Roberts Concerto 3 Handleiding

Roberts Radio Concerto 3

Lees hieronder de 📖 handleiding in het Nederlandse voor Roberts Concerto 3 (3 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
1 Carefully, extend the .telescopic aerial
2 Slide the switch to .Function ‘Radio’
3 Slide the switch to .DAB / FM ‘FM’
4 Press and hold down either the Tuning
Up Down or buttons for more than 0.5
seconds to commence scan. An audible
tone will be heard indicating that the radio
is tuning. The tone will increase in pitch for
tuning up and decrease for tuning down.
The audible tone volume can be adjusted
using the Tuning assist volume control on
the right hand side of the unit.
5 You radio will scan the selected waveband,
sound a beep tone and stop automatically
when it nds a station of su󰀩cient strength.
6 Adjust the Volume Tone and controls.
• To reduce any hiss switch to mono mode.
Apply a long press on the Select / FM
mode button to toggle mono / stereo mode.
You may store your preferred DAB and FM radio stations to the preset station memories. Presets are
remembered in the event of a power failure.
To store a station preset
1 Slide the switch to . Function ‘Radio’
2 Slide the switch to or and DAB / FM ‘DAB’ ‘FM’
tune to the required station.
3 Apply a long press on the required Preset
button 1 - 5. The display shows e.g. ‘Preset 1
stored’. A beep will be heard. The station will
be stored under the chosen preset. Stored
presets, maybe overwritten by following the
above procedure.
To recall a station preset
1 Slide the switch to .Function ‘Radio’
2 Slide the switch to or .DAB / FM ‘DAB’ ‘FM’
3 Momentarily, press the required Preset button
1 - 5. Your radio will tune to the station stored
in preset memory.
Radio cassette recorder, mains lead, demo CD, quick start guide and safety/warranty leaet.
Features
continued overleaf...
STEP 1 - Plug in & play DAB radio Manual tune - FM radio
What is in the Box?
B - Play DAB radio
C - Scan for DAB stations
A - Connect to the mains Manual tuning - FM
Preset radio stations - 5 DAB, 5 FM
• DAB / DAB+ / FM wavebands
• CD / USB bookmark remembers last played position
• MP3 / WMA playback via CD and USB
• CD syncro record - one button press starts cassette and CD
• Large easy to read LCD display with zoom function
• High visibility yellow controls
Please read the safety leaet provided before connecting your unit to the mains.
1 Place your CD radio cassette recorder on
a at surface.
2 Plug the mains lead into the mains power
socket ensuring that the plug is pushed
fully into the socket.
3 Plug the other end of the mains lead into
a wall socket and switch on the socket.
The mains LED will light and the clock
will set.
1 Carefully, fully extend then angle the
telescopic aerial.
2 Slide the switch to the Function ‘Radio’
position. To switch o󰀨 slide to ‘O’.
3 Slide the switch to .DAB / FM ‘DAB’
If this is the îš¿rst time the radio is used a
scan of the Band III DAB channels will
be carried out. If the radio is used before
the last used station will be selected. If
no signals are found it may be necessary
to relocate your unit to a position giving
better reception.
4 Press the buttons to Tuning Up or Down
scroll through the list of available stations.
5 Press the button to tune to the Select
chosen station. Adjust the .Volume
• Some radio stations may have one or more additional broadcasts associated with them. If
these are available they will appear immediately after the main station.
As time passes new stations may become available. To îš¿nd new stations proceed as follows:
1 Apply a long press on the Local Scan
button. The display will show ‘Scanning’.
2 To carry out a full scan, apply a long press
on the button. The display will Full Scan
show .‘Scanning’
• As new radio stations are found the station
counter will increase and the radio stations
will be added to the list stored in the radio.
Tone control1
Preset buttons 1 - 52
Internal microphone3
External mic socket4
Function switch5
Mains socket6
Volume control7
Battery compartment8
9 Telescopic aerial
10 USB socket
11 Tuning assist volume control
12 DAB / FM switch
13 Track / Search Up button
14 Track / Search Down button
15 Play / Pause button
16 Stop / Tuner Reset button
17 Repeat / Intro button
18 Raised lip for CD access
19 Record key
20 Play key
21 Rewind key
22 Fastforward key
23 Stop / Eject key
24 Zoom button
25 LCD display
26 Tuning / Album up / local
scan button
27 Tuning / Album down / full
scan button
28 Select / FM mode button
29 Cassette door
30 Headphone socket
31 Mains indicator light
ON
Controls
Zoom Tuning
Album
Album
