Roberts Revival Uno BT Handleiding

Roberts Radio Revival Uno BT

Lees hieronder de 📖 handleiding in het Nederlandse voor Roberts Revival Uno BT (3 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Radio, mains adaptor, quick start guide and safety/warranty leaet.

Features

Controls

continued overleaf...

STEP 1 - Plug in & play DAB radioWhat is in the Box?

• DAB / DAB+ / FM RDS wavebands

• Bluetooth audio streaming from smartphone, tablet or laptop

• 2 alarm timers, wake to DAB, FM radio or buzzer

• Station name / multi preset mode

• One touch instant access to favourite station

• Fifties styling

• Adjustable sleep and snooze timers

• FM RDS station name display

• Bass and treble control

• AC adaptor included / Batteries 4 x AA size / LR6 (not included)

• Stereo auxiliary input, line out and headphone sockets

A - Connect to the mains

B - Switch on your radio

C - Select a DAB radio station

Please read the safety leaet provided before connecting your radio to the mains.

1 Place your radio on a at surface.

2 Fully extend the located on the top right hand telescopic aerial

corner.

3 Plug the cable from the mains adaptor into the DC power input

socket. Plug the mains adaptor into a wall socket and switch on the

socket.

4 A start up screen will be displayed and a station scan will be performed.

5 When a signal has been found, the current time will appear on the

display.

Note: If no signals are found it may be necessary to relocate your

radio to a position giving better reception and carry out a scan for

new stations.

On/Off / Volume control1

Headphone socket2

Auxiliary input socket3

Favourite button4

Mode / Alarm button5

Menu / Bluetooth pair button6

7 Auto Tune button

Info / Dimmer button8

9 Preset button

10 Telescopic aerial

11 Tuning / Select / Snooze control

12 LCD display

13 Bluetooth indicator

14 Low battery indicator

15 Loudspeaker

16 DC power input

17 Line output socket

18 Battery compartment

19 Micro USB socket for service use only

(inside battery compartment not shown)

Mode Menu Auto

Tune

Info/

Dimmer

Aux

In PresetFavourite

Low

Battery

2 3 5 6 7 8 9

Line

Out

htooteulB / SDR MF / +BAD / BAD

Digital Radio

Frequency Range

FM: 87.5-108MHz

DAB/D B :AB+ ( AND III) 5A-13F

D : 7.5VC In 0.8A

Battery: x 1.5V AA 4

Designed & Enginee ed in the UK, Made in Chinar

Roberts Radio Ltd,

Stoney Lane, Whiston,

Presco 2Xt, L35 W, UK

READ SAFETY GUIDE

Glen Dimpl Euex rope Ltd,

Airport R ran,oad, Clogh

Co. Dublin, K67 VE08, Ireland

1716

18 D - Scan for DAB stations

Preset radio stations

As time passes new stations may become available or you may have

moved to a different part of the country.

1 Press and release the Mode button until DAB is selected.

2 Press the Auto Tune button.

3 Your radio will perform a scan of the Band III DAB channels. As

new stations are found, they will be added to the list stored in the

radio.

1 Press the On/Off control to switch on the radio. After each use

the radio will remember the mode used and then switch on in that

mode the next time it is used.

2 If this is the rst time the radio is used a scan of the Band III DAB

channels will be carried out.

1 If needed, press and release the button until the DAB mode Mode

is selected.

2 Rotate the control to step through the list of available DAB Tuning

stations.

3 Press the Tuning control to select the station. Adjust the Volume.

4 Some radio stations may have one or more additional broadcasts

associated with them. If these are available they will appear

immediately after the main station.

5 Press the Info button to cycle through the various display options.

The display options are scrolling text, program type, station name,

time, date, channel / frequency, bit rate, audio type and signal

strength (the minimum signal marker ( ) shows the minimum

strength needed for good DAB reception).

Note: All displays except the text display will revert to the clock

display after about 10 seconds.

A - Search tuning - FM

1 Fully extend the telescopic aerial.

2 Press and release the Mode button until FM is selected.

3 Rotate the control clockwise or anti-clockwise and press Tuning

the Auto Tune button. Your radio will scan upwards (low to high

frequency) or downwards (high to low frequency) and will stop

automatically when it nds a station of sufcient strength.

4 If the signal is strong enough and there is RDS data present

then the radio will display the station name. Adjust the Volume.

• Press the Info button to cycle through the various display options.

The display options are station name, scrolling text, program

type, frequency, audio type, time and date.

Note: All displays except the text display will revert to the clock

display after about 10 seconds.

STEP 2 - Play FM radio

Mode

Info/

Dimmer

DAB

Auto

Tune

It is recommended that the DAB band be used wherever possible as better results in terms

of quality and freedom from interference will usually be obtained than on the FM band.

