Ryobi RY30564 Handleiding

Ryobi Grastrimmer RY30564

Lees hieronder de 📖 handleiding in het Nederlandse voor Ryobi RY30564 (26 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/26
Your new trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before
using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Thank you for your purchase.
OPERATOR’S MANUAL
30cc String Trimmers and Brushcutter
BC30
RY30564
SS30
RY30544
CS30
RY30524
2
Introduction ..................................................................................................................................................................... 2
� General Safety Rules ....................................................................................................................................................... 3
� Specific Safety Rules ...................................................................................................................................................... 4
� Symbols .......................................................................................................................................................................5-6
�� Features .......................................................................................................................................................................7-9
� Assembly .................................................................................................................................................................... 9-14
� Operation .................................................................................................................................................................. 14-18
� Maintenance ...........................................................................................................................................................19-21
� Troubleshooting ........................................................................................................................................................22-23
� Warranty ...................................................................................................................................................................23-25
� Service Parts ....................................................................................................................................................Back Page
TABLE OF CONTENTS
INTRODUCTION
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product making it easy to maintain and operate.
MAKE THE MOST OF YOUR PURCHASE!
Go to www.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the Ryobi Help Line!
CALL
1-800-860-4050
www.ryobitools.com
To register your Ryobi product or set up your eBox™ account by regular mail, please print the following informa-
tion on a 3 in. x 5 in. card or standard postcard: your name, mailing address, phone numbers, email address,
Ryobi product(s) purchased with item number from package, and serial number for each product. Mail the card
to: Techtronic Industries North America, Inc., Attn. Ryobi Registration, 1428 Pearman Dairy Road, Anderson,
SC 29625.To receive information on our company and products, please include the following statement on your
registration card: “Send me information on your products and company using the contact information I am pro-
viding with this product registration.”
3
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious personal injury.
READ ALL INSTRUCTIONS
For safe operation, read and understand all instructions
before using this product. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.
Do not allow children or untrained individuals to use this
unit.
Never start or run the engine in a closed or poorly venti-
lated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or string which
can be thrown or become entangled in the cutting line
or blade.
Wear safety glasses or goggles that are marked to comply
with ANSI Z87.1 standard when operating this product.
Wear heavy, long pants, boots, and gloves. Do not wear
loose fitting clothing, short pants, sandals, or go barefoot.
Do not wear jewelry of any kind.
Product users on United States Forest Service land,
and in some states, must comply with fire prevention
regulations. This product is equipped with a spark arrestor;
however, other user requirements may apply. Check with
your federal, state, or local authorities.
Never operate this unit on the operator’s left side.
� Secure long hair above shoulder level to prevent
entanglement in moving parts.
� Keep all bystanders, children, and pets at least
50 ft. away. Bystanders should be encouraged to wear
eye protection.
� Do not operate this unit when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
� Do not operate in poor lighting.
� Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces.
� Keep all parts of your body away from any moving
part.
� To avoid hot surfaces, never operate the unit with the
bottom of the engine above waist level.
� Do not touch area around the muffler or cylinder of the
unit, these parts get hot from operation.
Always stop the engine and remove the spark plug wire
before making any adjustments or repairs except for
carburetor adjustments. Wear your protective equipment
and observe all safety instructions. When the unit is turned
off, make sure the cutting attachment has stopped before
setting the unit down.
Inspect the unit before each use for loose fasteners, fuel
leaks, etc. Replace any damaged parts before use.
The string head or blade will rotate during carburetor
adjustments.
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
numbness, and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these
symptoms. It is presently unknown what, if any, vibrations
or extent of exposure may contribute to the condition.
There are measures that can be taken by the operator to
possibly reduce the effects of vibration:
a) Keep your body warm in cold weather. When oper-
ating the unit wear gloves to keep hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
b) After each period of operation, exercise to increase
blood circulation.
c) Take frequent work breaks. Limit the amount of
exposure per day.
d) Keep the tool well maintained, fasteners tightened,
and worn parts replaced.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician about
these symptoms.
Mix and store fuel in a container approved for gasoline.
� Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 30 ft. away from refueling
site before starting engine. Slowly remove the fuel cap
after stopping engine. Do not smoke when refueling.
Stop the engine and allow to cool before refueling or
storing the unit.
Allow the engine to cool; empty the fuel tank and secure
the unit from moving before transporting in a vehicle.

Product specificaties

Merk: Ryobi
Categorie: Grastrimmer
Model: RY30564

Heb je hulp nodig?

Als je hulp nodig hebt met Ryobi RY30564 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Grastrimmer Ryobi

Ryobi

Ryobi One+ P20220 Handleiding

23 September 2024
Ryobi

Ryobi RBC36X26E Handleiding

30 April 2023
Ryobi

Ryobi RBC430SBS Handleiding

6 April 2023
Ryobi

Ryobi RLT5027 Handleiding

27 Maart 2023
Ryobi

Ryobi RLT183220 Handleiding

27 Maart 2023
Ryobi

Ryobi RLT3123 Handleiding

26 Maart 2023
Ryobi

Ryobi One+ RLT1831H20F Handleiding

25 Maart 2023
Ryobi

Ryobi RLT1832133H Handleiding

23 Maart 2023
Ryobi

Ryobi RLT430CESD Handleiding

15 Maart 2023
Ryobi

Ryobi RLT5030S Handleiding

13 Maart 2023

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Makita

Makita BCM3300 Handleiding

28 Maart 2025
Makita

Makita BCM2310 Handleiding

28 Maart 2025
Makita

Makita BCM2600 Handleiding

28 Maart 2025
Makita

Makita BCM4300 Handleiding

28 Maart 2025
Einhell

Einhell RG-CG 7,2 Li Handleiding

26 Maart 2025
Flymo

Flymo 18V SimpliTrim 250 Handleiding

10 Maart 2025
Flymo

Flymo 18V SimpliTrim 250 KIT 2.0 Handleiding

10 Maart 2025
Remington

Remington MB905AU Handleiding

4 Maart 2025
Remington

Remington ONE Head & Body PG760 Handleiding

4 Maart 2025
BaByliss

BaByliss Super-X Metal Series MT991E Handleiding

26 Februari 2025