Tuning
Full
Scan
Local
Scan
Select / FM mode
Mains
24 25
26
2829
30
31 27
• Audible tone to conrm station found
and preset memory
• 10 one touch station presets
• Rotory volume and tone control
• Ext mic and headphone sockets
• AC mains socket
• Batteries 8 x C size (LR14) not included
S
t
o
p
/
E
j
e
c
t
Concerto 3
USB
USBCD
Off /
Tape Radio
VOLUME
Tone
Preset Stations
Ext. Mic
Mic
Min. Max .
Min. Max.
DAB FM
Up
Track / Search
Down
Repeat Stop /
Tuner Reset
Play / Pause
F
.
F
o
r
w
a
r
d
R
e
c
o
r
d
P
l
a
y
R
e
w
i
n
d
6
7
8 9
10
11
12
13
14
17 151618
19
202122
1
2
3
5
4
23
USBCD
Off /
Tape Radio
DAB FM
Tuning
Album
Album
Tuning
Full
Scan
Local
Scan
Select / FM mode
STEP 2 - Play FM radio
STEP 3 - Compact discs
VOLUME
Min. Max .
Tone
Min. Max.
Tuning
Album
Album
Tuning
Full
Scan
Local
Scan
Tuning Assist Volume
1 Carefully, fully extend then angle the
telescopic aerial.
2 Slide the switch to the Function ‘Radio’
position.
3 Slide the switch to .DAB / FM ‘FM’
4 Press the buttons to Tuning Up or Down
tune to a station. The frequency will change
in steps of 50kHz.
5 Adjust the Volume Tone and controls.
It is recommended that the DAB band be used
wherever possible as better results in terms
of quality and freedom from interference will
usually be obtained than on the FM band.
Use only Digital Audio CDs which have the symbol.
Never write on a CD or attach any sticker to the CD.
Always hold the CD at the edge and store it in its box
after use with the label facing up.
To remove dust and dirt, breathe on the CD and wipe it with a soft,
lint-free cloth in a straight line from the centre towards the edge.
Cleaning agents may damage the CD. Do not expose the CD to rain, moisture, sand, or to excessive
heat. (e.g. from heating equipment or in motor cars parked in the sun).
Your CD player can playback CD-DA format audio CD-R/CD-RW discs that have been îš¿nalised* upon
completion of recording. Your CD player may fail to playback some CD-R/CD-RW discs due to poor
recording of the CD-R/CD-RW disc.*Finalising enables a CD-R/CD-RW disc to playback on audio CD
players such as your Concerto 3.
CLASS 1 LASER PRODUCT means that the laser's construction makes it
inherently safe so that the legally prescribed maximum permissible radiation
values can never be exceeded. Using any equipment or devices other Caution:
than those described and speciîš¿ed in these operating instructions, or tampering
with the unit in any way, can result in dangerous exposure to radiation.
For operation of your CD player please see overleaf.
The Concerto 3 is able to play CD-R and CD-RW discs containing MP3 or WMA îš¿les. The CD cassette
recorder reads MP3 and WMA îš¿les with a maximum of 255 îš¿les per folder. An MP3 or WMA CD may
not contain more than 512 îš¿les or albums in total. MP3 or WMA îš¿les must be created with an audio
sample rate of 44.1kHz (this is normal for îš¿les created from CD audio content). Both MP3 and WMA
îš¿les may be recorded on to the same media.
When you are making audio CDs, observe all legal guidelines and ensure that the copyright of third
parties is not infringed.
Tuning
Album
Album
Tuning
Full
Scan
Local
Scan
USBCD
Off /
Tape Radio
DAB FM
Select / FM mode
DAB FM
USBCD
Off /
Tape Radio
Tuning
Album
Album
Tuning
Full
Scan
Local
Scan
VOLUME
Min. Max .
Tone
Min. Max.
Preset Stations
DAB FM
USBCD
Off /
Tape Radio
ROBERTS RADIO LIMITED
www.robertsradio.com
© 2021 Roberts Radio Limited
STEP 3 cont. - Play CD / CD MP3 / WMA discs
STEP 4 - Play USB / Cassette tapes / Recording
Other information
Speciîš¿cations
Headphone socket
Issue 1
2021-12-20
Battery operation
B - Playing a CD
Power requirements
Mains 230V 50Hz only
Batteries 8 x C size / LR14 (not included)
Battery life 25 hours in CD playback mode (4 hours per day)
Circuit features
Headphone socket 3.5mm dia.
Microphone socket 3.5mm dia.
Aerial system FM / DAB Telescopic aerial
Frequency coverage FM 87.5-108MHz, DAB 174.928 - 239.200MHz
Product markings
This symbol indicates AC voltage.
This symbol indicates DC voltage.
The name plate is located on the underside of the unit.
The company reserves the right to amend the speciîš¿cation without notice.
Designed & Engineered in the UK
Made in China
A 3.5mm is provided for use with headphones. Inserting Headphone socket
a plug automatically mutes the internal loudspeakers. Please be aware that
the sensitivity of headphones can vary widely. We therefore recommend
setting the volume to a low level before connecting headphones.
BWBF DAB/FM/CD/USB Cassette Recorder
Concerto 3
Please read this guide and the safety/warranty leaet before use
