Roland V-1SDI Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Roland V-1SDI (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 243 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
Before using the V-1SDI, ensure that its system program is at the most recent version. For information on available
upgrades for the system program, see the Roland website (http://proav.roland.com). You can check the system
program version by pressing and holding the [SETUP] button “VERSION” at the SETUP menu (page 16/16).g
Owners Manual (this document)
Read this rst. It explains the basic things you need
to know in order to use the V-1SDI.
PDF Manual (download from the Web)
5Remote Control Guide
This manual covers remote control of the V-1SDI via
MIDI, menu items, and RS-232 commands.
To obtain the PDF manual
1. Enter the following URL in your computer.
http://proav.roland.com
I
2. Go to the V-1SDI product page and click
the “Support” tab.
Copyright © 2016 ROLAND CORPORATION
2
Contents
USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Top Panel/Front Panel . . . . . . . . . . . . . . . . . . . . . . . 6
Rear Panel (for Equipment Connections) . . . . . . . 8
Side Panel (for Equipment Connections) . . . . . . . . 10
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning the Power On and O . . . . . . . . . . . . . . . . 11
Turning O the Power Automatically
(Auto O ) . . . . . . 11
Using the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Saving/Recalling Settings (Memory) . . . . . . . . . . . 13
Video Input/Output Settings . . . . . . . . . . . . . . . . . 14
Setting the Video Input/Output Format . . . . . . . . 14
Adjusting Output Video . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting HDMI Input Video on Channel 4 . . . . . . 15
Assigning a Video Source to Channel 3 . . . . . . . . . 16
Switching the View Mode of Preview Output . . . . 16
Inputting Copyright-protected (HDCP) Video . . . 17
Video Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Switching the Video . . . . . . . . . . . . . . . . . . . . . . . . . 18
About the Operation Mode for Video
Transitions . . . . . 18
Switching Using the PGM/PST Mode . . . . . . . . . 18
Switching in the A/B Mode . . . . . . . . . . . . . . . . . 19
Switching Automatically (Auto Scan) . . . . . . . . . 20
Freezing Input Video (Freeze) . . . . . . . . . . . . . . . . . 20
Applying a Fade to the Main Output Video
(Output Fade) . . . 21
Video Composition Operations . . . . . . . . . . . . . . . 22
Selecting a Composition Type . . . . . . . . . . . . . . . . 22
Compositing Four Video Pictures
into One Screen . . . 22
Compositing Using Picture-in-Picture . . . . . . . . . . 23
Compositing Using Split . . . . . . . . . . . . . . . . . . . . . 24
Compositing Using DSK . . . . . . . . . . . . . . . . . . . . . . 24
Audio Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting the Volume Level . . . . . . . . . . . . . . . . . . 26
Applying Eects to Audio . . . . . . . . . . . . . . . . . . . . 27
Applying Eects to Input Audio . . . . . . . . . . . . . 27
Applying Eects to Output Audio . . . . . . . . . . . 28
Interlinking Audio Output to Video Switching
(Audio Follow) . . 29
Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Returning Settings to the Factory-
default State (Factory Reset) . . . . . 30
Preventing Unintended Operation (Panel Lock). . 30
Operating the V-1SDI by Remote Control . . . . . . . 31
Appendices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Transition Eects List . . . . . . . . . . . . . . . . . . . . . . . . 33
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . 36
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Checking the Included Items
The V-1SDI includes the following items. Please take a moment to conrm that all of these items have
been included with the V-1SDI. If you nd that any item is missing, contact the nearest authorized Roland
distributor in your country.
The Unit
AC Adaptor/Power Cord Cord Hook Owners Manual
* The shape of the power cord’s plug
varies depending on the country.
Before using this unit, carefully read “USING THE UNIT
SAFELY (p. 3) and “IMPORTANT NOTES” (p. 5).
After reading, keep the document(s) including those
sections where it will be available for immediate reference.
3
USING THE UNIT SAFELY
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse eects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The symbol alerts the user to things that must be
carried out. The specic thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the
power-cord plug must be unplugged from the outlet.
The symbol alerts the user to important
instructions or warnings.The specic meaning of the
symbol is determined by the design contained within
the triangle. In the case of the symbol at lef t, it is used
for general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specic thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
About WARNING and CAUTION Notices
About the Symbols
ALWAYS OBSERVE THE FOLLOWING
WARNING
To completely turn o power to the unit, pull out the plug
from the outlet
Even with the power switch turned o, this
unit is not completely separated from its main
source of power. When the power needs to
be completely turned o, turn o the power
switch on the unit, then pull out the plug from the
outlet. For this reason, the outlet into which you choose
to connect the power cord’s plug should be one that is
within easy reach and readily accessible.
Concerning the Auto O function
On this unit, the power is automatically turned
o after a predetermined amount of time has
passed since an operation was performed
(Auto O function). If you do not want the
power to be turned o automatically, disengage the
Auto O function (p. 11).
Do not disassemble or modify by yourself
Do not carry out anything unless you are
instructed to do so in the owners manual.
Otherwise, you risk causing malfunction.
Do not repair or replace parts by yourself
Refer all servicing to your retailer, the nearest
Roland Service Center, or an authorized Roland
distributor, as listed on the “Information.
Do not place in an unstable location
Otherwise, you risk injury as the result of the
unit toppling over or dropping down.
WARNING
Do not use or store in the following types of locations
• Subject to temperature extremes (e.g.,
direct sunlight in an enclosed vehicle, near
a heating duct, on top of heat-generating
equipment); or are
• Damp (e.g., baths, washrooms, on wet
oors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and shakiness; or are
• Placed in a poorly ventilated location.
Use only the supplied AC adaptor and the correct voltage
Be sure to use only the AC adaptor supplied
with the unit. Also, make sure the line voltage
at the installation matches the input voltage
specied on the AC adaptor’s body. Other AC
adaptors may use a dierent polarity, or be designed for
a dierent voltage, so their use could result in damage,
malfunction, or electric shock.
Use only the supplied power cord
Use only the attached power cord. Also, the
supplied power cord must not be used with
any other device.
Do not bend the power cord or place heavy
objects on it
Otherwise, re or electric shock may result.
Avoid extended use at high volume
Use of the unit at high volume for extended
periods of time may cause hearing loss. If you
ever experience any hearing loss or ringing in
the ears, you should immediately stop using
the unit and consult a specialized physician.


Product specificaties

Merk: Roland
Categorie: Niet gecategoriseerd
Model: V-1SDI
Soort bediening: Button,Jog dial,T-bar fader
Kleur van het product: Zwart
Ingebouwd display: Nee
Gewicht: 1200 g
Breedte: 313 mm
Diepte: 108 mm
Hoogte: 59 mm
Interface: USB
Ingebouwd toetsenbord: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Roland V-1SDI stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Roland

Roland

Roland PDQ-8 Handleiding

21 December 2024
Roland

Roland PDQ-8S Handleiding

21 December 2024
Roland

Roland CYQ-12 Handleiding

21 December 2024
Roland

Roland PD-9 Handleiding

9 December 2024
Roland

Roland PD-7 Handleiding

9 December 2024
Roland

Roland KDQ-8 Handleiding

9 December 2024
Roland

Roland NEQ-K Handleiding

9 December 2024
Roland

Roland KD-12 Handleiding

9 December 2024
Roland

Roland KD-18 Handleiding

9 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd