Rockford Fosgate P1000X1BD Handleiding

Rockford Fosgate Autoradio P1000X1BD

Lees hieronder de 📖 handleiding in het Nederlandse voor Rockford Fosgate P1000X1BD (12 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Installation & Operation

AMPLIFIERS

P300X1 P300X2 P400X1

P400X2 P400X4 P500X1BD

P500X2 P600X4 P1000X1BD

P1000X2 P1000X5

Dear Customer,

Congratulations on your purchase of the world’s ﬁnest brand of car audio

products. At Rockford Fosgate we are fanatics about musical reproduc-

tion at its best, and we are pleased you chose our product. Through

years of engineering expertise, hand craftsmanship and critical testing

procedures, we have created a wide range of products that reproduce

music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford

Fosgate product installed by an Authorized Rockford Fosgate Dealer,

as we provide specialized training through Rockford Technical Training

Institute (RTTI). Please read your warranty and retain your receipt and

original carton for possible future use.

Great product and competent installations are only a piece of the puzzle

when it comes to your system. Make sure that your installer is using

100% authentic installation accessories from Rockford Fosgate in your

installation. Rockford Fosgate has everything from RCA cables and

speaker wire to power wire and battery connectors. Insist on it! After all,

your new system deserves nothing but the best.

To add the ﬁnishing touch to your new Rockford Fosgate image order

your Rockford accessories, which include everything from T-shirts to

jackets.

Visit our web site for the latest information on all Rockford products;

www.rockfordfosgate.com

or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other

countries, call +001-480-967-3565 or FAX +001-480-966-3983.

Table of Content

If, after reading your manual, you still have questions regarding this prod-

uct, we recommend that you see your Rockford Fosgate dealer. If you need

further assistance, you can call us direct at 1-800-669-9899. Be sure to

have your serial number, model number and date of purchase available

when you call.

Safety

This symbol with “WARNING” is intended

to alert the user to the presence of important

instructions. Failure to heed the instructions

will result in severe injury or death.

This symbol with “CAUTION” is intended to

alert the user to the presence of important

instructions. Failure to heed the instructions

can result in injury or unit damage.

•To prevent injury and damage to the unit, please read and follow the

instructions in this manual. We want you to enjoy this system, not get

a headache.

•If you feel unsure about installing this system yourself, have it installed

by a qualiﬁed Rockford Fosgate technician.

•Before installation, disconnect the battery negative (-) terminal to

prevent damage to the unit, ﬁre and/or possible injury.

Introduction

Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Speciﬁcations subject to change without notice.

PRACTICE SAFE SOUND

Continuous exposure to sound pressure levels over 100dB may cause

permanent hearing loss. High powered auto sound systems may

produce sound pressure levels well over 130dB. Use common sense

and practice safe sound.

2 Introduction

3 Speciﬁcations

4-5 Design Features

6-17 Installation

Installation Considerations

Mounting Locations

Battery and Charging

Wiring the System

18-19 Operation

Clip Indicator Setup

Adjusting Crossover Frequency

2/4 Channel Switch

Subwoofer Input Switch

Infrasonic Filter

Punch EQ

20 Troubleshooting

21 Limited Warranty Information

Specications

CEA 2006

Power ratings on Rockford Fosgate ampliﬁers conform to CEA-2006 industry standards. These guidelines

mean your ampliﬁer’s output power ratings are REAL POWER numbers, not inﬂated marketing ratings.

Mode P300X2 P400X2 P500X2 P1000X2 P400X4 P600X4 P1000X5 P300X1 P400X1 P500X1BD P1000X1BD

Rated Power -

Continuous

Power Rating

(RMS) Measured

@ 14.4V

100x2 @ 4 ohms

150x2 @ 2 ohms

300x1 @ 4 ohms*

125x2 @ 4 ohms

200x2 @ 2 ohms

400x1 @ 4 ohms*

150x2 @ 4 ohms

250x2 @ 2 ohms

500x1 @ 4 ohms*

300x2 @ 4 ohms

500x2 @ 2 ohms

1000x1 @ 4 ohms*

50x4 @ 4 ohms

100x4 @ 2 ohms

200x2 @ 4 ohms*

75x4 @ 4 ohms

150x4 @ 2 ohms

300x2 @ 4 ohms*

75x4 @ 4 ohms

125x4 @ 2 ohms

250x2 @ 4 ohms*

Sub:

150x1 @ 4 ohms

300x1 @ 2 ohms

500x1 @ 1 ohm

200x1 @ 4 ohms

300x1 @ 2 ohms

250x1 @ 4 ohms

400x1 @ 2 ohms

150x1 @ 4 ohms

300x1 @ 2 ohms

500x1 @ 1 ohms

300x1 @ 4 ohms

600x1 @ 2 ohms

1000x1 @ 1 ohms

Crossover

Slope

12 dB/Oct 12 dB/Oct 12 dB/Oct 12 dB/Oct 12 dB/Oct 12 dB/Oct 12 dB/Oct 12 dB/Oct 12 dB/Oct 12 dB/Oct 12 dB/Oct

Crossover

Frequency

Variable 50Hz-

250Hz

Variable 50Hz-

250Hz

Variable 50Hz-

250Hz

Variable 50Hz-

250Hz

Variable 50Hz-

250Hz

Variable 50Hz-

250Hz

Variable 50Hz-

250Hz

Sub: 28Hz

Variable 50Hz-

250Hz

Variable 50Hz-

250Hz

Variable 50Hz-

250Hz, Sub: 28Hz

Variable 50Hz-

250Hz, Sub: 28Hz

Punch EQ Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0 -+14dB

@ 12.5kHz and

0-+18dB @ 45Hz

Variable 0-+18dB

@ 45Hz

Variable 0-+18dB

@ 45Hz

Operating

Voltage

9-16VDC 9-16VDC 9-16VDC 9-16VDC 9-16VDC 9-16VDC 9-16VDC 9-16VDC 9-16VDC 9-16VDC 9-16VDC

Frequency

Response

20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-250Hz 20Hz-250Hz

Battery Fuse

Rating (not

supplied)

50A 60A 80A 140A 60A 100A 150A 50A 60A 80A 140A

THD+N @

Rated Power

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 4 ohms

<1.0% @ 2 ohms

F/R:

<1.0% @ 4 ohms

<1.0% @ 2 ohms

Sub:

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 1 ohm

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 1 ohm

<1.0% @ 4 ohms

<1.0% @ 2 ohms

<1.0% @ 1 ohm

Input Sensitivity 150mV-12V 150mV-12V 150mV-12V 150mV-12V 150mV-12V 150mV-12V 150mV-12V 150mV-12V 150mV-12V 150mV-12V 150mV-12V

Input Imped-

ance

20k 20k 20k 20k 20k 20k 20k 20k 20k 20k 20k

S/N Ratio CEA

2006

>85dB >85dB >85dB >85dB >85dB >85dB F/R: > 85dB

Sub: >80dB

>85dB >85dB >80dB >80dB

S/N Ratio @

Rated Power

>105dB >105dB >105dB >105dB >105dB >105dB F/R: >105dB

Sub: >100dB

>105dB >105dB >100dB >100dB

Channel

Separation

>50dB >50dB >50dB >50dB >50dB >50dB >50dB N/A N/A N/A N/A

Common Mode

Rejection Ratio

>55dB >55dB >55dB >55dB >55dB >55dB >55dB >55dB >55dB >55dB >55dB

Damping Factor >500 >500 >500 >500 >500 >500 F/R: >500

Sub: >300

>500 >500 >300 >300

Dimensions

(LxWxH)

9.9” x 7.8” x 2.4”

(25cm x 19.7cm x 6.1 cm)

11” x 7.8” x 2.4”

(28cm x 19.7cm x 6.1 cm)

13.3” x 7.8” x 2.4”

(33.7cm x 19.7cm x 6.1 cm)

15” x 7.8” x 2.4”

(38.2cm x 19.7cm x 6.1 cm)

11” x 7.8” x 2.4”

(28cm x 19.7cm x 6.1 cm)

13.3” x 7.8” x 2.4”

(33.7cm x 19.7cm x 6.1 cm)

15” x 7.8” x 2.4”

(38.2cm x 19.7cm x 6.1 cm)

9.9” x 7.8” x 2.4”

(25cm x 19.7cm x 6.1 cm)

9.9” x 7.8” x 2.4”

(25cm x 19.7cm x 6.1 cm)

11” x 7.8” x 2.4”

(28cm x 19.7cm x 6.1 cm)

13.3” x 7.8” x 2.4”

(33.7cm x 19.7cm x 6.1 cm)

* Rated power when ampliﬁer is wired in a bridged conﬁguration.

Design Features

Power/Protect LED

Power LED illuminates blue when the unit is turned on. Protect

LED illuminates yellow if a short circuit or to low of an impedance

is detected at the speaker connections. Thermal LED illuminates

red when ampliﬁer overheats. The ampliﬁer will automatically shut

down if this occurs.

Output Clip Indicator Chart

Reference chart for the output clip in-

dicator LED illumination color during

input level setup.

Speaker Terminals

The Speaker Terminals are nickel-plated

captive c-clamp wire connectors (+ and -)

will accommodate 8 AWG.

RCA Input/Pass-Thru

The RCA inputs are capable of accepting signal from either high-level(speaker) to low-

level(RCA). When utilizing high-level for input signal the auto turn-on feature is active.

The pass-thru RCA’s are passive, including full input signal range and auto turn-on

functionality when active.

Subwoofer Input

Setting this switch to the “On” position, utilizes the

“Sub” inputs. (P1000X5)

Centering Indicators

Indicators are located on the bottom side of the

ampliﬁer.

Output Clip Indicator

The output clip indicator works in conjunction with

the input level knob, illuminating to appropriate

color depending on the audio content used for the

setup.

Intput Clip Indicator

The input clip indicator works in con-

junction with the audio source volume

knob, illuminating red when audio

source reaches it’s clipping point.

Input Level Knob

The input level control is used to match

the output of the audio source.

Design Features

Punch EQ

A Gyrator based Punch EQ that eliminates frequency

shift with boost. This works along with the crossover

switch on the ampliﬁer.

Power/REM Terminals

The power and ground will accommodate 4 AWG,

while the remote will accommodate 12 AWG.(The

REM terminal is used to remotely turn-on and

turn-off the ampliﬁer when +12V DC is applied.)

2/4 Channel Switch

Setting this switch to the 2CH. position, switches the

inputs to a 2-channel mode, allowing connection to

only the front inputs with a 4-channel output. (P400X4,

P600X4, P1000X5)

Crossover Switch

Selectable switch for High-Pass (HP) or

All Pass (AP) or Low-Pass (LP)

Variable Crossover

Is a built-in 12dB/octave Butterworth ﬁlter with

a crossover point variable from 50Hz to 250Hz.

illus.-1.1

Remote Punch Level Control - In/Out

Remotely control the output level of the ampliﬁer. The

PLC-OUT is used to daisy-chain additional ampliﬁers

controlled by a single remote.

Infrasonic Filter

A ﬁxed 28Hz 12dB/octave ﬁlter designed to prevent

frequencies below the audio range from being applied

to the subwoofer from the ampliﬁer. Consequently

improving subwoofer performance and power han-

dling, particularly in vented enclosures. (P500X1BD,

P10001BD, P1000X5)

Remote Punch Level Switch

When activated, this allows the use of a optional re-

mote Punch Level Controller. (P500X1BD, P10001BD,

P1000X5)

INPUT CLIP REAR SUBFRONT

RIGHT

LEFT

RIGHT

LEFT

B+

REM GND

REMOTE

PUNCH LEVEL

PLC-OUTPLC-IN

FRONT REAR

RIGHTLEFT

BRIDGED

RIGHTLEFT

BRIDGED

SUB

SPEAKERS

INPUT

2CH. - 4CH.

Product specificaties

Merk:	Rockford Fosgate
Categorie:	Autoradio
Model:	P1000X1BD
Kleur van het product:	Zwart
Gewicht:	5.85 g
Breedte:	197.1 mm
Diepte:	337.3 mm
Hoogte:	60.5 mm
Efficientie:	86 procent
Maximaal uitgangsvermogen (RMS):	1000 W
Input sensitiviteit:	150 mV
Audio RCA-ingangen:	1
Versterker klasse:	B/D
Aantal versterker kanalen:	1 kanalen
RMS vermogen uitvoer per kanaal (4 Ohm):	300 W
Low pass filter:	Ja
Audio RCA-uitgangen:	1
RMS vermogen uitvoer per kanaal (2 Ohm):	500 W
Bass boost:	0 - 18 dB
Maximaal uitgangsvermogen per kanaal (4 Ohm):	491 W
Maximaal uitgangsvermogen per kanaal (2 Ohm):	874 W
Low-pass filterbereik:	50 - 250 Hz