A - Inserting a CD
1 To open the CD compartment, position a îš¿nger underneath the raised lip and lift up the CD door.
2 Put the CD on the spindle, print side facing upwards until it clicks into place. Gently close the CD
compartment by pushing the cd door back into position.
1 Slide the switch to the .The CD player will scan the contents Function 'CD' position
of the CD, will appear on the display.‘READING’
2 Press the button to start playback and adjust the Play/Pause Volume.
3 To pause or continue playback press the button.Play/Pause
4 To stop playback, press the button.Stop
The CD door should only be opened when the CD is in stop mode.Note:
Your CD radio cassette recorder can access and playback your audio îš¿les via USB memory devices.
The Concerto 3 has been tested with a range of USB memory devices up to 16GB. Memory must use
the FAT or FAT 32 îš¿ling system in order to operate in the Concerto 3. : Your radio cassette Important
player is designed to work with USB ash memory devices. It is not intended to be connected to hard
disk drives or any other type of USB device. Audio formats supported on USB memory devices are
MP3 and WMA. Playback does not support îš¿les encoded using WMA lossless, WMA voice, WMA 10
professional, nor îš¿les of any format which have DRM protection.
The USB socket is located on the top right hand side of the unit. Carefully insert a USB memory device
into the USB socket. To remove the USB memory device simply pull the device out.
Cautions
In order to minimise the risk of damage to your unit, or USB memory
device, please place the unit so that the device cannot be easily
knocked while it is inserted in the socket.
Remove the USB memory device before carrying the unit or if not
using the USB feature for a prolonged period. The USB memory Note:
device should not be removed during playback as damage or corruption
of îš¿les may occur.
Note: If the unit is in the CD or USB stop mode position for more than
15 minutes it will automatically switch to the standby mode. To use the
unit again switch on the unit.
Cassette tapes
USB mode Recording
1 Slide the switch to .Function 'USB'
Note: Playback control in USB mode is similar to
CD-MP3 / WMA mode (see above). Files are played
back in the order that they are written to the USB
memory device by your computer.
Note: This unit is not suitable for recording onto CHROME (IECII) or METAL
(IEC IV) cassettes. For playback any cassette type may be used.
1 Slide the switch to the Function Tape position.
2 Press the key to open the Cassette compartment.Stop/Eject
3 Insert a pre-recorded cassette tape with the tape surface upwards and the
side with the desired recording facing towards you. Close the compartment.
4 Depress the key and adjust the Play Volume Tone and controls.
5 Use the or Fastforward Rewind keys to locate a speciîš¿c part of the tape.
To stop the tape press the key.Stop/Eject
System reset
Cleaning tape heads
Zoom function
If your CD radio cassette fails to operate correctly, or
some digits on the display are missing or incomplete,
carry out the following procedure.
1 Slide the switch to the position.Function ‘Radio’
2 Slide the switch to the DAB position.DAB / FM
3 Press and hold the button Stop/Tuner Reset
to select system reset.
A full reset will be performed and the station list
together with any preset stations will be erased.
The oxide from magnetic tapes can accumulate on the pinch roller (A) the
capstan shaft (B) and also the heads (C and D). This will impair the sound
quality. To clean these parts proceed as follows:
1 Switch o󰀨 the power to the unit.
2 Press the key.Stop/Eject
3 Press the key and the heads Play
will be clearly seen.
4 Clean the surfaces (A, B, C, D) with
a lint free rag or cotton swab soaked
in alcohol. Press the Stop/Eject key
as soon as cleaning is over.
Please read the safety leaet provided
before using batteries.
1 Remove the Battery cover on the rear of
the unit. Push the catches in the direction
shown.
2 Insert eight LR14 (C size) batteries into
the spaces in the compartment. Take care to ensure all batteries
are inserted with the correct polarity as shown inside the battery
compartment. Replace the battery cover.
3 Reduced power, distortion and a 'stuttering' sound are all signs that
the batteries may need replacing. If the unit is not to be used for any
extended period of time, it is recommended that the batteries are
removed. We would recommend for economy that the Concerto 3
is used on the mains whenever possible with battery operation for
occasional or stand-by use only.
S
t
o
p
/
E
j
e
c
t
