Roksan Attessa CD Transport Handleiding

Roksan CD-spelers/recorder Attessa CD Transport

Lees hieronder de 📖 handleiding in het Nederlandse voor Roksan Attessa CD Transport (26 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
Owners Manual
Contents
Introduction
Congratulations on your purchase of the Roksan Attessa CD Transport. This CD transport is designed and
manufactured to the highest specication and rigorously tested to reward you with many years of listening
pleasure.
Your Attessa CD Transport is an integral part of your Hi-Fi system. Its correct installation, set-up and
operation will have a signicant inuence on the performance of the entire Hi-Fi installation. Please read
the contents of this manual thoroughly. It will help you to understand your Hi-Fi equipment better and
further enhance your listening pleasure.
Unpacking
Included in the packing of your CD Transport you will nd:
Mains lead(s) tted with the correct mains power plug for your country.
One Attessa Remote Control and 2 x AAA batteries
One high quality digital coaxial cable
One information pack
After removing these items please retain all packing material and instruction manuals. Correct packing is
necessary for future transportation of your CD Transport.
Warranty
Both the craftsmanship and the performance of this product is covered by the manufacturer’s warranty
against manufacturing defects provided that the product was supplied by an authorised Roksan retailer
under the consumer sale agreement. For the period of cover please refer to the product page on our
website: roksan.com for the product you have purchased.
When purchasing Roksan products, please keep your receipt of purchase safe, as this validates your
warranty.
The words ‘consumer sale’ shall be construed in accordance with section 15 of the supply of goods act
1973. Roksan accepts no responsibility for defects arising from accident, misuse, abuse, wear and tear,
modication or operation outside of that specied within this instruction manual. Neither will responsibility
be accepted for damage or loss occurring during transit to or from the parties claiming under this
guarantee.
This guarantee covers both labour and parts. The liability of Roksan is limited to the cost of repair or
replacement of the defective parts (at the discretion of Roksan) and under no circumstances extends to
consequential losses or damage.
Contents 1
Introduction 1
Unpacking 1
Warranty 1
EU DIRECTIVES 2
AC MAINS SUPPLY 2
Maintenance 2
Location 2
Front Controls 3
Rear Connections 3
Remote 3
Connections 4
Signal 4
Power 4
Operation 4
OLED Display 4
Turning On & Standby 4
Insert Disc 4
Playing a Disc 5
Options Menu 5
Updates 7
Troubleshooting 8
Specications 9
1Attessa CD Transport
roksan.com
EU DIRECTIVES
Roksan declares that the apparatus “Attessa CD Transport” complies with the essential
requirements and other relevant provisions of Directive 1999/5/EC”.
NOTE: This product must be earthed. Please ensure that other equipment connected to it is earthed
according to the manufacturer’s instructions.
AC MAINS SUPPLY
Your Attessa CD Transport is set to operate from a xed supply voltage which is marked on a label next to
the mains input plug. The mains lead supplied with this product has an IEC C13 mains plug which is inserted
into the Mains Input Socket on the unit’s rear panel. The other end is a moulded plug appropriate to that for
your country.
This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so
that it cannot be plugged into a mains socket whilst in a potentially dangerous condition. If your lead has
been damaged please obtain a complete replacement lead from your dealer.
Should you move to another area where either the mains voltage or the mains plugs are different from
those as supplied with your CD transport, please contact the appointed Roksan distributor for assistance.
Please observe correct mains polarity at all times.
The mains fuses are located on the rear panel below the IEC Mains Input Socket. These must only be
replaced by the fuse type and rating as described on the fuse rating label on the rear panel of the unit.
If the equipment is likely to be unused for some time, unplug it from the mains supply.
Maintenance
After disconnecting the CD Transport from the mains supply, the casing and front panel may be cleaned
with a lightly dampened lint-free cloth. Furniture polish can also be used to clean the CD transport. Avoid
using abrasive substances or solvents.
Location
Your CD Transport should be located in a well ventilated area and kept away from sources of heat, dust,
humidity and direct sunlight.
The CD Transport may be positioned either as a free standing unit or alongside other audio/video
product(s). Never place the CD Transport on other electronic equipment, carpet or any surface likely to
hinder normal ventilation. Never allow liquids or other objects to fall into the unit.
When purchased with an Attessa Amplier or Streamer, we recommend placing the CD Transport below the
Amplier or Streamer
NOTE: This unit contains no user serviceable parts. Do not remove any panels or attempt to service it
yourself. Unauthorised servicing will void the warranty.
2


Product specificaties

Merk: Roksan
Categorie: CD-spelers/recorder
Model: Attessa CD Transport

Heb je hulp nodig?

Als je hulp nodig hebt met Roksan Attessa CD Transport stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding CD-spelers/recorder Roksan

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder