Roland VR-50HD Handleiding

Roland Niet gecategoriseerd VR-50HD

Lees hieronder de 📖 handleiding in het Nederlandse voor Roland VR-50HD (48 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

Owner’s Manual (this document)

Read this rst. It explains the basic things you need to know in order to

use the VR-50HD.

PDF Manual (download from the Web)

• Reference Manual

This explains all parameters of the VR-50HD. It also describes the settings to

make when operating the unit by remote control.

To obtain the PDF manual

1. Enter the following URL in your computer.

http://proav.roland.com

2. Go to the VR-50HD product page and click the

“Support” tab.

Before using the VR-50HD, ensure that its system program is at the most recent version. For information on available upgrades for the system

program, see the Roland website (http://proav.roland.com).

Default setting of the system frame rate is 59.94 Hz.

When you want to operate in the Frame Rate of 50 Hz, you can set it at the

System screen.

NOTE

Used for instructions intended to alert the

user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic animals

or pets.

Used for instructions intended to alert the

user to the risk of death or severe injury

should the unit be used improperly.

The symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In the

case of the symbol at left, it means that the power-cord

plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or

warnings.The specific meaning of the symbol is

determined by the design contained within the triangle. In

the case of the symbol at left, it is used for general

cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be

carried out (are forbidden). The specific thing that must

not be done is indicated by the design contained within

the circle. In the case of the symbol at left, it means that

the unit must never be disassembled.

About WARNING and CAUTION Notices About the Symbols

ALWAYS OBSERVE THE FOLLOWING

USING THE UNIT SAFELY

WARNING

To completely turn o power to the unit, pull out

the plug from the outlet

Even with the power switch turned

o, this unit is not completely

separated from its main source of

power. When the power needs to

be completely turned o, turn o

the power switch on the unit, then pull out the

plug from the outlet. For this reason, the outlet

into which you choose to connect the power

cord’s plug should be one that is within easy

reach and readily accessible.

Never obstruct the ventilation holes

Doing so might impede safe

operation.

Do not disassemble or modify by yourself

Do not open (or modify in any way)

the unit or its AC adaptor.

WARNING

Do not repair or replace parts by yourself

Do not attempt to repair the unit,

or replace parts within it (except

when this manual provides specic

instructions directing you to do so).

Refer all servicing to your retailer,

the nearest Roland Service Center, or an

authorized Roland distributor, as listed on the

“Information” sheet.

Do not use or store in the following types of

locations

• Subject to temperature extremes

(e.g., direct sunlight in an

enclosed vehicle, near a heating

duct, on top of heat-generating

equipment); or are

• Damp (e.g., baths, washrooms, on

wet oors); or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Humid; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and

shakiness.

Do not place in an unstable location

Make sure you always have the

unit placed so it is level and sure

to remain stable. Never place it on

stands that could wobble, or on

inclined surfaces.

WARNING

Use only the supplied AC adaptor and the correct

voltage

Be sure to use only the AC

adaptor supplied with the unit.

Also, make sure the line voltage

at the installation matches the

input voltage specied on the AC

adaptor’s body. Other AC adaptors may use a

dierent polarity, or be designed for a dierent

voltage, so their use could result in damage,

malfunction, or electric shock.

Use only the supplied power cord

Use only the attached power-supply

cord. Also, the supplied power cord

must not be used with any other

device.

Do not bend the power cord or place heavy objects

on it

Do not excessively twist or bend the

power cord, nor place heavy objects

on it. Doing so can damage the

cord, producing severed elements

and short circuits. Damaged cords

are re and shock hazards!

Avoid extended use at high volume

This unit, either alone or in

combination with an amplier

and headphones or speakers, may

be capable of producing sound

levels that could cause permanent

hearing loss. Do not operate for a long period

of time at a high volume level, or at a level

that is uncomfortable. If you experience any

hearing loss or ringing in the ears, you should

immediately stop using the unit, and consult

an audiologist.

Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 4). These sections provide important

information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature of

your new unit, read Owner’s manual in its entirety. This manual should be saved and kept on hand as a convenient reference.

USING THE UNIT SAFELY

WARNING

Don’t allow foreign objects or liquids to enter

unit; never place containers with liquid on unit

Do not place containers containing

liquid (e.g., ower vases) on this

product. Never allow foreign

objects (e.g., ammable objects,

coins, wires) or liquids (e.g., water or

juice) to enter this product. Doing

so may cause short circuits, faulty

operation, or other malfunctions.

Turn o the unit if an abnormality or malfunction

occurs

Immediately turn the unit o,

remove the AC adaptor from

the outlet, and request servicing

by your retailer, the nearest

Roland Service Center, or an

authorized Roland distributor, as listed on the

“Information” sheet when:

• The AC adaptor, the power-supply cord, or

the plug has been damaged; or

• If smoke or unusual odor occurs; or

• Objects have fallen into, or liquid has been

spilled onto the unit; or

• The unit has been exposed to rain (or

otherwise has become wet); or

• The unit does not appear to operate

normally or exhibits a marked change in

performance.

Adults must provide supervision in places where

children are present

Always make sure that an adult is

on hand to provide supervision and

guidance when using the unit in

places where children are present.

Do not drop or subject to strong impact

Protect the unit from strong impact.

(Do not drop it!)

Do not share an outlet with an unreasonable

number of other devices

Do not force the unit’s power-

supply cord to share an outlet with

an unreasonable number of other

devices.

Be especially careful when using

extension cords—the total power used by all

devices you have connected to the extension

cord’s outlet must never exceed the power

rating (watts/amperes) for the extension cord.

Excessive loads can cause the insulation on the

cord to heat up and eventually melt through.

Do not use overseas

Before using the unit in overseas,

consult with your retailer, the

nearest Roland Service Center, or

an authorized Roland distributor, as

listed on the “Information” sheet.

CAUTION

Place in a well ventilated location

The unit and the AC adaptor should

be located so their location or

position does not interfere with

their proper ventilation.

When disconnecting an AC adaptor, grasp it by the

plug

To prevent conductor damage,

always grasp the AC adaptor by its

plug when disconnecting it from

this unit or from a power outlet.

Periodically clean the AC adaptor’s plug

At regular intervals, you should

unplug the AC adaptor and clean it

by using a dry cloth to wipe all dust

and other accumulations away from

its prongs. Also, disconnect the

power plug from the power outlet whenever

the unit is to remain unused for an extended

period of time. Any accumulation of dust

between the power plug and the power outlet

can result in poor insulation and lead to re.

Manage cables for safety

Try to prevent cords and cables

from becoming entangled. Also, all

cords and cables should be placed

so they are out of the reach of

children.

Avoid climbing on top of the unit, or placing heavy

objects on it

Never climb on top of, nor place

heavy objects on the unit.

Do not connect or disconnect the AC adaptor with

wet hands

Never handle the AC adaptor or

its plugs with wet hands when

plugging into, or unplugging from,

an outlet or this unit.

Disconnect everything before moving the unit

Before moving the unit, disconnect

the AC adaptor and all cords

coming from external devices.

Unplug the AC adaptor from the outlet before

cleaning

Before cleaning the unit, turn it o

and unplug the AC adaptor from the

outlet (p. 12).

If there is a possibility of lightning strike,

disconnect the AC adaptor from the outlet

Whenever you suspect the

possibility of lightning in your area,

disconnect the AC adaptor from the

outlet.

CAUTION

Keep small items out of the reach of children

To prevent accidental ingestion

of the parts listed below, always

keep them out of the reach of small

children.

• Included Parts

RCA-BNC conversion plug (p. 15)

Handle the ground terminal carefully

If you remove the screw from the

ground terminal, be sure to replace

it; don’t leave it lying around where

it could accidently be swallowed by

small children. When refastening

the screw, make that it is rmly fastened, so it

won’t come loose.

Take care not to get burned

The area of SDI connectors on the

rear panel may become hot, so take

care to avoid burns.

Precautions concerning use of phantom power

supply

Always turn the phantom power

o when connecting any device

other than condenser microphones

that require phantom power.

You risk causing damage if you

mistakenly supply phantom power to dynamic

microphones, audio playback devices, or other

devices that don’t require such power. Be sure

to check the specications of any microphone

you intend to use by referring to the manual

that came with it.

• This instrument’s phantom power:

+48 V DC, 5 mA Max

Product specificaties

Merk:	Roland
Categorie:	Niet gecategoriseerd
Model:	VR-50HD
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	5300 g
Breedte:	434 mm
Diepte:	306 mm
Hoogte:	149 mm
Aan/uitschakelaar:	Ja
Beeldschermdiagonaal:	7 "
Resolutie:	800 x 480 Pixels
Ethernet LAN:	Nee
Ondersteunde video-modi:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Type stroombron:	AC
Meegeleverde kabels:	AC
Inclusief AC-adapter:	Ja
Composiet video-ingang:	4
Formaat analoog signaal:	NTSC, PAL
Aansluiting voor netstroomadapter:	Ja
HD type:	Full HD
Videoresoluties:	1024 x 768,1280 x 1024,1280 x 720,1400 x 1050,1920 x 1080 Pixels
VGA (D-Sub) invoer ports:	2
Audio (L,R) out:	1
Ondersteunt Windows:	Windows 10, Windows 8, Windows 8.1
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Mac-compatibiliteit:	Ja
Rack-montage:	Nee
Output current:	2.5 A
Spanning:	24 V
Composiet video-uitgang:	2
HDMI in:	4
Aantal HDMI-uitgangen:	3
XLR in:	Ja
Bedrijfstemperatuur (T-T):	0 - 40 °C
Type beeldscherm:	LCD
Videobewerking:	10 Bit