Menu options

1 Press and release the button to access your radio’s Menu

menu system.

2 Rotate the Tuning control to highlight menu options.

3 Press the Tuning control to select menu options.

4 To exit a menu, press the Menu button as needed.

To make it easier for you to tune your radio to the stations that you

prefer, you may store selected radio stations as presets. Your radio

holds presets separately for DAB and FM radio modes.

You may set as many or as few presets as you like in each mode.

You can easily switch between displaying all DAB stations (or all FM

frequencies) and displaying only those that you have set as presets.

Any station or frequency which has been marked as a preset can easily

have the mark cancelled should your preferences or needs change.

Presets are retained when your radio is switched off.

1 To setup your preset stations, tune into the required station.

2 Apply a long press on the Preset button so that the tick symbol

shows in the display. This indicates that the radio station is marked

as a preset. To cancel the preset mark, apply a long press on

the Preset button again. Repeat steps 1 and 2 as needed for

any other stations that you want as presets.

3 To view only the preset stations for the currently selected waveband

when tuning, press and release the button so that the Preset

heart symbol shows in the display.

4 To listen to one of the preset radio stations, rotate the Tuning

control until the required radio station is displayed. The radio will

automatically tune to that station. If needed press .Tuning

5 To cancel the preset stations view, press and release the button so that the heart symbol Preset

disappears from the display. Your radio will then be able to access the full station list using the

Tuning control.

Favourite

Your radio has a favourite button which will automatically select the

required waveband and tune to your favourite radio station.

1 Tune to the required station. Apply a long press on the Favourite

button (for 5 seconds) until the display shows 'SAVED'. To recall

your favourite station, press the Favourite button.

Mode

Auto

Tune

Mode

STEP 3 - Bluetooth

Preset

DAB

1 Ensure Bluetooth is enabled on your smart device.

2 Ensure your radio is switched on.

3 Press and release the button until the Bluetooth mode Mode

is selected on your radio. The Bluetooth indicator will ash and

your radio will show that it is ‘discoverable’.

4 On your smart device select ‘Revival Uno BT’. Once the

connection is established the Bluetooth indicator will remain

steady. You may now play your music. Adjust the volume on

your Bluetooth device or on your radio.

5 The audio player in your smart device may be able to respond

to the Play/Pause, Next or Previous track on the radio. Press

the Tuning control to pause playback. Press the control again to

resume playback. Rotate the control clockwise or anti-clockwise

to skip to the next or previous track. Note: Not all player

applications or devices may respond to all of these controls.

6 To connect a different device on the apply a long press

Menu/Bluetooth Pair button. Your radio will become

discoverable by other devices.

STEP 4 - Setting alarms Other information

Circuit features

ROBERTS RADIO LIMITED

www.robertsradio.com

Issue 1a

2021-06-15

DAB / DAB+ / FM radio with Bluetooth

Please read this guide and the safety/warranty leaet before use

Revival Uno BT

Specications

Power requirements

Mains (Adaptor) AC100 - 240V 50/60Hz

Batteries 4 x AA size / LR6 (not included)

Battery life Up to 25 hours using alkaline cells depending upon

volume, display brightness and operating mode.

Headphone socket 3.5mm stereo, Aux In socket 3.5mm stereo

Line out socket 3.5mm stereo, Aerial System - DAB / FM Telescopic aerial

Bluetooth standards A2DP, AVRCP, Bluetooth codecs supported SBC and AAC

Frequency coverage FM 87.5 - 108MHz, DAB 174.928 - 239.200MHz

Bluetooth 5.0 frequencies 2.402 - 2.480GHz

Bluetooth BLE EIRP POWER (MAX.) 1.92dBm

Product markings DC Power input 7.5V / 0.8A

This symbol indicates AC voltage. This symbol indicates DC voltage.

Mains adaptor

Manufacturer of AC Adaptor: Dongguan Becky Electronics Tech Co.,Ltd , Model:

PU 83, Input voltage: AC100 - 240V, Input AC frequency: 50/60Hz, Output

voltage: DC7.5V, Output current: 0.8A, Output power: 6.0W, Average active

efciency:

78.88%, No-load power consumption: < 0.1W

Please handle with care. The leather-cloth nish may be susceptible to damage

if mistreated. Avoid all contact with any abrasive material, chemical substances

or cleaning solutions. Your radio may be wiped with a clean lightly damp cloth.

Please ensure that the product is unplugged from the mains socket outlet

before attempting this procedure.

Battery operation

1 Remove the battery cover located underneath the radio by applying pressure

to the catch in the direction shown by the arrow and then lifting up the cover.

2 Insert 4 x AA size batteries into the spaces in the compartment. Take care

to ensure all batteries are inserted with the

correct polarity as shown inside the battery

compartment. Replace the battery cover.

3 The low battery indicator lighting, reduced power,

distortion and a ‘stuttering’ sound are all signs

that the batteries may need replacing.

4 If the radio is not to be used for any extended

period of time it is recommended that the

batteries are removed from the radio.

We recommend for economy that the radio is used via the AC adaptor whenever

possible with battery operation for occasional or standby use only.

Caution: Replace batteries only with the same or equivalent type. Danger of

explosion if the batteries are incorrectly replaced.

The name plate is located underneath the radio.

The company reserves the right to amend the specication without notice.

Designed & Engineered in the UK

Made in China

If you wish to completely reset your radio to its initial state perform a factory

reset. Press . Choose . All user entered settings will Menu ‘RESET’ ‘YES’ then

be erased.

A 3.5mm stereo Line out socket located underneath your radio is provided

for connecting the audio signal to an external amplier. Inserting a line out

audio cable will not mute the internal loudspeaker. Set the volume control to

minimum if desired.

The software version display cannot be altered and is just for your reference.

Press Menu. Choose to display the software version.‘SW VERSION’

While the radio is playing, press and then choose Menu. Choose ‘SNOOZE’

the desired snooze time from between 5, 10, 15 and 20 minutes.

The sound on your radio can be adjusted to suit your personal taste for the

material that you are listening to. You may set the treble and bass levels to your

own preferences using the ‘My EQ’ menu.

1 Press Menu. Choose ‘MY EQ’, ‘TREBLE’ then choose the desired level

between (- 4 and + 4). Press .Tuning

2 Choose the desired bass level between (- 4 and + 4).

1 Press Menu. Choose ‘LANGUAGE’ and then choose the desired language

from the list.

DAB / FM menus System settings

Your radio has 2 alarms which can be set to wake you by DAB, FM radio or buzzer alarm. Each alarm can be set to sound, once, daily on weekdays or at weekends.

Alarms can be set with the radio in standby or switched on. Ensure the time is set correctly before setting the alarms. Alarms cannot be used when the radio is powered

from the batteries. Alarms will be retained in the event of a power failure. If no buttons are pressed for 10 seconds, your radio will exit the alarm setup.

1 To change the states of alarms while the radio is in Standby, repeatedly press the Mode/Alarm button. The display

will cycle through No alarm, Alarm 1 enabled, Alarm 2 enabled or Alarm 1 and 2 enabled.

2 To change the detailed alarm settings while the radio is in Standby, on the apply a long press Mode/Alarm button.

This will cause the alarms menu to be displayed. Then skip to step 5 below.

3 To change alarm settings while the radio is switched on, press Menu.

4 Rotate Tuning until ‘ALARM’ .is displayed. Press Tuning

5 Choose ‘ orAlarm 1’ ‘ TuningAlarm 2’. Press .

6 Rotate Tuning to select or ‘ON’ ‘OFF’. If OFF is selected any current setting for that alarm will be cancelled.

7 With 'ON' selected press Tuning.

8 Choose the desired alarm hour then the minute.

9 Choose the desired alarm day option: Daily, Once, Weekdays and Weekends.

10 Choose the desired alarm source (DAB, FM, BUZZER).

If setting the alarms to the radio option, the radio alarm will be set to the last listened radio station.

11 Rotate Tuning to choose the desired alarm volume. The radio uses the saved volume settings for each radio alarm

when it sounds.

12 Press Tuning to conrm the alarm settings. ‘SAVED’ will show on the display before exiting the alarm setup.

13 Alarms are indicated in the display by the alarm 21 symbol and the corresponding alarm number.

The alarm will sound at the selected times for up to 60 minutes unless cancelled. The maximum volume used for the

alarm will be specied during alarm setup. When your radio is set to wake by the radio alarm, your radio will switch

to the selected radio station. If the radio cannot tune to the specied radio station, the buzzer will be used instead.

Note: If the radio is switched on because of a radio alarm you can control basic functions such as the volume.

When the alarm activates it will start softly and gradually increase in level. The alarm icon will ash on the screen and

the radio will automatically switch back to standby mode when the 60 minutes have elapsed.

Press Menu to access the following DAB menu options.

Manual tune - Choose ‘MANUAL’ and then choose the desired DAB channel.

The minimum signal marker ( ) shows the minimum strength needed.

DRC - Choose , ‘DRC’ then choose ‘0’ ‘1/2’ or ‘1’. The DRC facility can make

quieter sounds easier to hear when your radio is used in a noisy environment.

Note: Not all DAB broadcasts use the DRC function.

Prune station - Choose ‘PRUNE’ ‘YES’ and then choose to remove any stations

that are no longer available.

Station order - Choose ‘ORDER’ and then choose ‘NAME’, ‘ACTIVE’ or

‘ENSEMBLE’.

