Roland TR-8 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Roland TR-8 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 242 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
1
Contents of Ver. 1.50
Playing the SP-404A (or SP-404SX) from the TR-8
If you connect the TR-8 via MIDI to the SP-404A or SP-404SX
(subsequently called the “SP”), you can use operations on the TR-8 to
trigger sounds on the SP.
The order in which the TR-8’s INST select buttons are arranged ([BD],
[SD], ... , [RC] button) corresponds to the SP’s pads [1]–[11].
MEMO
It’s not possible to trigger the SPs pad [12] from the TR-8.
1. Use a MIDI cable to connect the TR-8’s MIDI OUT connector
to the SP’s MIDI IN connector.
2. SP While holding down the [SHIFT] button (or [FUNC]
button), press pad [9] (MIDI CH).
3. SP Turn the [CTRL 3] knob to set the MIDI channel to “1.
4. SP Press the [REC] button.
The SP’s MIDI channel (Pad Base Ch.) is set to “1.
MEMO
MIDI channels 1 and 2 are used to trigger the SP from the TR-8.
In order to trigger the SP correctly, set the TR-8’s MIDI channel
(the MIDI channel used to trigger the TR-8’s internal sounds) to
something other than 1 or 2 (default: channel 10).
5. SP While holding down the [SHIFT] button (or [FUNC]
button), press pad [10] (MIDI SYNC).
6. SP Turn the [CTRL 3] knob to set the MIDI
synchronization mode to “tnP (Tempo Sync) or oFF” (Sync
OFF).
7. SP Press the [REC] button.
The SP’s MIDI synchronization mode is set to “tnP (Tempo Sync) or
oFF (Sync OFF).
8. TR-8 Turn on the power, and press the DRUM SELECT
[INST] button.
9. TR-8 Press pad [16] to select which sound module is
played when you press the [BD]–[RC] buttons.
The color changes each time you press pad [16].
Pad [16]
status Sound module that is played
Lit white The TR-8’s internal sounds are played.
Blinking
yellow
The TR-8’s internal sounds and the SPs sounds are played
simultaneously.
Blinking
blue The SP’s internal sounds are played.
MEMO
When the pad [16] color is yellow or blue, you can turn the
[TEMPO] knob to select the sample bank (or pattern bank) that is
played by the SP.
Support for USB Audio Sample Rates 44.1/48/96 kHz
Windows users
1. Access the control panel as follows.
1. Click the [Start] button.
2. Click the [TR-8] icon.
The control panel appears.
2. From the SAMPLE RATE parameter, select the sample rate.
Copyright © 2014 ROLAND CORPORATION
04
TR-8 Update
TR-8 Update
2
Mac users
1. In the Finder menu item “Move, click “Application.
The application folder appears.
2. Double-click the [Utility] folder.
3. Double-click the [Audio MIDI Settings] icon.
The Audio Devices screen appears.
If the audio devices screen does not appear, choose the Audio MIDI
Settings menu item Windows” and click “Show Audio Devices.
4. From the Format parameter, select the sample rate.
TR-8 Update
3
Contents of Ver. 1.20
Additional sounds
The sounds of the TR-606 have been added.
* These sounds are added only if the 7X7-TR8 Drum Machine
Expansion is installed.
Switching the cymbal parameter operating mode
We’ve added a HIHAT Link mode that lets you operate the CH (closed
hi-hat) and OH (open hi-hat) parameters simultaneously.
This mode makes it possible to adjust the master tuning of cymbal-
type sounds.
* (TR-606/TR-808 sounds only)
1. While holding down the [PTN SELECT] button, turn on the
power.
2. Press pad [8] to switch the operating mode.
ON (lit)
Use the CH [TUNE] knob to simultaneously adjust the tuning
of CH and OH. The CH [LEVEL] fader simultaneously adjusts
the volume of CH and OH.
The OH [TUNE] knob adjusts the master tuning of cymbal-
type sounds (TR-606/TR-808 sounds only).
OFF (unlit) The CH/OH tuning and volume are adjusted by each
controller (default setting).
Fixed a problem when the sequencer is running
5We xed a problem that had caused notes to sometimes be
unintentionally delayed.
5We xed a problem that had caused data diering from that
listed in the MIDI implementation chart to be output when using
alternate sounds.
Fixed a problem in INST PLAY
We xed a problem that had caused the wrong MIDI data to be
output when the ROLL button is operated while muted.
Fixed a problem in SIDE CHAIN operation
We xed a problem that had caused the SD (snare drum) COMP to
stop working when the SIDE CHAIN type is set to 4 or 7.
Contents of Ver. 1.12
Switching the pattern sequencer’s operating mode
Now you can change the operating mode of the pattern sequencer.
* Until Ver. 1.11, the sequencer operated with timing that models
the TR-808.
1. While holding down the [PTN SELECT] button, turn on the
power.
2. Press pad [7] to switch the operating mode.
ON (lit) The pattern sequencer operates with precise timing.
OFF (unlit) The pattern sequencer operates with timing that models the
TR-808. (Default)
Fixed a problem with TR-REC
We xed the problem in which it became impossible to set LAST
STEP to “1.
Contents of Ver. 1.11
Adding an accent to an instruments performance
5When using INST-PLAY (realtime performance) or INST-REC (realtime
recording), you can hold down the ACCENT [STEP] button and press a
pad to add an accent to the specied step.
To adjust the volume of the accent, use the ACCENT [LEVEL] knob in
the same way as for TR-REC (step recording).
5INST-REC (realtime recording) now lets you record an accent at the
step location that you play.
Color indication of the instrument’s sound (tone)
When selecting a tone, the color that is shown when you press a pad
now distinguishes the tone.
TR-808 type Pink
TR-909 type Yellow
Fixed a problem with ASSIGNABLE OUT
We have xed a problem that had caused the eect sound to be sent
to MIX OUT when an instrument with reverb or delay applied was
assigned to ASSIGNABLE OUT.
* Properly speaking, an instrument assigned to ASSIGNABLE OUT
should not be output from MIX OUT.


Product specificaties

Merk: Roland
Categorie: Niet gecategoriseerd
Model: TR-8
Ingebouwd display: Ja
Gewicht: 1900 g
Breedte: 400 mm
Diepte: 260 mm
Hoogte: 65 mm
Gebruikershandleiding: Ja
USB-poort: Ja
USB-connectortype: USB Type-B
Type stroombron: AC
Inclusief AC-adapter: Ja
Hoeveelheid weerkaatsingstypes: 4
Soundeffects: Delay,Reverberation
MIDI in: Ja
MIDI out: Ja
Aansluiting voor netstroomadapter: Ja
Aantal karakters beeldscherm: 4
Type beeldscherm: LED
Synchronisatie ingangsimpedantie: 100000 Ohm
Aantal drumsets: 16
Type drumgeluiden: Bekken
Tempobereik: 40 - 300 bpm
Gebruiker ritmepatronen: 16

Heb je hulp nodig?

Als je hulp nodig hebt met Roland TR-8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Roland

Roland

Roland PDQ-8 Handleiding

21 December 2024
Roland

Roland PDQ-8S Handleiding

21 December 2024
Roland

Roland CYQ-12 Handleiding

21 December 2024
Roland

Roland PD-9 Handleiding

9 December 2024
Roland

Roland PD-7 Handleiding

9 December 2024
Roland

Roland KDQ-8 Handleiding

9 December 2024
Roland

Roland NEQ-K Handleiding

9 December 2024
Roland

Roland KD-12 Handleiding

9 December 2024
Roland

Roland KD-18 Handleiding

9 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd