Russell Hobbs Stylo 12911-56 Handleiding

Russell Hobbs Waterkoker Stylo 12911-56

Lees hieronder de 📖 handleiding in het Nederlandse voor Russell Hobbs Stylo 12911-56 (48 pagina's) in de categorie Waterkoker. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
instructions 2
Bedienungsanleitung 4
mode d’emploi 6
instructies 8
istruzioni per l’uso 10
instrucciones 12
instruções 14
brugsanvisning 16
bruksanvisning 18
instruksjoner 20
ohjeet 22
инструкции (Русский) 24
pokyny 26
inštrukcie 28
instrukcja 30
uputstva 32
navodila 34
οδηγίες 36
utasítások 38
talimatlar 40
instrucţiuni 42
инструкции ългарски) 44
2
Read the instructions and keep them safe. If you pass the appliance on, pass on the instructions
too. Remove all packaging.
important safeguards
Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult. Use and
store the appliance out of reach of children.
2 Don’t put the kettle, stand, cable, or plug in any liquid; don’t use the kettle in a
bathroom, near water, or outdoors.
3 Don’t touch hot surfaces.
4 Keep the kettle, stand, and cable away from the edges of worktops and out of reach of
children.
5 Put the stand on a stable, level surface.
6 Wind excess cable beneath the stand.
7 Unplug the stand when not in use, before moving and before cleaning.
8 Don’t use the kettle for any purpose other than heating water.
9 Use the kettle only with the stand supplied (and vice versa).
10 This appliance must not be operated by an external timer or remote control system.
11 Don’t operate the appliance if it’s damaged or malfunctions.
12 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
filling
1 Remove the kettle from the stand.
2 Squeeze the lid release button and pull the lid up and back.
3 Fill with at least 2 cups of water, but not above max
4 If you overfill, the kettle may spit boiling water.
5 Close the lid, and press down to lock it.
switching on
6 Plug the stand into the wall socket.
7 Put the kettle on the stand.
8 Move the switch to . The light will come on, and the kettle will heat up.1
3
switching off
9 When the water boils the kettle will switch off and the light will go out.
10 To switch omanually, move the switch to .0
11 Lifting the kettle off the stand will also switch the kettle off.
general
12 To avoid the risk of splashing, pour slowly and don’t over-tilt the kettle.
13 Don’t tilt the kettle backwards, water might get on to the control area. If this happens, let the
kettle dry before use – sit it somewhere warm for 12 hours.
14 When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the steam used
to switch off automatically, which then condenses and escapes via vents under the kettle.
15 You may see some discolouration on the floor of the kettle. Again, don’t worry – its due to
the bonding of the element to the kettle floor.
using with insufficient water
16 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
17 To prevent the kettle cycling on and off, remove the kettle from the stand and let it cool
before replacing it on the stand.
care and maintenance
18 Check that the kettle is switched off – move the switch to .0
19 Unplug the stand from the wall socket, and let the kettle cool down fully before cleaning.
20 Wipe the kettle, inside and out, with a damp cloth
21 Keep all connectors and sockets dry.
descale regularly
22 Descale regularly, (at least monthly. Use a descaler suitable for use in plastic products (most
products have plastic parts). Follow the instructions on the package of descaler.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
cleaning the filter
23 Switch the kettle off, and let it cool.
24 Open the lid.
25 Push the top of the filter down and back, into the kettle, to release the hooks on the top of
the filter from the rectangular holes on either side of the spout.
26 Lift the filter out of the kettle, to disengage the bottom hook from the circular hole at the
bottom of the spout.
27 Rinse the filter under a running tap while brushing with a soft brush.
28 Lower the filter into the kettle, and engage the bottom hook in the circular hole at the
bottom of the spout.
29 Press the top of the filter gently down and towards you, to force the hooks on the top of the
filter into the rectangular holes on either side of the spout.
30 Close the lid.
wheelie bin symbol
To avoid environmental and health problems due to hazardous substances in
electrical and electronic goods, appliances marked with this symbol mustn’t be
disposed of with unsorted municipal waste, but recovered, reused, or recycled.
instructions
drawings
1 hooks
2 filter
3 hook
4 holes (inside spout)
5 lid
6 lid release button
7 handle
8 light
9 switch
1 on
0 off
10 connectors
11 earth contact
12 stand


Product specificaties

Merk: Russell Hobbs
Categorie: Waterkoker
Model: Stylo 12911-56

Heb je hulp nodig?

Als je hulp nodig hebt met Russell Hobbs Stylo 12911-56 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Waterkoker Russell Hobbs

Handleiding Waterkoker

Nieuwste handleidingen voor Waterkoker