Rotel Michi Q5 Handleiding

Rotel CD-spelers/recorder Michi Q5

Lees hieronder de 📖 handleiding in het Nederlandse voor Rotel Michi Q5 (19 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/19
Owner’s Manual
Manuel de l’utilisateur
Bedienungsanleitung
Manual de Instrucciones
Gebruikershandleiding
Manuale di istruzioni
Instruktionsbok
Инструкция пользователя
Michi Q5
Transport DAC
Lecteur DAC
D/A-Wandler
Procesador Digital de Audio
Digitaal-analoogomzetter
Convertitore Digitale/Analogico
Digital-till-analog-omvandlare
ЦАП/транспорт дисков
2Michi Q5 Transport DAC
Michi products are designed to comply with
international directives on the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment and the disposal of Waste
Electrical and Electronic Equipment (WEEE). The
crossed wheelie bin symbol indicates compliance
and that the products must be appropriately
recycled or processed in accordance with these
directives.
Pin Assignments
Balanced Audio (3 pole XLR):
Pin 1: Ground / Screen
Pin 2: In phase / +ve / Hot
Pin 3: Out of phase / -ve / Cold
AC symbol, Alternating current
Direct current
50 cm
50 cm
20 in
20 in
50 cm
20 in
20 in
50 cm
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open
and interlock failed or bypassed. Avoid direct
exposure to beam.
3. CAUTION: Do not open the top cover. There
are no user serviceable parts inside the
player; leave all servicing to qualified service
personnel.
WARNING!
To reduce the risk of electrical shock, fires, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose the unit to rain or moisture.
3. Do not touch the power cord or plug with
wet hands.
3
Notice
The RS232 connection should be handled by authorized persons only.
WARNING: There are no user serviceable parts inside. Refer all servicing
to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit
to moisture or water. Do not expose the unit to dripping or splashing. Do
not place objects filled with liquids, such as vases, on the unit. Do not allow
foreign objects to get into the enclosure. If the unit is exposed to moisture,
or a foreign object gets into the enclosure, immediately disconnect the
power cord from the wall. Take the unit to a qualified service person for
inspection and necessary repairs.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
The apparatus should be used in non tropical climate.
The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on
the apparatus.
Touching uninsulated terminals or wiring may result in an unpleasant
sensation.
You must allow a minimum 50 cm or 20 inches of unobstructed clearance
around the unit.
WARNING:
The rear panel power cord connector is the mains power
disconnect device. The device must be located in an open area that
allows access to the cord connector.
The unit must be connected to a power supply only of the type and voltage
specified on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz)
Connect the component to the power outlet only with the supplied power
supply cable or an exact equivalent. Do not modify the supplied cable. Do
not use extension cords.
The mains plug is the disconnect of the unit. In order to completely
disconnect the unit from the supply mains, remove the main plug from the
Important Safety Instructions
unit and the AC power outlet. This is the only way to completely remove
mains power from the unit.
The batteries in the remote control should not be exposed to excessive
temperature such as sunshine, fire or other heat sources. Batteries should
be recycled or disposed as per state and local guidelines.
WARNING: The master power switch is located on the rear panel. The
unit must allow unobstructed access to the main power switch.
This product shall be connected to a MAINS socket outlet with a protective
earthing connection.
The MAINS plug or an appliance coupler is used as the disconnect
device, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
FCC Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.(TV, radio, etc.)
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for additional
help.
Caution
This device complies with part 15 of the FCC Rules. Operation is subject
to the following to conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
interference in a residential installation. This equipment generates
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause interference to radio or TV
communications. There is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference to
radio or television reception, which can be determined by turning the
equipment off and on, try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the unit and the television tuner.
• Connect the unit to an AC power outlet on a different electrical circuit.
• Consult your authorized Rotel retailer for assistance.

Product specificaties

Merk: Rotel
Categorie: CD-spelers/recorder
Model: Michi Q5

Heb je hulp nodig?

Als je hulp nodig hebt met Rotel Michi Q5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding CD-spelers/recorder Rotel

Rotel

Rotel Michi Q5 Handleiding

3 November 2024
Rotel

Rotel CD11MKII Handleiding

3 Augustus 2023
Rotel

Rotel RCC-955 Handleiding

28 Juni 2023
Rotel

Rotel CD14MKII Handleiding

9 Mei 2023
Rotel

Rotel RCD-06SE Handleiding

1 Mei 2023
Rotel

Rotel RCD-1572 Handleiding

27 April 2023
Rotel

Rotel RCD-951 Handleiding

25 April 2023
Rotel

Rotel RCD-1070 Handleiding

23 April 2023
Rotel

Rotel RCD-991 Handleiding

20 April 2023
Rotel

Rotel RCD-1572MKII Handleiding

5 April 2023

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder

Taga Harmony

Taga Harmony TCD-50 Handleiding

20 November 2024
Marantz

Marantz SA-17S1 Handleiding

15 November 2024
Klipsch

Klipsch PD-10AE Handleiding

13 November 2024
Reflexion

Reflexion PCD520MF Handleiding

29 September 2024
Auna

Auna Reference 802 Handleiding

24 September 2024
Advance

Advance X-CD1000 EVO Handleiding

11 September 2024
Shanling

Shanling EC mini Handleiding

7 Augustus 2024
Shanling

Shanling CD80 Handleiding

7 Augustus 2024
Shanling

Shanling SCD1.3 Handleiding

7 Augustus 2024
Shanling

Shanling ET3 Handleiding

7 Augustus 2024