUAL - Receiver output is

controlled by the On/O slide switch.

Issue Date: July 2021

V015

1 32

Introduction

The RT520 and RT520RF are the latest additions to SALUS’ tried and tested RT range of thermostat

heating controls. With a new on-board load compensation feature, they oer the most cost eective

fully compliant Boiler Plus solution on the market providing the homeowner with optimum eciency

and maximum heating control comfort. Available in both wired and wireless RF versions, the new RT520

series include all the features of the previous RT series with a larger more intuitive LCD display and a

handy new suite of additional operational and eciency functions.

Before use please read this manual carefully.

Product Compliance

Safety Information

This product complies with the essential requirements and other relevant provisions of the following EU Directives:

EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU and RoHS 2011/65/EU. Full text of the EU Declaration of

Conformity is available on www.saluslegal.com

Use in accordance to national and EU regulations. Use the device as intended, keeping it in dry condition.

Product for indoor use only. Installation must be carried out by a qualied person in accordance to national

and EU regulations.

868.0-868.6MHz; <13dBm

Technical Specication

RT520 Thermostat RT520TX Thermostat

Thermostat supply 2 x AA alkaline batteries 2 x AA alkaline batteries

Thermostat rating max 3 (1) A -

OpenTherm terminals A / B -

Outputs

Voltage free

NC / NO / COM

terminals

Temperature range 5°C – 33.5°C 5°C – 33.5°C

Temperature accuracy 0.1°C or 0.5°C 0.1°C or 0.5°C

ErP control class V V

Radio frequency - 868 MHz

Dimension [mm] 118 x 95 x 26 [mm] 118 x 95 x 26 [mm]

RXRT520 Receiver

Receiver supply 230 V AC

Receiver rating max 16 (5) A

OpenTherm terminals A / B

Outputs Voltage free NO / COM terminals

Radio frequency 868 MHz

Dimension [mm] 96 x 96 x 26 [mm]

LCD Icon Description

RT520 Thermostat Terminals Description

RXRT520 Receiver Terminals Description

Terminal Description

B / A OpenTherm Communication Wire

NC Switched Live OFF

NO Switched Live ON

COM Common Terminal

Terminal Description

B / A OpenTherm Communication Wire

NO Switch Terminal

COM Common Switch Terminal

L; N Supply (230 V AC)

RT520 Wiring Diagram

OpenTherm - Hot Water

TPI, SPAN

OPENTHERM

RT520TX Wiring Diagram

OpenTherm Power Up and Conguration

COM

RT520

Thermostat

RT520TX

Thermostat

COM

RXRT520

Receiver

AC 230 V

RT520TX

Thermostat

RXRT520

Receiver

AC 230 V

B A

RT520

Thermostat

Always ensure the AC mains power is switched off before installing or working on any

components (this includes replacing the batteries). Use only AA 1.5 V alkaline batteries in the

thermostat. Place the batteries into the battery slot located in the back of the thermostat. Do

not use rechargeable batteries.

Press MENU. Using UP or DOWN, adjust the

temperature and then

press SELECT.

OpenTherm Modulating Control is a method of control used by modern heating systems. Instead of

switching a boiler on and off at intervals, modulating control allows the amount of heat provided by the

boiler to be controlled to match the varying demand from the thermostat. This means the customer has

greater system efficiency, energy saving and room comfort from our heating controls.

Using UP or DOWN, navigate to

Hot Water submenu and

press SELECT.

RT520, RT520TX, RT520RF

Quick Guide

Using UP or DOWN, set the hour

and then press SELECT.

Using UP or DOWN, set the month

and then press SELECT.

Using UP or DOWN, set the

minutes and then press SELECT.

Using UP or DOWN, choose

the time format.

Using UP or DOWN, set the day and

then press SELECT.

Press SELECT to confirm.

1 32

After inserting the batteries, the

thermostat will power up.

Using UP or DOWN, choose your

language and then press SELECT.

Press SELECT.

Using UP or DOWN, select your

temperature accuracy.

Using UP or DOWN, enable or

disable DST (Daylight Saving Time).

Press SELECT to confirm.

When OpenTherm is connected, the

device software will automatically

adjust to the OpenTherm settings.

Press SELECT.

Using UP or DOWN, set the year

and then press SELECT.

Using UP or DOWN, select the

week format.

Press SELECT to confirm.

The text bar indicates that hot

water is in operation.

The thermostat will return to the

main screen. Press any button.

Please make the receiver connections and power the receiver before inserting the batteries

into the thermostat.

SALUS Controls plc

SALUS Controls

Units 8-10

Northﬁeld Business Park

Forge Way

Parkgate

Rotherham

S60 1SD

Email: sales@salus-tech.com

SALUS Controls is a member of the Computime Group.

Maintaining a policy of continuous product development SALUS Controls plc reserve

the right to change speciﬁcation, design and materials of products listed in this brochure

without prior notice.

www.salus-tech.com

Text Bar

AM / PM

Day of the week (numeric)

Holiday Mode On

Temperature Unit

Cooling Mode On

Day of the week (alphabetic)

Manual Mode On

Clock

Heating Mode On

Wireless connection with the

receiver

Program number

Program indicator

Low battery status

Temperature measured / set

Service Mode On

Settings

Boost function

3A 3B

8 9

13A 13B

Press SELECT to confirm.

The thermostat will go to

the main screen.

Using UP or DOWN, select the

program type between: 5

Using UP or DOWN, enter the PIN

code number. Press SELECT to

confirm every digit.

Press SELECT.

Using UP or DOWN, select

TEST and press SELECT.

Individual (set a daily schedule).

Press SELECT to confirm.

Using UP or DOWN, select the due

date and then press SELECT.

Using UP or DOWN, set the

temperature and then

press SELECT.

Press SELECT.

Using UP or DOWN, select the TPI type you want to use.

Press SELECT.

Using UP or DOWN,

select ON or OFF.

Using UP or DOWN,

select ON or OFF.

Press MENU.

Using UP or DOWN, select

the warning period and

then press SELECT.

Press MENU.

+2 (schedule for the working days

and for the weekend);

Press SELECT.

Using UP or DOWN, enter the

phone number. Press SELECT to

confirm every digit.

Using UP or DOWN, set the hour

and then press SELECT.

Press the UP arrow on the interval

at which you want to remove the

temperature, until lines appear

Using UP or DOWN, select the

Span value.

Press SELECT to confirm.

Press SELECT.

Press SELECT to confirm.

Press SELECT.

Using UP or DOWN, navigate to

Landlord submenu

and press SELECT.

Using UP or DOWN, select the

lock temperature and

then press SELECT.

Using UP or DOWN, navigate to

Pairing submenu and press SELECT.

The testing process takes

up to 10 minutes.

The red LED and the green

LED on the receiver

will begin to flash.

The pairing process takes

up to 10 minutes.

All (set one schedule for

the entire week)

Using UP or DOWN, select ON

and press SELECT.

Now you can check your

settings. If you want to

make a change, press UP

or DOWN on the relevant

screen.

Using UP or DOWN, set the

minutes and then press SELECT.

When lines appear, press SELECT

to confirm the removal of that

specific interval

TPI (Time Proportional & Integral) is a self-learning, time-

proportional algorithm. TPI type of regulation ensures economical

system operation through more accurate temperature maintenance

during controlling process and limits overload conditions. In addition

to the exact and stable room temperature, the advantage of this

system is the minimization of energy consumption and significant

savings. RT520 offers 3 types of TPI control: 1. for radiator (6CPH); 2.

for underfloor heating (3CPH); 3. for electric heating (9CPH).

Optimum Stop calculates how

long the house will take to cool

down, then turns off the boiler at

the earliest possible moment, this

means the system is not running

when it’s not actually necessary. If

there is a sudden heat loss during

this period, then Optimum Stop will

be overridden to regain comfort

conditions.

Landlord settings is a pin code protected feature that allows the landlord to set a service reminder on the

thermostat that will warn the tenant when the boiler is due its annual service.

Span is the difference between the measured temperature and the set temperature.

The schedule has 6 time intervals for which dierent temperatures can be adjusted. You can set 2,

3 or up to 6 temperatures per day. You must dene all time periods. Here is an example of setting a

certain time with a certain temperature.

If you do not want to use the 6 temperature intervals / day (ex: 1 eco, 2 comfort), please see below

how to delete one or more intervals.

If you are using the RT520RF pack, the pairing between the thermostat and the receiver is already

done. During the pairing process, please make sure the thermostat and the receiver are at least 1

meter from each other.

If you bought the RT520TX and RXRT520 separately or if you want to re-pair thermostat with the

receiver, make sure that the device is disconnected from the power supply and the switches on the

receiver have been set to AUTO and ON. Then connect the receiver to the power supply and wait for

the red LED to light steadily. Then switch to the OFF position and again to ON position quickly. The red

ashing LED will conrm entering the pairing mode.

Once devices are successfully

paired, LED on the receiver

will go solid red.

After all, thermostat will go back

to the main screen.

The device will be reset and will

start up automatically.

To reset the thermostat, press MENU,

DOWN and BOOST simultaneously

for 5 seconds.

Repeat the process for all time periods.

Once service mode has become active, the device will lock the set point temperature as set

by the installer/landlord. To unlock this device, the landlord needs to be contacted and the

boiler serviced. Landlord settings will not be reset.

Programming - Automatic Mode

RT520TX Thermostat Pairing with the Receiver

Landlord Settings

Factory Reset

Test the Pairing Process

AUT O

OF F

MANUAL

AUT O

OF F

MANUAL

Standard Power Up and Conguration

Please follow steps 1 to 17 from section .OpenTherm Power Up and Configuration

NOTE: Using UP or DOWN, you can choose either TPI (step 2) or SPAN (step 6). Choosing one

option excludes the other.

910A 10B

Press SELECT.Press SELECT.

Optimum Start is a selectable function which, depending on the ambient room temperature, will start the boiler

operation at the optimum time to achieve the set-point temperature. It saves energy by only firing the boiler

for the minimum required time.

64 5

Using UP or DOWN, select PAIR

and press SELECT.

Press MENU. Using UP or DOWN, navigate to

Pairing submenu and press SELECT.

1 2 3

This is an example for your weekly

schedule. High temperature should

be used for the ON times and low

temperature for the OFF times.

TIME: 6 temp / day

- eco -

2 temp / day

- comfort -

06.00 21 °C 21 °C

10.00 14 °C -

12.00 21 °C -

14.00 14 °C -

18.00 21 °C -

21.00 14 °C 14 °C

Product specificaties

Merk:	Salus
Categorie:	Thermostaat
Model:	RT 520 TX

Heb je hulp nodig?

Als je hulp nodig hebt met Salus RT 520 TX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermostaat Salus

Salus SQ610BRF Handleiding

8 Augustus 2024

Salus IT800 WIFI Handleiding

9 Juli 2024

Salus PH60-1 Handleiding

24 April 2023

Salus HTRS 230 Handleiding

24 April 2023

Salus ST320 Handleiding

24 April 2023

Salus RT300 Funk Handleiding

24 April 2023

Salus RT520RF Handleiding

24 April 2023

Salus RT500 Handleiding

24 April 2023

Salus EP210 Handleiding

24 April 2023

Salus RT510RF Handleiding

24 April 2023

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Techno Line TM 3010 Handleiding

18 November 2024

Ferguson FS1TH Handleiding

17 November 2024

EQ-3 HM-RC-19 Handleiding

16 November 2024

EQ-3 CC-RT-N Handleiding

16 November 2024

Delta Dore TYDOM 1.0 Handleiding

16 November 2024

Delta Dore Tybox 5701 FP Handleiding

16 November 2024

Delta Dore Tybox 33 Handleiding

16 November 2024

Delta Dore Tybox 5702 FP Handleiding

16 November 2024

Delta Dore Tybox 31 Handleiding

16 November 2024

Delta Dore TYBOX 827 W RF Handleiding

16 November 2024