Salter 9192 BK3R Handleiding

Salter Weegschaal 9192 BK3R

Lees hieronder de 📖 handleiding in het Nederlandse voor Salter 9192 BK3R (2 pagina's) in de categorie Weegschaal. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
9192
GB
MiBODY Salter MiBody is a range of connected devices to make weight and health
management easier. Measurements are sent wireless to your mobile device and can
be viewed using the free to download MiBody App. Trends can be tracked over time
and the measurements explained with healthy/recommended ranges. The results are
stored on your personal mobile device and are private unless you choose to share
your achievements.
MiBody should be used in addition with and not as a substitute to professional
medical guidance. If you are concerned about any aspect of your health please seek
professional medical guidance.
HOW DOES THIS SALTER SCALE WORK? This Salter scale uses BIA (Bio Impedance
Analysis) technology which passes a tiny electrical impulse through the body to
determine fat from lean tissue, the electrical impulse cannot be felt and is perfectly
safe. Contact with the body is made via a conductive film on the platform of the scale.
This method simultaneously calculates your personal weight, body fat, total body
water, BMI, Basal Metabolic Rate, bone mass and muscle mass, giving you a more
accurate reading of your overall health and fitness. This scale stores the personal
data of up to 8 users. As well as being an analyser scale, this scale can be used as a
conventional scale.
PREPARING YOUR SCALE 1. Open the battery compartment on the scale underside.
2. Remove isolating tab from beneath the battery (if fitted) or insert batteries
observing the polarity signs (+ and -) inside the battery compartment. Close 3.
the battery compartment. Select kg, st or lb weight mode by the switch on the 4.
underside of the scale. For use on carpet remove the non-slip pads from the 5.
scales feet and attach enclosed carpet feet. Position scale on a firm flat surface.6.
MiBODY APP Before using your device for the first time: Download and install 1.
the Salter MiBody App from the App store. Use keyword search terms “Salter” or
“MiBody”. Turn Bluetooth “On” in the “Settings” menu of your mobile device.2.
3. Open the MiBody App and follow the on screen instructions to set up your user
account.
PAIRING DEVICES
1. Turn Bluetooth “On” in the “Settings” menu of your mobile device.
2. Open the MiBody App.
3. Press the button.
4. Press “Add Device”.
5. Press the scale to turn on the scale.
6. The App should automatically find the scale. If not, just press the “ ” to find the
scale.
7. Once found, Select the user number you wish to pair. Touch the button to finish.OK
8. If pairing is successful, the user number will flash and cycle through the user
details on the scale.
9. If pairing is unsuccessful will be displayed.
10. The scale will automatically switch o.
11. Repeat procedure for each user and each mobile device.
Note: Each user number can only be paired with one mobile device. Results will be
sent to the paired device only.
INITIALISING YOUR SCALE 1. Press the platform centre and remove your foot.
2. 0.0 ‘ ’ will be displayed. The scale will switch o and is now ready for use.3.
This initialisation process must be repeated if the scale is moved.
At all other times step straight on the scale.
WEIGHT READING ONLY This scale features our convenient step-on operation. Once
initialised the scale can be operated by simply stepping straight on the platform – no
more waiting! Step on and stand very still while the scale computes your weight.1.
2. Your weight is displayed. Step o. Your weight will be displayed for a few 3.
seconds. The scale will switch o.4.
PERSONAL DATA ENTRY
1. Press the platform centre and remove your foot.
2. Press the button.
3. While the user number is flashing, select a user number by pressing the or
buttons. Press the button to confirm your selection.
4. The height display will flash.
Press or as necessary to set your height, then press the button.
5. The age display will flash.
Press or as necessary to set your age, then press the button.
6. The male or female symbol will flash. Press or to select male/female/male
athlete/female athlete, then press the button.
Athlete Mode:
An athlete is defined as a person who is involved in intense physical activity
of approximately 12 hours per week and who has a resting heart rate of
approximately 60 beats per minute or less.
7. The display will show your settings, then switch o. The memory is set.
8. Repeat procedure for a second user, or to change user details.
Note: To update or overwrite the memorised data, follow the same procedure,
making changes as required.
WEIGHT & BODY FAT READINGS
1. Position scale on a firm flat surface.
2. Press the platform centre and remove your foot.
3. Press the button.
4. Whilst the user number is flashing select your user number by pressing the
or buttons.
5. Wait while the display reconfirms your personal data then shows a zero reading.
6. When zero is displayed, with bare feet, step onto the platform and stand still.
IMPÉDAN CEMÈTRE • KÖRPER-ANALYSE-WAAGE • BÁSCULA ANALIZADORA DEL CUERPO • PESAPERSONE RILEVA-GRASSO
BALANÇA DE ANÁLISE CORPORAL • KROPPSANALYSEVEKT • LICHAAMSANALYSE WEEGSCHAAL
KEHON KOOSTUMUKSEN ANALYYSIVAAKA • KROPPSANALYSVÅG • KROPSANALYSEVÆGT • TESTZSÍRANALIZÁTOROS MÉRLEG
VÁHA PRO ANALÝZU TĚLA • VÜCUT ANALİZ TARTISI • ΖΥΓΑΡΙΑ ΜΕ ΑΝΑΛΥΤΗ ΣΩΜΑΤΟΣ • ВЕСЫ-АНАЛИЗАТОР
WAGA BODY ANALYSER • OSOBNÁ VÁHA S ANALYZÁTOROM
BODY ANALYSER SCALE
Instructions and Guarantee
E
7. Your weight, body fat % total body water % and BMR are displayed followed by
your muscle mass, bone mass and BMI.
8. If the user number is paired with a mobile device will be displayed and the
data will be sent wirelessly to your mobile device.
9. If the device is out of range or the App is closed will be displayed and the data
will be saved on the scale and transferred next time the scale is used.
10. The scale will switch o.

Product specificaties

Merk: Salter
Categorie: Weegschaal
Model: 9192 BK3R

Heb je hulp nodig?

Als je hulp nodig hebt met Salter 9192 BK3R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Weegschaal Salter

Salter

Salter 9221 BK3R Handleiding

27 Augustus 2024
Salter

Salter 9113 GY3R Handleiding

27 Augustus 2024
Salter

Salter 9192 BK3R Handleiding

27 Augustus 2024
Salter

Salter 9113 SV3R Handleiding

27 Augustus 2024
Salter

Salter SA 9193 GN3R Handleiding

9 Juli 2023
Salter

Salter SA 9216 WD3R Handleiding

8 Juli 2023
Salter

Salter 9500 Handleiding

6 Juli 2023
Salter

Salter BAMBOU Handleiding

3 Juli 2023
Salter

Salter 9206 SVWH3R Handleiding

1 Juli 2023
Salter

Salter WH3R Analyser 9174 Handleiding

26 Juni 2023

Handleiding Weegschaal

Nieuwste handleidingen voor Weegschaal

Medel

Medel Diagnostic XXL Handleiding

18 November 2024
PCE Instruments

PCE Instruments PCE-CS 1T Handleiding

17 November 2024
Cardinal Detecto

Cardinal Detecto Sonaris Handleiding

17 November 2024
Kern

Kern MGC 100K-1 Handleiding

16 November 2024
Sencor

Sencor SBS 2507WH Handleiding

16 November 2024
Soehnle

Soehnle Style Sense Multi 300 Handleiding

16 November 2024
Ecomed

Ecomed PS-72E Handleiding

16 November 2024
Adler

Adler AD 8169 Handleiding

15 November 2024
Ade

Ade Nina BM 707 Handleiding

14 November 2024
Perel

Perel VTBAL405 Handleiding

14 November 2024