Roland F-30 Handleiding

Roland Niet gecategoriseerd F-30

Lees hieronder de 📖 handleiding in het Nederlandse voor Roland F-30 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
1
DIGITAL PIANO Date: Oct 8, 2002
Model:F-30 Version 1.00MIDI IMPLEMENTATION
1. Receive Data
■Channel Voice Messages
●Note o
Status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number : 0H-FH (ch.1-ch.16)
kk = note number : 00H-7FH (0-127)
vv = note o velocity : 00H-7FH (0-127)
* The velocity values of Note O messages are ignored.
●Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
kk = note number : 00H-7FH (0-127)
vv = note on velocity : 01H-7FH (1-127)
* Note numbers outside the range of 15-113 are transposed to the nearest octave within
this range.
* Transpose function does not aect the recognized note numbers.
●Control Change
* The value specied by a Control Change message will not be reset even by a Program
Change, etc.
❍Data Entry (Controller number 6, 38)
Status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
mm, ll = the value of the parameter specied by RPN
❍Volume (Controller number 7)
Status 2nd byte 3rd byte
BnH 07H vvH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
vv = Volume : 00H-7FH (0-127), Initial Value = 7FH (127)
* Received volume messages aect received note event levels, and cannot aect internal
keyboard notes.
❍Expression (Controller number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
vv = Expression : 00H-7FH (0-127), Initial Value = 7FH (127)
* These message can aect only MIDI notes.
❍Hold 1 (Controller number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON
* These message can aect only MIDI notes.
❍Sostenuto (Controller number 66)
Status 2nd byte 3rd byte
BnH 42H vvH
n=MIDI channel number : 0H-FH (ch.1-ch.16)
vv=Control value : 00H-7FH (0-127) 0-63 = OFF 64-127 = ON
* These message can aect only MIDI notes.
❍Soft (Controller number 67)
Status 2nd byte 3rd byte
BnH 43H vvH
n=MIDI channel number : 0H-FH (ch.1-ch.16)
vv=Control value : 00H-7FH (0-127) 0-63 = OFF 64-127 = ON
* These message can aect only MIDI notes.
❍Eect 1 (Reverb Send Level) (Controller number 91)
Status 2nd byte 3rd byte
BnH 5BH vvH
n=MIDI channel number : 0H-FH (ch.1-ch.16)
vv=Control value : 00H-7FH (0-127) 0-63 = OFF 64-127 = ON
❍RPN MSB/LSB (Controller number 100, 101)
Status 2nd byte 3rd byte
BnH 65H mmH
BnH 64H llH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
mm = upper byte of parameter number specied by RPN(MSB)
ll = lower byte of parameter number specied by RPN(LSB)
* The value specied by RPN will not be reset even by messages such as Program Change
or Reset All Controller.
* *RPN**
The RPN (Registered Parameter Number) messages are expanded control changes, and each
function of an RPN is described by the MIDI Standard.
To use these messages, you must rst use RPN MSB and RPN LSB messages to specify the
parameter to be controlled, and then use Data Entry messages to specify the value of the
specied parameter. Once an RPN parameter has been specied, all Data Entry messages
received on that channel will modify the value of that parameter. To prevent accidents, it is
recommended that you set RPN Null (RPN Number = 7FH/7FH) when you have nished
setting the value of the desired parameter.
On the F-30, RPN can be used to modify the following parameters.
RPN Data entry
MSB LSB MSB LSB Explanation
00H 01H mmH llH Master Fine Tuning
mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.99 cents),
Initial Value = 40 00H (±0 cent)
7FH 7FH --- --- RPN null
Set condition where RPN and NRPN are unspecied.
The data entry messages after set RPN null will be ignored.
(No Data entry messages are required after RPN null).
Settings already made will not change.
mm, ll: ignored
2
DIGITAL PIANO Date: Oct 8, 2002 Model:F-30 MIDI IMPLEMENTATION Version 1.00
●Program Change
Status 2nd byte
CnH ppH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
pp = Program number : 00H..40H (prog.1..prog.65)
Received program change message are assigned as follows.
prog. tone
----------------------------------
1 Grand Piano
2 Bright Piano
3 Stage Rhodes
4 E.Piano
5 Harpsichord
6 Organ Flute
7 Pipe Organ
8 Rotaly Organ
9 Strings
10 Choir
11 ---
12 Grand Piano + Stage Rhodes
13 Grand Piano + E.Piano
14 Grand Piano + Harpsichord
15 Grand Piano + Organ Flute
16 Grand Piano + Pipe Organ
17 Grand Piano + Rotaly Organ
18 Grand Piano + Strings
19 Grand Piano + Choir
20 Bright Piano + Stage Rhodes
21 Bright Piano + E.Piano
22 Bright Piano + Harpsichord
23 Bright Piano + Organ Flute
24 Bright Piano + Pipe Organ
25 Bright Piano + Rotaly Organ
26 Bright Piano + Strings
27 Bright Piano + Choir
28 ---
29 Stage Rhodes + Harpsichord
30 Stage Rhodes + Organ Flute
31 Stage Rhodes + Pipe Organ
32 Stage Rhodes + Rotaly Organ
33 Stage Rhodes + Strings
34 Stage Rhodes + Choir
35 E.Piano + Harpsichord
36 E.Piano + Organ Flute
37 E.Piano + Pipe Organ
38 E.Piano + Rotaly Organ
39 E.Piano + Strings
40 E.Piano + Choir
41 ---
42 Harpsichord + Pipe Organ
43 Harpsichord + Rotaly Organ
44 Harpsichord + Strings
45 Harpsichord + Choir
46 Organ Flute + Pipe Organ
47 Organ Flute + Rotaly Organ
48 Organ Flute + Strings
49 Organ Flute + Choir
50 ---
51 Pipe Organ + Strings
52 Pipe Organ + Choir
53 Rotaly Organ + Strings
54 Rotaly Organ + Choir
55 ---
56 Acoustic Bass | Grand Piano
57 Strings | Grand Piano
58 Vibraphone
59 Electric Bass | Stage Rhodes
60 Clavi
61 Strings | Harpsichord
62 Strings | Pipe Organ
63 Rotary Organ | Jazz Organ
64 Strings + Brass
65 Strings | Flute
* “A+B” means tones for dual, and “A|B” means tones for split.
* “---” and any program number other than those listed above are ignored.
* After a Program Change message is received, the sound will change beginning with the
next Note-on. Voices already sounding when the Program Change message was
received will not be aected.
■Channel Mode Messages
