Roland HP-237R Handleiding

Roland Niet gecategoriseerd HP-237R

Lees hieronder de 📖 handleiding in het Nederlandse voor Roland HP-237R (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 202 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

DIGITAL PIANO Date: Feb. 1, 2000

Model HP-237 Version: 1.01MIDI Implementation

1. Receive Data

■Channel Voice Messages

●Note o

Status 2nd byte 3rd byte

8nH kkH vvH

9nH kkH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note o velocity : 00H-7FH (0-127)

* The velocity values of Note O messages are ignored.

●Note on

Status 2nd byte 3rd byte

9nH kkH vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note on velocity: 01H-7FH (1-127)

* Note numbers outside the range of 15-113 are transposed to the nearest octave within

this range.

* Transpose function does not aect the recognized note numbers.

●Control Change

* The value specied by a Control Change message will not be reset even by a Program

Change, etc.

❍Data Entry (Controller number 6, 38)

Status 2nd byte 3rd byte

BnH 06H mmH

BnH 26H llH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

mm, ll = the value of the parameter specied by RPN

❍Volume (Controller number 7)

Status 2nd byte 3rd byte

BnH 07H vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Volume: 00H-7FH (0-127), Initial Value = 7FH (127)

* Received volume messages aect received note event levels, and cannot aect

internal keyboard notes.

❍Expression (Controller number 11)

Status 2nd byte 3rd byte

BnH 0BH vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Expression : 00H-7FH (0-127), Initial Value = 7FH (127)

* These message can aect only MIDI notes.

❍Hold 1 (Controller number 64)

Status 2nd byte 3rd byte

BnH 40H vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

* These message can aect only MIDI notes.

❍Sostenuto (Controller number 66)

Status 2nd byte 3rd byte

BnH 42H vvH

* These message can aect only MIDI notes.

n=MIDI channel number: 0H-FH (ch.1-ch.16)

vv=Control value: 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

* These message can aect only MIDI notes.

❍Soft (Controller number 67)

Status 2nd byte 3rd byte

BnH 43H vvH

n=MIDI channel number: 0H-FH (ch.1-ch.16)

vv=Control value: 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

* These message can aect only MIDI notes.

❍Eect 1 (Reverb Send Level) (Controller number 91)

Status 2nd byte 3rd byte

BnH 5BH vvH

n=MIDI channel number: 0H-FH (ch.1-ch.16)

vv=Control value: 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

❍Eect 3 (Chorus Send Level) (Controller number 93)

Status 2nd byte 3rd byte

BnH 5DH vvH

n=MIDI channel number: 0H - FH (ch.1 - ch.16)

vv=Control value: 00H - 7FH (0 - 127) 0-63=OFF 64-127=ON

❍RPN MSB/LSB (Controller number 100, 101)

Status 2nd byte 3rd byte

BnH 65H mmH

BnH 64H llH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm = upper byte of parameter number specied by RPN

ll = lower byte of parameter number specied by RPN

* The value specied by RPN will not be reset even by messages such as Program Change

or Reset All Controller.

**RPN**

The RPN (Registered Parameter Number) messages are expanded control changes, and each

function of an RPN is described by the MIDI Standard.

To use these messages, you must rst use RPN MSB and RPN LSB messages to specify the

parameter to be controlled, and then use Data Entry messages to specify the value of the

specied parameter. Once an RPN parameter has been specied, all Data Entry messages

received on that channel will modify the value of that parameter. To prevent accidents, it is

recommended that you set RPN Null (RPN Number = 7FH/7FH) when you have nished

setting the value of the desired parameter.

On the HP-237, RPN can be used to modify the following parameters.

RPN Data entry

MSB LSB MSB LSB Explanation

00H 01H mmH llH Master Fine Tuning

mm, ll: 00 00H - 40 00H - 7F 7FH

(-100 - 0 - +99.99 cents),

Initial Value = 40 00H (±0 cent)

7FH 7FH --- --- RPN null

Set condition where RPN and NRPN are

unspecied. The data entry messages after set

RPN null will be ignored. (No Data entry

messages are required after RPN null).

Settings already made will not change.

mm, ll: ignored

●Program Change

Status 2nd byte

CnH ppH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

pp = Program number: 00H..2CH (prog.1..prog.45)

Received program change message are assigned as follows.

prog. tone

1 Piano 1

2 Piano 2

3 ---

4 Harpsichord

5 Vibraphone

6 Electric Piano 1

7 Electric Piano 2

8 Pipe Organ

9 Strings

10 Piano1 + Piano2

11 Piano1 + Harpsichord

12 Piano1 + Vibraphone

13 Piano1 + Electric Piano1

14 Piano1 + Electric Piano2

15 Piano1 + Pipe Organ

16 Piano1 + Strings

17 Piano2 + Harpsichord

18 Piano2 + Vibraphone

19 Piano2 + Electric Piano1

20 Piano2 + Electric Piano2

21 Piano2 + Pipe Organ

22 Piano2 + Strings

23 Harpsichord + Vibraphone

24 Harpsichord + Electric Piano1

25 Harpsichord + Electric Piano2

26 Harpsichord + Pipe Organ

27 Harpsichord + Strings

28 Vibraphone + Electric Piano1

29 Vibraphone + Electric Piano2

30 Vibraphone + Pipe Organ

31 Vibraphone + Strings

32 Electric Piano1 + Electric Piano2

33 Electric Piano1 + Pipe Organ

34 Electric Piano1 + Strings

35 Electric Piano2 + Pipe Organ

36 Electric Piano2 + Strings

37 Pipe Organ + Strings

38 Piano1 + Acoustic Bass

39 Piano2 + Acoustic Bass

40 Harpsichord + Strings

41 Vibraphone + Acoustic Bass

42 Electric Piano1 + Acoustic Bass

43 Electric Piano2 + Acoustic Bass

44 Harpsichord + Pipe Organ

45 Piano1 + Strings

* 10-37 are in Dual Play mode.

* 38-45 are in Split Play mode.

* Any Program Number other than those listed above that are received by the HP-237 are

ignored.

* After a Program Change message is received, the sound will change beginning with the

next Note-on. Voices already sounding when the Program Change message was received

will not be aected.

■Channel Mode Messages

●Reset All Controllers (Controller number 121)

Status 2nd byte 3rd byte

BnH 79H 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* When this message is received, the following controllers will be set to their reset

values.

Controller Reset value

Expression 127 (max)

Hold 1 0 (o)

Sostenuto 0(o)

Soft 0(o)

●Local Control

Status 2nd byte 3rd byte

BnH 7BH 00H

BnH 7AH vvH

n=MIDI channel number: 0H - FH (ch.1 - ch.16)

vv=Value: 00H, 7FH (0, 127) 0=OFF 127=ON

●All Notes O (Controller number 123)

Status 2nd byte 3rd byte

BnH 7BH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* When All Notes O is received, all notes on the corresponding channel will be turned

o. However if Hold 1 or Sostenuto is ON, the sound will be continued until these are

turned o.

●OMNI OFF (Controller number 124)

Status 2nd byte 3rd byte

BnH 7CH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* The instrument will behave in the same way as it does when an "All Notes O" message

is received. The mode will be OMNI OFF, POLY(Mode 3).

●OMNI ON (Controller number 125)

Status 2nd byte 3rd byte

BnH 7DH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* The instrument will behave in the same way as it does when an "All Notes O" message

is received. The mode will be OMNI ON, POLY(Mode 1).

●MONO (Controller number 126)

Status 2nd byte 3rd byte

BnH 7EH mmH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

mm = mono number: 00H-10H (0-16)

* The same processing will be carried out as when All Notes O is received.

●POLY (Controller number 127)

Status 2nd byte 3rd byte

BnH 7FH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* The same processing will be carried out as when All Notes O is received.

■System Realtime Message

●Active Sensing

Status

FEH

* When Active Sensing is received, the unit will begin monitoring the intervals of all

further messages. While monitoring, if the interval between messages exceeds 360 msec,

the same processing will be carried out as when All Notes O and Reset All Controllers

are received, and message interval monitoring will be halted.

■System Exclusive Message

Status Data byte Status

F0H iiH, ddH, ......,eeH F7H

F0H: System Exclusive Message status

ii = ID number: an ID number (manufacturer ID) to indicate the manufacturer whose

Exclusive message this is. Roland's manufacturer ID is 41H. ID numbers

7EH and 7FH are extensions of the MIDI standard; Universal Non-realtime

Messages (7EH) and Universal Realtime Messages (7FH).

dd,...,ee = data: 00H-7FH (0-127)

F7H: EOX (End Of Exclusive)

The System Exclusive Messages received by the HP-237 are; Universal Non-realtime System

Exclusive messages, and Data Set (DT1).

●Universal Non-realtime System Exclusive Messages

❍Identity Request Message

Status Data byte Status

F0H 7FH, dev, 06H, 01H F7H

Byte Explanation

FOH Exclusive status

7FH ID number (universal non-realtime message)

dev Device ID (dev: UNIT#-1)

06H Sub ID#1 (General Information)

01H Sub ID#2 (Identity Request)

F7H EOX (End Of Exclusive)

* When Identity Request is received, Identity Reply message will be transmitted.

* Even if the Device ID is 7FH(Broadcast), Identity Reply message will be transmitted.

* The "dev" is own device number (UNIT#-1) or 7FH (Broadcast).

* UNIT# is always the same as the current MIDI Tx/Rx channel.

●Data transmission

HP-237 can transmit and receive the various parameters using System Exclusive messages.

The exclusive message of HP-237 data has a model ID of 1AH, and device ID is dened by

MIDI UNIT NUMBER.

UNIT NUMBER is always the same as the current MIDI Tx/Rx channel.

❍Data set 1 DT1

This is the message that actually performs data transmission, and is used when you wish

to transmit the data.

Status Data byte Status

F0H 41H, dev, 1AH, 12H, aaH, bbH, ddH, sum F7H

Byte Explanation

F0H Exclusive status

41H ID number (Roland)

dev Device ID (dev: UNIT#-1)

1AH Model ID (HP-237)

12H Command ID (DT1)

aaH Address MSB: upper byte of the starting address of the transmitted data

bbH Address LSB: lower byte of the starting address of the transmitted data

ddH Data: the actual data to be transmitted.

sum Checksum

F7H EOX (End Of Exclusive)

* If "Data Set 1" is transmitted successively, there must be an interval of at least 40 msec

between packets.

* Regarding the address please refer to section 3 (Parameter Address Map).

* Regarding the checksum please refer to section 4 (Supplementary material).

2. Transmit Data

■Channel Voice Messages

●Note o

Status 2nd byte 3rd byte

8nH kkH 40H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

kk = note number: 0FH-71H (15-113)

●Note on

Status 2nd byte 3rd byte

9nH kkH vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

kk = note number: 0FH-71H (15-113)

vv = note on velocity : 01H-7FH (1-127)

* Note number's range can be changed with Key Transpose and Octave Shift.

●Control Change

* The value specied by a Control Change message will not be reset even by a Program

Change, etc.

❍Data Entry (Controller number 6, 38)

Status 2nd byte 3rd byte

BnH 06H mmH

BnH 26H llH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

mm, ll = the value of the parameter specied by RPN

* Data Entry is sent through the basic channel.

❍Hold 1 (Controller number 64)

Status 2nd byte 3rd byte

BnH 40H vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Control value : 00H,7FH (0, 127) 0 = OFF, 127 = ON

❍Sostenuto (Controller number 66)

Status 2nd byte 3rd byte

BnH 42H vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Control value : 00H,7FH (0, 127) 0 = OFF, 127 = ON

❍Soft (Controller number 67)

Status 2nd byte 3rd byte

BnH 43H vvH

n=MIDI channel number : 0H-FH (ch.1 - ch.16)

vv=Control value: 00H,7FH (0, 127) 0 = OFF, 127 = ON

❍Eect 1 (Reverb Send Level) (Controller number 91)

Status 2nd byte 3rd byte

BnH 5BH vvH

n=MIDI channel number : 0H - FH (ch.1 - ch.16)

vv=Control value: 00H,7FH (0, 127) 0 = OFF, 127 = ON

❍RPN MSB/LSB (Controller number 100, 101)

Status 2nd byte 3rd byte

BnH 65H mmH

BnH 64H llH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

mm = upper byte of parameter number specied by RPN

ll = lower byte of parameter number specied by RPN

* RPN is sent through the basic channel.

Product specificaties

Merk:	Roland
Categorie:	Niet gecategoriseerd
Model:	HP-237R

Heb je hulp nodig?

Als je hulp nodig hebt met Roland HP-237R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Roland

Roland KS-V7 Handleiding

16 November 2024

Roland RD-88 EX Handleiding

25 September 2024

Roland VR-400UHD Handleiding

7 Augustus 2024

Roland GO:PODCAST Handleiding

10 Juni 2024

Roland RDH-120 Handleiding

29 Mei 2024

Roland SCOOPER Handleiding

29 Mei 2024

Roland ST-A95 Handleiding

29 Mei 2024

Roland M-UF2G Handleiding

29 Mei 2024

Roland MDS-4 Handleiding

29 Mei 2024

Roland BKT-S Handleiding

29 Mei 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024