Sagem AXIUM HDD 45 Handleiding

Sagem LCD TV AXIUM HDD 45

Lees hieronder de 📖 handleiding in het Nederlandse voor Sagem AXIUM HDD 45 (14 pagina's) in de categorie LCD TV. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

ENGLISH

1. Precautions

1.1. Safety

Respect all maintenance advice, safety precautions and instructions recommended in this user booklet

are for your safety and to prolong the working life of the equipment.

• Definitions

Warning concerning user and equipment safety.

Warning about the risk of electric shocks.

Indicates a hot surface.

Warning about the danger of the lamp depreciation

• Safety regulations

This SAGEM AXIUM™ Home Cinema Screen is a class I appliance; it MUST be connected

to an electrical wall socket equipped with an earth.

Your SAGEM AXIUM™ Home Cinema Screen is designed to function:

– with a 220-240 V~, 50-60 Hz, AC (alternating current) network;

– at an ambient temperature between +5°C and +35°C;

– in areas with humidity less than 85%.

(For more details, see chapter 16).

To avoid danger of overheating or electrocution:

– avoid direct exposure to sunlight and do not put naked flames or any other heat source

under the appliance;

– do not expose the appliance to water drips or splashes;

– do not place objects filled with liquid, such as flower vases, on the appliance;

– do not expose the appliance to very dusty environments;

– avoid shocks and vibrations.

You are recommended to disconnect the appliance from the power supply and the aerial:

– during thunder storms;

– when not used for long periods of time;

– when the appliance is malfunctioning (see chapter 13).

Before connecting or changing any connections to an audio-video/computer source (DVD

player, PC, etc.), disconnect the power cord from each appliance.

Make sure that ventilation grills are not obstructed by objects such as newspapers, table

cloths, curtains etc.

To avoid electric shocks, do not insert foreign bodies, such as needles or coins into the

ventilation grills.

Leave a gap of at least 10 cm around the appliance to allow sufficient ventilation.

Before disconnecting the power lead, you are recommended to let the cooling fans of your

SAGEM AXIUM™ Home Cinema Screen work for a few minutes. This will increase its working

life.

TABLE OF CONTENTS

1. Precautions 2

1.1. Safety 2

1.2. Maintenance 3

2. Set Up 4

2.1. Fitting the speaker columns (optional) 4

2.2. Aerial connection 4

2.3. Mains connection 5

2.4. Switch on 5

2.5. Switching off your SAGEM AXIUM™ Home Cinema Screen 5

3. First Rapid Installation 6

4. Description of the buttons and indicator lights 6

4.1. Buttons the right side door 6

4.2. Front panel indicator lights and remote control receiver 7

5. Remote Control 7

6. Personalised settings 8

6.1. Changing the security code 8

6.2. Return to initial configuration 8

6.3. Searching TV programmes 8

6.3.1. Choice of country 8

6.3.2. Manual installation 9

6.3.3. Automatic installation 9

6.3.4. Modifying the programme list 9

6.4. Choose the MENU language 10

6.5. Setting for the economy mode 10

6.6. Setting for the SPDIF output 10

6.7. Adjusting the headphones output 11

6.8. Setting the speaker mode 11

6.9. Adjusting the Hi-Fi output 11

6.10. Exit stanby mode tuning 11

7. Connecting equipment and configurations 12

7.1. Connection advice 12

7.2. Source configuration 13

7.3. Configuration of computer sources 14

8. Day-to-day use 14

8.1. Picture adjustment 14

8.2. Sound adjustment 15

8.3. Sleep timer 16

8.4. Choice of sources 16

8.5. Choice of format 16

8.6. Programme information 17

8.7. Double picture mode selection 17

8.8. Choosing a TV programme 17

8.9. Picture hold 17

9. Teletext 18

10. NexTView EPG 19

10.1. Installation 19

10.2. Navigation 19

11. Compatibility with High Definition Television 20

12. HDCP 20

13. Diagnosing Trouble Shooting 21

14. Changing the lamp unit 22

15. Index 23

16. Technical characteristics 24

16.1. Overall view 25

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 1

2. Set Up

2.1. Fitting the speaker columns (optional)

Take the speaker columns out of their packaging. Put the first speaker column beside the screen making the fixing

holes coincide with those of the frame. Using the screw supplied and a screwdriver, fix the two lugs of the column

against the frame. Do the same for the second speaker column.

Connect each column to your SAGEM AXIUM™ Home Cinema Screen with the audio cables supplied. To hide

the cables, start from the black and red terminals on the back of the column pushing the wires into the groove.

Then continue like this up to the terminals of the television set. Do the same for the second speaker column.

You have the possibility of connecting your own speakers to your SAGEM AXIUM™ Home Cinema Screen if these

have impedance greater than or equal to 8 ohms. To do this, disconnect the speaker columns, connect your

speakers instead, pass the wires in the grooves provided and deactivate the subwoofer (see §8.2).

2.2. Aerial connection

Insert the end of the coaxial cable leading from your aerial into the aerial input socket at the back of your SAGEM

AXIUM™ Home Cinema Screen.

Your SAGEM AXIUM™ Home Cinema Screen is fitted with 2 tuners, but only one cable is needed to supply both.

AV3

AV2

AV1

SPDIF

AV4AV5

PC2 IN

ANT

HI-FI

OUT

DVI-D

INTERLACED

PROGRESSIVE

SERVICE

1.2. Maintenance

•Before doing anything, disconnect the mains lead from the wall socket.

• Clean the cabinet using a soft, slightly damp cloth and a non-abrasive and non-wax detergent.

• Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution.

• Never use benzene, alcohol or petroleum-based cleaning products as these could damage the finish and the

screen.

Your SAGEM AXIUM™ Home Cinema Screen utilises high voltage. Never attempt to access

the interior of the apparatus, except when you are changing the lamp unit.

Do not open or dismantle this product as this will expose you to the risk of electrocution.

This appliance will auto-detect the end of the lamp's working life. Replace the lamp as soon as

the bulb indicator lights up on the front panel.

When the SAGEM AXIUM™ Home Cinema Screen lamp reaches the end of its working life,

there could be a loud, sharp sound when it stops working. The appliance will only work when

you replace the bulb.

To avoid burns or the lamp unit damage whilst it is being replaced, you must disconnect the

mains lead from the wall socket.

Wait at least one hour before starting to change the lamp unit.

Make sure that you follow the whole replacement procedure described in "Changing

the lamp unit" on page 22.

Only use suitable batteries that comply with the maker's specifications (see chapter 16).

– the batteries supplied are not rechargeable;

– pay particular attention to environmental matters;

– take the defective or used batteries to the places provided for this effect in accordance with

current regulations; never throw them in the dustbin.

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 3

ENGLISH

3. First Rapid Installation

Your SAGEM AXIUM™ Home Cinema Screen is not preset to receive the wireless channels for your region.

This rapid installation is automatically offered when you set up the appliance. It allows you to configure the basic

elements of your product (menu languages, country, and channel reception).

You can return to these settings at any time (see chapter 6).

Select the menu language using the buttons , validate using the OK

key.

Select the country where you are by using the buttons then validate

with the OK button.

COUNTRY

PORTUGAL

GREECE

FRANCE

GERMANY

AUSTRIA

ITALY

SPAIN

OSD LANGUAGE

ENGLISH

ELLHNIKA

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

NEDERLANDS

PORTUGUES

and

Country Colour System Stereo

France SECAM L Nicam L

Germany PAL B, G Two B/G carriers

Austria PAL B, G Two B/G carriers

Italy PAL B, G Two B/G carriers

Spain PAL B, G Nicam B/G

Netherlands PAL B, G Two B/G carriers

Denmark PAL B, G Nicam B/G

Sweden PAL B, G Nicam B/G

Norway PAL B, G Nicam B/G

Finland PAL B, G Nicam B/G

Belgium PAL B, H Nicam B/G

Switzerland PAL B, G Two B/G carriers

UK PAL INicam I

Portugal PAL B, G

Greece PAL, SECAM B, G

After accepting with the OK button, the automatic search begins and the channels

are identified and saved automatically. The most current channels are

automatically put in order according to the country that you chose.

You can also interrupt the search at any time by pressing the MENU button.

4. Description of the buttons and indicator lights

4.1. Buttons the right side door

AUTO TUNING

Searching

237

Channels found :

Frequency :

MENU key to stop searching

Validation button (in menus).

Programme change button.

P-

V-

P+

V+

STBY

When the menu is called up, the buttons are used for moving within the screens.

On/off button.

Buttons for adjusting the volume.

and

and,,

2.3. Mains connection

Insert the mains plug into a 220-240V~ 50-60H zelectrical wall socket.

2.4. Switch on

2.5. Switching off your SAGEM AXIUM™Home Cinema Screen

To put your SAGEM AXIUM™ Home Cinema Screen into standby, press the standby button on the remote control

or the standby button on the right side door.

You can cancel standby mode within 5 seconds (indicator light flashes green) by pressing the standby button

again on the remote control or the right side door. After this time, standby mode cannot be stopped.

During the standby phase (approximately 1 minute), the indicator light on the front panel starts flashing orange.

The state of real standby is only effective when this indicator light changes to red.

In order to prolong the lamp's working life, do not interrupt the standby procedure,

NEVER switch off your appliance using the mains switch or disconnect the wall plug

unless the front panel LED is red.

If you want to switch on your television set again, wait at least 10 seconds before pres-

sing the switch on the left.

Switch the appliance on by pressing the ON/OFF switch on the left of your appliance

(See § 16.1).

Setting up your remote control:

Open the battery compartment cover and insert the two R6-1.5V type batteries.

Make sure that the batteries are installed correctly.

Do not use batteries of different types or rechargeable batteries.

Switching on your SAGEM AXIUM™ Home Cinema Screen:

Press the standby button on the remote control or right side door.

NB: The on/off indicator light located on the front panel of your SAGEM AXIUM™ Home Cinema Screen

flashes orange whilst the lamp is warming up, then goes out when the lamp is functioning.

When you set up your SAGEM AXIUM™ Home Cinema Screen for the first time, you can take advantage of a

rapid installation procedure after this warm-up phase (see chapter 3).

Connecting other audio/video or computer appliances is covered in chapter 7. Before looking at this, proceed to

the rapid installation.

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 5

Product specificaties

Merk:	Sagem
Categorie:	LCD TV
Model:	AXIUM HDD 45

Heb je hulp nodig?

Als je hulp nodig hebt met Sagem AXIUM HDD 45 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding LCD TV Sagem

Sagem AXIUM HDD 45 Handleiding

4 Mei 2023

Handleiding LCD TV

Nieuwste handleidingen voor LCD TV

Prosonic PBT-26003 Handleiding

14 Oktober 2023

Telefunken L22F135A3V2 Handleiding

27 September 2023

Telefunken A22F232A Handleiding

27 September 2023

Difrnce LTV-2453 Handleiding

29 September 2023

Telefunken A40F435A Handleiding

27 September 2023

Telefunken B22F340A Handleiding

27 September 2023

Telefunken D32F472M4 Handleiding

27 September 2023

Telefunken D50V800M4CWH Handleiding

27 September 2023

Telefunken D32F470R4CW Handleiding

27 September 2023

Sanyo CE32LD08-B Handleiding

22 September 2023