Concerto 3
USBCD
O ff /
Tape R adio
VOLUME
Tone
Preset Stations
Ext. Mic
Mic
Min. Max .
Min. Max.
DAB FM
Up
Track / Search
Down
Repeat Stop /
Tuner Reset
Play / Pause
F
.
F
o
r
w
a
r
d
P
l
a
y
R
e
w
i
n
d
C - Selecting a track
1 Audio CD: While the CD is playing, press either the Track
Up Down or buttons to change the desired track. You can
also skip to a track when the player is in stop mode. Press
Play/Pause.
2 MP3 / WMA CD: While the CD is playing, press either
the Album + - or buttons to change to the desired album/
folder, then press to change to Track Up or Down buttons
the desired track. You can also skip tracks when the player
is in stop mode. Press .Play/Pause
3 To search to the desired part of the track, give a long press
on the or buttons. Track/Search Up Down
Repeat -To access the repeat
options (repeat a track, all tracks
or repeat album when playing
MP3 / WMA îš¿les) whilst the unit is
playing, press the button Repeat
as required.
Intro - When the CD is in stop mode,
press the button to play Repeat
the îš¿rst 10 seconds of each of the
tracks on the disc. To cancel, press
Repeat.
CD Bookmark
The CD Bookmark feature allows you to stop the playback of a CD and then to continue playback from the same point
at a later time. Even if you change the function, the next CD play operation will start from the point where playback was
previously stopped. Note that if mains power is removed and restored the Bookmark setting will be cancelled and the
CD will then play from the beginning. When the CD is playing, press button once. The display will show resume. Stop
You can then select an alternative function. If you wish to cancel the Bookmark function, either press the Stop button
a second time when the radio is in CD mode or simply take out the CD.
USBCD
Off /
Tape Radio
Play / Pause
Play / Pause
Stop /
Tuner Reset
Stop /
Tuner Reset
Up
Track / Search
Down
Up
Track / Search
Down
Tuning
Album
Album
Tuning
Full
Scan
Local
Scan
Repeat
Repeat
S
t
o
p
/
E
j
e
c
t
Concerto 3
USB
USBCD
O ff /
Tape Radio
VOLUME
Tone
Preset Stations
Ext. Mic
Mic
Min. Max .
Min. Max.
DAB FM
Up
Track / Se arch
Dow n
Repe at Stop /
Tune r Reset
Play / Pause
F
.
F
o
r
w
a
r
d
R
e
c
o
r
d
P
l
a
y
R
e
w
i
n
d
USBCD
Off /
Tape Radio
S
t
o
p
/
E
j
e
c
t
F
.
F
o
r
w
a
r
d
R
e
c
o
r
d
P
l
a
y
R
e
w
i
n
d
S
t
o
p
/
E
j
e
c
t
F
.
F
o
r
w
a
r
d
R
e
c
o
r
d
P
l
a
y
R
e
w
i
n
d
Record from radio
Slide the switch to the position and tune into the desired station. Adjust Function ‘Radio’
the volume. Insert a blank tape. Depress key. The recording level is automatic Record
and is not a󰀨ected by the volume control. To stop recording press the Stop/Eject key.
Record from CD
Slide the switch to the position. Insert a CD into the compartment. Insert Function ‘CD’
a blank tape. Depress key. The CD will start automatically (CD syncro start). Record
To stop recording press the key.Stop/Eject
Record from USB
Slide the switch to the position. Insert a USB memory device into the Function ‘USB’
USB socket. Insert a blank tape. Depress key. The USB will start automatically Record
(USB syncro start). To stop recording press the key.Stop/Eject
Recording from the internal microphone
Slide the switch to the Function ‘Tape’ position. Insert a blank tape. Depress Record
key. To stop recording press the key.Stop/Eject
Recording from an external microphone (not included)
When recording from an external microphone the loudspeakers remain connected
for monitoring purposes. If you do not wish to hear the recording being made simply
rotate the volume control to minimum. The recording level is set automatically and is
not a󰀨ected by the setting of the Volume control.
Slide the switch to the Function ‘Tape’ position. Insert a blank tape. Plug the external
microphone into the Microphone socket. The internal microphone will be automatically
disconnected. Depress key. To stop recording press the key.Record Stop/Eject
To safeguard your recordings against accidental erasure, break o󰀨
the appropriate tab on the cassette. There is one tab for each side of
the cassette. This will prevent the Record button from being pressed.
To restore the cassette to normal, seal the tab openings with a small
piece of self-adhesive tape.
Your CD radio cassette recorder has a zoom button which can be used to
enlarge the size of fonts on the display. Press the button to enlarge Zoom
the upper line of the display. Press the button again to enlarge the Zoom
lower line. Press the button once more to return to the normal display.Zoom
Zoom
USBCD
Off /
Tape Radio
Stop /
Tuner Reset
USBCD
Off /
Tape Radio
DAB FM

Product specificaties

Merk: Roberts
Categorie: Radio
Model: Concerto 3

Heb je hulp nodig?

Als je hulp nodig hebt met Roberts Concerto 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Radio Roberts

Roberts

Roberts Blutune 300L Handleiding

24 November 2024
Roberts

Roberts Classic DAB Handleiding

15 November 2024
Roberts

Roberts Rambler Max Handleiding

24 Oktober 2024
Roberts

Roberts Revival Icon Handleiding

23 Mei 2024
Roberts

Roberts Revival Petite 2 Handleiding

24 Februari 2024
Roberts

Roberts Revival Petite Jaune Handleiding

9 Juli 2023
Roberts

Roberts Revival Petite Bleu C Handleiding

7 Juli 2023
Roberts

Roberts Classic 996 Handleiding

19 Juni 2023
Roberts

Roberts Stream 218 Handleiding

18 Juni 2023
Roberts

Roberts Splash Mini Handleiding

1 Juni 2023

Handleiding Radio

Nieuwste handleidingen voor Radio

Albrecht

Albrecht Tectalk biz Handleiding

16 December 2024
Albrecht

Albrecht Tectalk Easy 3 Handleiding

16 December 2024
Albrecht

Albrecht Tectalk Duo Handleiding

16 December 2024
Pure

Pure Classic H4 Handleiding

13 December 2024
Blonder Tongue

Blonder Tongue BIDA 86B-30P Handleiding

10 December 2024
Blonder Tongue

Blonder Tongue BIDA 86B-43P Handleiding

10 December 2024
Blonder Tongue

Blonder Tongue AP-60-860A Handleiding

10 December 2024
Blonder Tongue

Blonder Tongue BIDA 750-30 Handleiding

10 December 2024
Blonder Tongue

Blonder Tongue BIDA 550-30 Handleiding

10 December 2024
Audizio

Audizio Avola Handleiding

10 December 2024