Ryobi RLS02 Handleiding

Ryobi Gewicht-training bank RLS02

Lees hieronder de 📖 handleiding in het Nederlandse voor Ryobi RLS02 (40 pagina's) in de categorie Gewicht-training bank. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

RLS02

ORIGINAL INSTRUCTIONS

TRADUCTION DES INSTRUCTIONS ORIGINALES

ÜBERSETZUNG DER ORIGINALANLEITUNG

TRADUCCIÓN DE LAS INSTRUCCIONES ORIGINALES

TRADUZIONE DELLE ISTRUZIONI ORIGINALI

VERTALING VAN DE ORIGINELE INSTRUCTIES

TRADUÇÃO DAS INSTRUÇÕES ORIGINAIS

OVERSÆTTELSE AF DE ORIGINALE INSTRUKTIONER

ÖVERSÄTTNING AV DE URSPRUNGLIGA INSTRUKTIONERNA

ALKUPERÄISTEN OHJEIDEN SUOMENNOS

OVERSETTELSE AV DE ORIGINALE INSTRUKSJONENE

ПЕРЕВОД ОРИГИНАЛЬНЫХ ИНСТРУКЦИЙ

TŁUMACZENIE INSTRUKCJI ORYGINALNEJ

PŘEKLAD ORIGINÁLNÍCH POKYNŮ

AZ EREDETI ÚTMUTATÓ FORDÍTÁSA

TRADUCEREA INSTRUCŢIUNILOR ORIGINALE

TULKOTS NO ORIĢINĀLĀS INSTRUKCIJAS

ORIGINALIŲ INSTRUKCIJŲ VERTIMAS

ORIGINAALJUHENDI TÕLGE

PRIJEVOD ORIGINALNIH UPUTA

PREVOD ORIGINALNIH NAVODIL

PREKLAD ORIGINÁLNYCH POKYNOV

ΜΕΤΆΦΡΑΣΗ ΤΩΝ ΠΡΩΤΌΤΥΠΩΝ ΟΔΗΓΙΏΝ

ORIJINAL TALIMATLARIN TERCÜMESI

English EN

GENERAL SAFETY WARNINGS

WARNING

Safe operation of this accessory requires that you read

and understand this operator’s manual, the operator’s

manual for the table saw and all labels afﬁ xed to the tool.

■Know your accessory. Read the operator’s manual

carefully. Learn its applications and limitations, as

well as the specific potential hazards related to this

accessory.

■Keep the work area clean. Cluttered work areas and

work benches invite accidents.

■Always wear safety glasses with side shields.

Everyday glasses have only impact resistant lenses.

They are NOT safety glasses.

■This stand will accommodate many mitre saws.

However, it should never be used on any mitre saw

or slide mitre saws with a blade diameter larger

than 305mm. Always confirm any mitre saw used is

mounted securely and is stable before plugging in the

mitre saw. Before turning on the saw, perform a dry

run of the cutting operation just to make sure that no

problems will occur when the cut is made.

■This stand is designed to be used on a flat stable

surface. Do not use the stand on an uneven or unstable

surface. Be sure to allow enough room to handle and

properly support the workpiece.

■Follow the tool mounting instructions carefully, and

ensure the tool is fastened securely.

■Maximum weight of the mitre saw and workpiece

together must not exceed 181kg.

■Do not apply an unbalanced load that could cause

the mitre saw stand to tip over.

■Save these instructions. Refer to them frequently and

use them to instruct others who may use this accessory.

If you loan someone this accessory, loan them these

instructions also to prevent misuse of the product and

possible injury.

■This stand is designed for use with mitre saws or

slide mitre saws with a blade diameter not larger

than 305mm.

■If any parts are missing do not operate this tool

until the missing parts are replaced. Failure to do so

could result in possible serious personal injury.

■Do not attempt to modify this tool or create

accessories not recommended for use with this

tool. Any such alteration or modification is misuse

and could result in a hazardous condition leading to

possible serious personal injury.

■Do not connect to power supply until assembly is

complete. Failure to comply could result in accidental

starting and possible serious personal injury.

■To avoid serious personal injury, make sure the

curved front edge of the mounting brackets are

securely seated over the front rail before seating

the other end of the brackets. Failure to do so

could cause you to lose control of the saw mounting

assembly, which could cause serious personal injury.

■The mounting brackets are designed to fit snugly

over the stand rails. With the locking levers in the

lowered (locked) position, you should not be able to

remove the saw and bracket assembly from the rails.

If the mounting brackets will not fit over the rails, or if

the mounting brackets can be removed from the rails

when the levers are locked, remove from the saw and

bracket assembly immediately and tighten the bracket

adjustment screw as described in the Maintenance

section of this manual. Failure to heed this warning may

result in serious personal injury.

■Do not allow familiarity with tools to make you

careless. Remember that a careless fraction of a

second is sufficient to inflict serious injury.

■Do not use any attachments or accessories not

recommended by the manufacturer of this tool. The

use of attachments or accessories not recommended

can result in serious personal injury.

■When servicing, use only identical Ryobi

replacement parts. Use of any other parts may create

a hazard or cause product damage.

■Do not at any time let brake fluids, gasoline,

petroleumbased products, penetrating oils, etc.,

come in contact with plastic parts. Chemicals can

damage, weaken or destroy plastic which may result in

serious personal injury.

SYMBOL

Wear eye protection

Avoid contact with any pinch point

Product specificaties

Merk:	Ryobi
Categorie:	Gewicht-training bank
Model:	RLS02
Kleur van het product:	Black, Green, Silver
Gewicht:	15900 g
Verstelbare voeten:	Ja
Maximale gewichtscapaciteit:	181 kg
Aantal benen/poten:	4 poot/poten
Maximale capaciteit:	2160 mm
Stand materiaal:	Metaal