●Reset All Controllers (Controller number 121)
Status 2nd byte 3rd byte
BnH 79H 00H
n = MIDI channel number : 0H-FH (ch.1-ch.16)
* When this message is received, the following controllers will be set to their reset
values.
Controller Reset value
Expression 127 (max)
Hold 1 0 (o)
Sostenuto 0(o)
Soft 0(o)
●Local Control (Controller number 122)
Status 2nd byte 3rd byte
BnH 7AH vvH
n=MIDI channel number : 0H - FH (ch.1 - ch.16)
vv=Value : 00H, 7FH (0, 127) 0=OFF 127=ON
●All Notes O (Controller number 123)
Status 2nd byte 3rd byte
BnH 7BH 00H
n = MIDI channel number : 0H-FH (ch.1-ch.16)
* When All Notes O is received, all notes on the corresponding channel will be
turned o. However if Hold 1 or Sostenuto is ON, the sound will be continued until
these are turned o.
●OMNI OFF (Controller number 124)
Status 2nd byte 3rd byte
BnH 7CH 00H
n = MIDI channel number : 0H-FH (ch.1-ch.16)
* The instrument will behave in the same way as it does when an “All Notes O” message
is received. The mode will be OMNI OFF, POLY(Mode 3).
●OMNI ON (Controller number 125)
Status 2nd byte 3rd byte
BnH 7DH 00H
n = MIDI channel number : 0H-FH (ch.1-ch.16)
* The instrument will behave in the same way as it does when an “All Notes O” message
is received. The mode will be OMNI ON, POLY(Mode 1).
●MONO (Controller number 126)
Status 2nd byte 3rd byte
BnH 7EH mmH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
mm = mono number : 00H-10H (0-16)
* The same processing will be carried out as when All Notes O is received.
●POLY (Controller number 127)
Status 2nd byte 3rd byte
BnH 7FH 00H
n = MIDI channel number : 0H-FH (ch.1-ch.16)
* The same processing will be carried out as when All Notes O is received.
3
DIGITAL PIANO Date: Oct 8, 2002 Model:F-30 MIDI IMPLEMENTATION Version 1.00
■System Realtime Message
●Active Sensing
Status
FEH
* When Active Sensing is received, the unit will begin monitoring the intervals of all
further messages. While monitoring, if the interval between messages exceeds 360 msec,
the same processing will be carried out as when All Notes Oand Reset All Controllers
are received, and message interval monitoring will be halted.
■System Exclusive Message
Status Data byte Status
F0H iiH, ddH, ......,eeH F7H
F0H : System Exclusive Message status
ii = ID number : an ID number (manufacturer ID) to indicate the manufacturer whose
Exclusive message this is. Roland’s manufacturer ID is 41H. ID
numbers 7EH and 7FH are extensions of the MIDI standard; Universal
Non-realtime Messages (7EH) and Universal Realtime Messages
(7FH).
dd,...,ee = data : 00H-7FH (0-127)
F7H : EOX (End Of Exclusive)
The System Exclusive Messages received by the F-30 are; Universal Non-realtime System
Exclusive messages, and Data Set (DT1).
●Universal Non-realtime System Exclusive Messages
❍Identity Request Message
Status Data byte Status
F0H 7EH, dev, 06H, 01H F7H
Byte Explanation
FOH Exclusive status
7EH ID number (universal non-realtime message)
dev Device ID (dev: UNIT#-1)
06H Sub ID#1 (General Information)
01H Sub ID#2 (Identity Request)
F7H EOX (End Of Exclusive)
* The “dev” is own device number (UNIT#-1) or 7FH (Broadcast).
* UNIT# is always the same as the current MIDI Tx/Rx channel.
●Data transmission
F-30 can transmit and receive the various parameters using System Exclusive messages.
The exclusive message of F-30 data has a model ID of 1AH, and device ID is dened by
MIDI UNIT NUMBER.
UNIT NUMBER is always the same as the current MIDI Tx/Rx channel.
❍Data set 1 DT1
This is the message that actually performs data transmission, and is used when you wish
to transmit the data.
Status Data byte Status
F0H 41H, dev, 1AH, 12H, aaH, bbH, ddH, sum F7H
Byte Explanation
F0H Exclusive status
41H ID number (Roland)
dev Device ID (dev: UNIT#-1)
1AH Model ID (F-30)
12H Command ID (DT1)
aaH Address MSB: upper byte of the starting address of the transmitted data
bbH Address LSB: lower byte of the starting address of the transmitted data
ddH Data: the actual data to be transmitted.
sum Checksum
F7H EOX (End Of Exclusive)
* If “Data Set 1” is transmitted successively, there must be an interval of at least 40 msec
between packets.
* Regarding the address please refer to section 3 (Parameter Address Map).
* Regarding the checksum please refer to section 4 (Supplementary material).
2. Section 2. Transmit Data
■Channel Voice Messages
●Note o
Status 2nd byte 3rd byte
8nH kkH 40H
n = MIDI channel number : 0H-FH (ch.1-ch.16)
kk = note number : 0FH-71H (15-113)
●Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
kk = note number : 0FH-71H (15-113)
vv = note on velocity : 01H-7FH (1-127)
* Note number’s range can be changed with Key Transpose.
●Control Change
❍Data Entry (Controller number 6, 38)
Status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
mm, ll = the value of the parameter specied by RPN
❍Hold 1 (Controller number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
vv = Control value : 00H,7FH (0, 127) 0 = OFF, 127 = ON
❍Soft (Controller number 67)
Status 2nd byte 3rd byte
BnH 43H vvH
n=MIDI channel number : 0H-FH (ch.1 - ch.16)
vv=Control value : 00H,7FH (0, 127) 0 = OFF, 127 = ON
❍Eect 1 (Reverb Send Level) (Controller number 91)
Status 2nd byte 3rd byte
BnH 5BH vvH
n=MIDI channel number : 0H - FH (ch.1 - ch.16)
vv=Control value : 00H,7FH (0, 127) 0 = OFF, 127 = ON
❍RPN MSB/LSB (Controller number 100, 101)
Status 2nd byte 3rd byte
BnH 65H mmH
BnH 64H llH
n = MIDI channel number : 0H-FH (ch.1-ch.16)
mm = upper byte of parameter number specied by RPN
ll = lower byte of parameter number specied by RPN
* *RPN**
F-30 can transmit Master ne tuning (RPN #1) and RPN null. After sending the master ne
tune, immediately the RPN Null shall be sent.
RPN Data entry
MSB LSB MSB LSB Explanation
00H 01H mmH llH Master Fine Tuning
mm, ll: 00 00H - 40 00H - 7F 7FH
(-100 - 0 - +99.9 cents)
7FH 7FH--- ---RPN null

Product specificaties

Merk: Roland
Categorie: Niet gecategoriseerd
Model: F-30

Heb je hulp nodig?

Als je hulp nodig hebt met Roland F-30 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Roland

Roland

Roland PDQ-8 Handleiding

21 December 2024
Roland

Roland PDQ-8S Handleiding

21 December 2024
Roland

Roland CYQ-12 Handleiding

21 December 2024
Roland

Roland PD-9 Handleiding

9 December 2024
Roland

Roland PD-7 Handleiding

9 December 2024
Roland

Roland KDQ-8 Handleiding

9 December 2024
Roland

Roland NEQ-K Handleiding

9 December 2024
Roland

Roland KD-12 Handleiding

9 December 2024
Roland

Roland KD-18 Handleiding

9 December 2024
Roland

Roland Graphics Presenter Handleiding

9 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Philips

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024
Philips

Philips Senseo HD7002 Handleiding

24 December 2024
D-Link

D-Link DUB-C2 Handleiding

24 December 2024
Nec

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024
Nec

Nec DS1-TM01 Handleiding

24 December 2024
Profoto

Profoto RFi Softbox Octa Handleiding

24 December 2024
Koenic

Koenic KAP 2523 Handleiding

24 December 2024
Philips

Philips HD9921 Handleiding

24 December 2024
Philips

Philips Senseo HD7008 Handleiding

24 December 2024
Onkyo

Onkyo IRK1804C Handleiding

24 December 2024