Rotel RDV-1040 Handleiding

Rotel DVD speler RDV-1040

Lees hieronder de 📖 handleiding in het Nederlandse voor Rotel RDV-1040 (30 pagina's) in de categorie DVD speler. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/30
RDV-1040
DVD Player
Owner’s Manual
2
RDV-1040 DVD Player
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT. INSERT FULLY.
APPLICABLE FOR USA, CANADA OR WHERE
APPROVED FOR THE USAGE
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU AU FOND.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safety Instructions
WARNING: There are no user serviceable parts inside. Refer all servicing to qualified
service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to
moisture or water. Do not allow foreign objects to get into the enclosure. If the
unit is exposed to moisture, or a foreign object gets into the enclosure, immedi-
ately disconnect the power cord from the wall. Take the unit to a qualified ser-
vice person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component. Keep this manual so
you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the product itself. Fol-
low all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner. Do not use benzene, thinner or
other organic solvents and disinfectants. These may cause deformation or discoloring.
You must allow 15 cm (6 inches) of clearance behind, 3 cm (1.25 inches) to the sides and 5 cm
(2 inches) above the unit. Do not place the unit on a bed, sofa, rug, or similar surface that
could block the ventilation slots. If the component is placed in a bookcase or cabinet, there
must be ventilation of the cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or any other appliance that
produces heat.
The unit must be connected to a power supply only of the type and voltage specified on the
rear panel of the unit.
Connect the component to the power outlet only with the supplied power supply cable or an
exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding
and/or polarization provisions. Do not use extension cords.
Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed
to heat, or damaged in any way. Pay particular attention to the power cord at the plug and
where it exits the back of the unit.
The power cord should be unplugged from the wall outlet if the unit is to be left unused for a
long period of time.
Immediately stop using the component and have it inspected and/or serviced by a qualified
service agency if:
• The power supply cord or plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way
Place the unit on a fixed, level surface strong enough to support its
weight. Do not place it on a moveable cart that could tip over.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment gene rates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to cor-
rect the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct
exposure to beam.
3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player;
leave all servicing to qualified service personnel.
WARNING!
To reduce the risk of electrical shock, fires, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose the unit to rain or moisture.
3. Do not touch the power cord or plug with wet hands.
3RDV-1040 DVD Player
1
2
3
4
5
TV / DVD switch
OPEN/CLOSE button
REPEAT button
Numeric buttons
SUB TITLE button
ANGLE button
TITLE / GROUP button
/ PREVIOUS button
(STOP) / CLEAR button
/ SLOW – button
TOP MENU button
VOLUME – / CURSOR button
CHANNEL – / CURSOR button
CHOICE button
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Infrared output window
DVD POWER button
TV POWER button
RETURN button
DIMMER button
VSS button
+10 / MUTING button
TV/VIDEO / CANCEL button
AUDIO / fs/RATE button
ZOOM button
VFP / PROG SCAN button
/ NEXT button
(PAUSE) button
(PLAY)/ SELECT button
/ SLOW + button
MENU button
CHANNEL + / CURSOR button
VOLUME + / CURSOR button
ON SCREEN button
ENTER button
6
7
8
9
10
11
12
13
14
Figure 1: RR-DV96 Remote Control
1
TV/DVD switch
Switches the RDV-1040 between TV control mode
and the DVD player control mode.
2
OPEN/CLOSE button
Opens and closes the disc tray.
3
Repeat button
Switches the RDV-1040 among “no repeat” mode,
“repeat 1” mode and to “repeat all” mode.
4
Numeric buttons
In DVD/CD mode use these to select a title or track
number, to enter a time for the Time search. In
TV mode they are used to select a TV channel.
5
SUBTITLE button
Used to activate the on-screen subtitle selection
display and to turn the subtitle on or off (for DVD
VIDEO).
6
ANGLE button
Changes camera angles during playback of a DVD
VIDEO disc containing multiple camera angles.
7
TITLE/GROUP button
Displays the title menu of a DVD Video disc on
the TV screen. Group function not used.
8
/PREVIOUS button
Skips back a chapter, title or track. Also used for
the page selection of a menu screen (for DVD
VIDEO/Video CD). Holding down this button dur-
ing playback rapidly scans to earlier scenes.
9
■ (STOP)/CLEAR button
Stops playback. Also used to erase all the pro-
grammed tracks for the program play.
10
/SLOW – button
During playback lets you reverse disc play at 1.5
to 60 times normal speed. When disc play is
paused press to reverse disc play at 1/2 to 1/32
normal speed.
11
TOP MENU button
Press to display a menu to select specific scenes
on a disc.
12
VOLUME /CURSOR – Button
When in TV mode press to reduce volume. When
in DVD mode press to select an item from a menu
or on-screen display, or to change the setting of
an item in the on-screen display.
13
CHANNEL /CURSOR – Button
When in TV mode press to go to a lower chan-
nel. When in DVD mode press to select an item
from a menu or on-screen display, or to change
the setting of an item in the on-screen display.
14
CHOICE button
Displays the DVD set-up menu. Is also used when
selecting parental lock settings
15
Infrared signal output window
Point this toward the remote sensor on the front
panel when pressing buttons.
16
DVD POWER button
17
TV POWER button
Press to turn the RDV-1040 or your TV on or off
(standby).
18
RETURN button
Returns to the previous menu (for SVCD/Video
CD).
19
DIMMER button
Adjusts the brightness or turns off the display.
20
VSS button
Turn on/off the simulated Virtual Surround Sound
system.
21
+10/MUTING button
Used when selecting or programming numbered
tracks or scenes above 10. During disc play press
to mute sound.
22
TV/VIDEO/CANCEL button
Used to switch inputs when controlling the TV. Used
to remove selected items when setting up pro-
grammed track play. ALso used when setting up
the RR-DV96 to control the TV.
23
AUDIO/fs/RATE button
Selects various audio options during disc play. fs/
RATE function is not used.
24
ZOOM button
When viewing video discs allows the image on
the screen to be enlarged from 1.8 to 64 times
normal size.
25
VFP/PROG SCAN button
The VFP function is used to set video play prop-
erties. Progressive Scan function is used to select
interlaced or progressive scan output when the
V ideo Signal Selector switch is set to Remote.
See the Audio/Video Connections section.
26
/NEXT button
Skips forward a chapter, title or track. Holding
down this button during playback advances play-
back rapidly.
27
II (PAUSE) button
Pauses playback.
28
(PLAY)/SELECT button
Starts playback.SELECT function is not used.
29
/SLOW button
During playback lets you advance disc play at 1.5
to 60 times normal speed. When disc play is
paused press to advance disc play at 1/2 to 1/32
normal speed.
30
MENU button
Displays various menus that let you select items
from the disc.
31
CHANNEL +/CURSOR Button
When in TV mode press to go to a higher chan-
nel. When in DVD mode press to select an item
from a menu or on-screen display, or to change
the setting of an item in the on-screen display.
32
VOLUME +/CURSOR Button
When in TV mode press to increase volume. When
in DVD mode press to select an item from a menu
or on-screen display, or to change the setting of
an item in the on-screen display.
33
ON SCREEN Button
Displays various menus on the screen that let you
select control and programing functions.
34
ENTER button
Press to accept various selections such as chan-
nels selected with the numeric buttons or in some
programming steps.

Product specificaties

Merk: Rotel
Categorie: DVD speler
Model: RDV-1040

Heb je hulp nodig?

Als je hulp nodig hebt met Rotel RDV-1040 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding DVD speler Rotel

Rotel

Rotel rdv 985 Handleiding

3 April 2023
Rotel

Rotel RDV-1045 Handleiding

27 April 2023
Rotel

Rotel RDV-1093 Handleiding

25 Maart 2023
Rotel

Rotel RDV-995 Handleiding

21 Maart 2023
Rotel

Rotel RDV-1080 Handleiding

7 Maart 2023
Rotel

Rotel RDV-1040 Handleiding

6 Maart 2023
Rotel

Rotel RDV-1060 Handleiding

3 Maart 2023
Rotel

Rotel RDV-1050 Handleiding

19 Februari 2023

Handleiding DVD speler

Nieuwste handleidingen voor DVD speler

Magnum

Magnum DVD2005 Handleiding

16 November 2024
Magnum

Magnum DVD-VCR3300 Handleiding

16 November 2024
Hyundai

Hyundai PDP 911 U Handleiding

14 November 2024
LG

LG DVD4750 Handleiding

22 Oktober 2024
LG

LG LH-T460TF Handleiding

22 Oktober 2024
LG

LG HT552PH Handleiding

22 Oktober 2024
LG

LG LH-T361SE Handleiding

22 Oktober 2024
LG

LG LH-W5100 Handleiding

22 Oktober 2024
LG

LG LH-T6245 Handleiding

22 Oktober 2024
LG

LG LH-T6547 Handleiding

22 Oktober 2024