Press Menu to access the following FM menu options.

Scan setting - Choose ‘SCAN’ and then choose either ‘DISTANT’ (your radio

will scan for both weak and strong signals) or ‘LOCAL’ (your radio will scan for

stations with good reception).

Stereo / Mono setting - Your radio will play stereo broadcasts in stereo (via

headphones and line out only) so long as the received signal is of adequate

strength. However, as a stereo signal becomes weaker the audio signal will

become poorer. To reduce any hiss press . Tuning, display shows ‘MONO’

To return to stereo/mono mode press , the display shows Tuning ‘STEREO’.

Cancel alarm

While an alarm is sounding press and release the On/Off control to cancel the alarm.

Snooze

When the radio or buzzer alarm sounds, press Tuning/Select/Snooze control or other buttons on the radio. This will

silence the alarm for the selected number of minutes. The snooze duration can be adjusted between 5 and 20 minutes.

The default setting is 5 minutes. The display will show the snooze symbol. This sequence can be repeated during

the 60 minute alarm period. To cancel snooze press and release the control.On/Off

Automatic clock update - Your radio will usually set the clock time using the DAB

signal. With your radio on, press . Choose Menu ‘TIME’ ‘AUTO’ and then . Choose

from ‘DAB’ or ‘NO (None)’. If you choose none you will need to set the clock manually.

The radio will set its time according to the information received.

Set clock manually - If no DAB signal is available you will need to set the time

manually. With your radio on, press . Choose Menu ‘TIME’ ‘MANUAL’ then . Use

the Tuning control to set the hour, minute, day, month and year.

DAB

Dimmer - Switch off your radio. Press Dimmer and then choose Low,

Medium, High or almost Off setting. When your radio is powered by the

AC mains the display backlight will always be on whenever the radio

is switched on. When using batteries the display will be switched on for approx

12 seconds when any button is pressed. When your radio is in standby pressing

any button (except the dimmer button) or the rotary controls will cause the radio to

switch to the ‘High’ brightness level for a few seconds.

Sleep timer - Your radio can be set to turn off after a preset time (between 10 and

90 minutes) has elapsed. Ensure your radio is switched on. Press Menu. Choose

‘SLEEP’. Set the desired sleep time. The sleep symbol will appear on the

display. Press .On/Off to cancel the sleep timer or set the sleep timer to ‘Off’

Mode

DAB

Info/

Dimmer

Please read the safety leaet provided

before using batteries.

A 3.5mm Headphone socket located on the top left hand corner of your radio

is provided for use with headphones. Inserting a plug automatically mutes the

internal loudspeaker. Please be aware that the sensitivity of headphones can

vary widely. We therefore recommend setting the volume to a low level before

connecting headphones to the radio.

Connect a stereo or mono audio source to the Auxiliary input socket. Press

and release the Mode button until AUX IN mode is selected. Adjust the volume.

Note that audio will be played in mono through the speaker and in stereo

through stereo headphones.

Note: If the unit is in the Bluetooth or Auxiliary input stop mode position for

more than 15 minutes it will automatically switch to the standby mode. To use

the radio again press and release the On/Off control.

Product specificaties

Merk:	Roberts
Categorie:	Radio
Model:	Revival Uno BT

Heb je hulp nodig?

Als je hulp nodig hebt met Roberts Revival Uno BT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Radio Roberts

Roberts Blutune 300L Handleiding

24 November 2024

Roberts Classic DAB Handleiding

15 November 2024

Roberts Rambler Max Handleiding

24 Oktober 2024

Roberts Revival Icon Handleiding

23 Mei 2024

Roberts Revival Petite 2 Handleiding

24 Februari 2024

Roberts Revival Petite Jaune Handleiding

9 Juli 2023

Roberts Revival Petite Bleu C Handleiding

7 Juli 2023

Roberts Classic 996 Handleiding

19 Juni 2023

Roberts Stream 218 Handleiding

18 Juni 2023

Roberts Splash Mini Handleiding

1 Juni 2023

Handleiding Radio

Nieuwste handleidingen voor Radio

Albrecht Tectalk biz Handleiding

16 December 2024

Albrecht Tectalk Easy 3 Handleiding

16 December 2024

Albrecht Tectalk Duo Handleiding

16 December 2024

Pure Classic H4 Handleiding

13 December 2024

Blonder Tongue BIDA 86B-30P Handleiding

10 December 2024

Blonder Tongue BIDA 86B-43P Handleiding

10 December 2024

Blonder Tongue AP-60-860A Handleiding

10 December 2024

Blonder Tongue BIDA 750-30 Handleiding

10 December 2024

Blonder Tongue BIDA 550-30 Handleiding

10 December 2024

Audizio Avola Handleiding

10 December 2024