Ryobi R80XZTR42 Handleiding

Ryobi Grasmaaier R80XZTR42

Lees hieronder de 📖 handleiding in het Nederlandse voor Ryobi R80XZTR42 (48 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
R80XZTR42
2
Original Instructions
IMPORTANT!
It is essential that you read the instructions in this manual
before assembling, operating, and maintaining the
product.
Subject to technical modication.
Safety, performance, and dependability have been given top
priority in the design of your zero-turn mower.
INTENDED USE
The zero-turn mower is intended for outdoor use only.
The product is designed for domestic lawn mowing. The
cutting blade should rotate approximately parallel to the
ground over which it is being wheeled. All four wheels
should touch the ground while mowing.
The product is to be used only in domestic application by
adults who have received adequate training on the hazards
and preventive measures or actions taken while using it.
The user must understand the instructions.
Do not use the product for any other purpose.
GENERAL PRODUCT SAFETY WARNINGS
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) product or battery-operated (cordless)
product.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges, and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges, or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing, and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery, or long hair can
be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with switch is dangerous and must be repaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
3
Original Instructions
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130°C may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk of
fire.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
ZERO-TURN MOWER SAFETY WARNINGS
TRAINING
Always use safety protective devices. Do not use the
product without the side discharge chute in place and
working properly. The mulch cover should be correctly
installed and working properly during mulching operation.
Follow the manufacturer’s instructions for proper
operation and installation of accessories. Use only
accessories approved by the manufacturer. The use of
other accessories may increase the risk of injury.
Never interfere with the intended function of a safety
device or reduce the protection provided by a safety
device. Check the proper operation of the safety devices
regularly.
Never use the product while people, especially children,
or pets are within 15 m because of the danger of objects
being thrown by contact with the blade.
Do not use the product when there is a risk of lightning.
Do not operate the product in poor lighting. The operator
requires a clear view of the work area to identify potential
hazards.
Be familiar with the controls and the correct use of the
product.
Be aware of possible hazards when not using the
product or when changing accessories. Following this
rule reduces the risk of electric shock, fire, or serious
personal injury.
Never carry passengers or children, even when the
blades have stopped. They may fall off and be seriously
injured or interfere with the safe operation of the product.
Children who have been given rides in the past may
suddenly appear in the mowing area for another ride and
be run over or backed over by the product.
Never allow children or people with reduced physical,
sensory, or mental capabilities, or persons who are
unfamiliar with these instructions to operate, clean, or
maintain the product. Local regulations may restrict
the age of the operator. Children should be adequately
supervised to ensure that they do not play with the
product.
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
Keep hands and feet away from the cutting area, which
is located under the mower deck and inside the side
discharge chute. Keep clear of the side discharge chute
opening at all times. Do not reach under the mower deck.
PREPARATION
Wear heavy, long trousers, long sleeves, and sturdy,
anti-slip footwear. Do not wear short trousers, sandals,
or go barefoot. Avoid wearing clothing that is loose-fitting
or that has hanging cords or ties.
Always wear safety glasses with side shields. Use a face
mask if operation is dusty.
Objects struck by the blade can cause severe injuries to
persons. Thoroughly inspect the area where the product
is to be used, and remove all rocks, sticks, metal, wire,
bones, toys, or other foreign objects. Remember, string
or wire may entangle with the blades.


Product specificaties

Merk: Ryobi
Categorie: Grasmaaier
Model: R80XZTR42

Heb je hulp nodig?

Als je hulp nodig hebt met Ryobi R80XZTR42 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grasmaaier Ryobi

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier