Ryobi RPW2500WB Handleiding
Ryobi
Hogedruk reiniger
RPW2500WB
Lees hieronder de 📖 handleiding in het Nederlandse voor Ryobi RPW2500WB (25 pagina's) in de categorie Hogedruk reiniger. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/25
OPERATOR’S MANUAL
3-N-1 HI-SPEED GASOLINE
PRESSURE WASHER
RPW2500WB
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL 1
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
3-N-1 HI-SPEED GASOLINE PRESSURE WASHER USER’S MANUAL
F
GB
D
E
I
P
NL
CZ
RU
RO
PL
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
DANGER: You WILL be KILLED or SERIOUSLY HURT if you do not follow the instructions in this operator’s
manual.
Thank you for your purchase.
2
Introduction .......................................................................................................................................................................2
Important Safety Instructions ............................................................................................................................................3
Specific Safety Rules.........................................................................................................................................................4
Symbols .........................................................................................................................................................................5-6
Features ......................................................................................................................................................................... 7-8
Assembly ..................................................................................................................................................................... 8-14
Operation ...................................................................................................................................................................15-19
Maintenance ..............................................................................................................................................................20-22
Troubleshooting ...............................................................................................................................................................23
Warranty ..........................................................................................................................................................................24
Parts Ordering / Service .................................................................................................................................... Back Page
TABLE OF CONTENTS
INTRODUCTION
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product making it easy to maintain and operate.
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock,
fire and/or carbon monoxide poisoning which will cause
death or serious personal injury.
READ ALL INSTRUCTIONS
Know your tool. Read the operator’s manual carefully.
Learn the machine’s applications and limitations as well
as the specific potential hazards related to this tool.
Keep guards in place and in working order. Never oper-
ate the tool with any guard or cover removed. Make sure
all guards are operating properly before each use.
Remove adjusting keys and wrenches. Form habit of
checking to see that keys and adjusting wrenches are
removed from tool before turning it on.
To reduce the risk of injury, keep children and visitors
away. All visitors should wear safety glasses and be kept
a safe distance from work area.
Keep the area of operation clear of all persons,
particularly small children, and pets.
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
Carbon monoxide, a colorless, odorless, and extremely
dangerous gas, can cause unconsciousness or death.
Use right tool. Don’t force tool or attachment to do a
job it was not designed for. Don’t use it for a purpose not
intended.
Dress properly. Do not wear loose clothing, gloves,
neckties, or jewelry. They can get caught and draw you
into moving parts. Rubber gloves and nonskid footwear
are recommended when working outdoors. Also wear
protective hair covering to contain long hair.
Do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces.
Exercise caution to avoid slipping or falling.
Always wear safety glasses with side shields. Everyday
eyeglasses have only impact-resistant lenses; they are
NOT safety glasses.
Don’t overreach or stand on unstable support. Keep
proper footing and balance at all times.
Use only recommended accessories. The use of
improper accessories may cause risk of injury.
Follow the maintenance instructions specified in this
manual.
This equipment shall not be used at night or under
bad lighting conditions.
Check damaged parts. Before further use of the
tool, a
guard or other part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting, and any other conditions that may affect its
operation. A guard or other part that is damaged must
be properly repaired or replaced by an authorized service
center to avoid risk of personal injury.
Never leave tool running unattended. Turn power off.
Don’t leave tool until it comes to a complete stop.
Keep the engine free of grass, leaves, or grease to
reduce the chance of a fire hazard.
Keep the exhaust pipe free of foreign objects.
Follow manufacturer’s recommendations for safe
loading, unloading, transport, and storage of
machine.
Be thoroughly familiar with controls. Know how to stop
the product and bleed pressure quickly.
Keep tool dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use
brake fluids, gasoline, petroleum-based products, or any
solvents to clean tool.
Stay alert and exercise control. Watch what you are
doing and use common sense. Do not operate tool when
you are tired. Do not rush.
Do not operate the product while under the influence
of drugs, alcohol, or any medication.
Check the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or string
which can be thrown or become entangled in the
machine.
Do not use tool if switch does not turn it off. Have
defective switches replaced by an authorized service
center.
Before cleaning, repairing, or inspecting, shut off the
engine and make certain all moving parts have stopped.
Disconnect the spark plug wire, and keep the wire away
from the plug to prevent accidental starting.
Avoid dangerous environment. Don’t use in damp or
wet locations or expose to rain. Keep work area well lit.
Never use in an explosive atmosphere. Normal sparking
of the motor could ignite fumes.
Do not operate while smoking or near an open
flame.
Do not operate around dry brush, twigs, cloth rags, or
other flammable materials.
WARNING: Risk of injection or injury – Do not direct
discharge stream at persons.
Do not use the surface cleaner on a non-horizontal
surface. Always ensure machine is on a level surface
while pressure washing.
Product specificaties
| Merk: | Ryobi |
| Categorie: | Hogedruk reiniger |
| Model: | RPW2500WB |
Heb je hulp nodig?
Als je hulp nodig hebt met Ryobi RPW2500WB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hogedruk reiniger Ryobi
12 Maart 2023
12 Maart 2023
12 Maart 2023
12 Maart 2023
12 Maart 2023
12 Maart 2023
Handleiding Hogedruk reiniger
- Hogedruk reiniger Bosch
- Hogedruk reiniger Karcher
- Hogedruk reiniger Alto
- Hogedruk reiniger Batavia
- Hogedruk reiniger Bruder Mannesmann
- Hogedruk reiniger Dampcomat
- Hogedruk reiniger Defort
- Hogedruk reiniger Einhell
- Hogedruk reiniger Elektra Beckum
- Hogedruk reiniger Eurom
- Hogedruk reiniger Ferrex
- Hogedruk reiniger Fuxtec
- Hogedruk reiniger Gamma
- Hogedruk reiniger Gardena
- Hogedruk reiniger Gardenline
- Hogedruk reiniger Gude
- Hogedruk reiniger Hitachi
- Hogedruk reiniger Karomat
- Hogedruk reiniger Kent
- Hogedruk reiniger Kibani
- Hogedruk reiniger Kingcraft
- Hogedruk reiniger Kranzle
- Hogedruk reiniger Lavorwash
- Hogedruk reiniger Levita
- Hogedruk reiniger Lux Tools
- Hogedruk reiniger Mr Gardener
- Hogedruk reiniger Nilfisk
- Hogedruk reiniger Nilfisk-ALTO
- Hogedruk reiniger Polti
- Hogedruk reiniger Skil
- Hogedruk reiniger Stiga
- Hogedruk reiniger Stihl
- Hogedruk reiniger Toledo
- Hogedruk reiniger Topcraft
- Hogedruk reiniger Varo
- Hogedruk reiniger VAX
- Hogedruk reiniger Vonroc
- Hogedruk reiniger Waterzoom
- Hogedruk reiniger Workzone
- Hogedruk reiniger Worx
- Hogedruk reiniger Yardforce
- Hogedruk reiniger Yellow Profiline
- Hogedruk reiniger P1PE
- Hogedruk reiniger Mac Allister
- Hogedruk reiniger Toolson
- Hogedruk reiniger AR Blue Clean
- Hogedruk reiniger QLT
Nieuwste handleidingen voor Hogedruk reiniger
5 Oktober 2024
15 Februari 2025
27 Januari 2025
5 Oktober 2024
29 Juni 2024
3 Juni 2024
3 Juni 2024
3 Juni 2024
11 Mei 2024
11 Mei 2024