Rexel LV340HS Handleiding
Rexel
Lamineersysteem
LV340HS
Lees hieronder de 📖 handleiding in het Nederlandse voor Rexel LV340HS (21 pagina's) in de categorie Lamineersysteem. Deze handleiding was nuttig voor 71 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/21
LV250HS and LV340HS
Personal Laminator
GB
F
D
I
NL
E
P
RUS
PL
S
DK
SF
Operating Instructions
Mode d'emploi
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Instrucciones de funcionamiento
Instruções de Utilização
Инстр кции по +кспл атацииy y
Instrukcja Obs ugił
Bruksanvisning
Brugsanvisning
Käyttöohjeet
Bruksanvisning
Üzemeltetési utasítások
Provozní pokyny
√‰ËÁ›Â˜ ¯Ú‹Û˘
NO
H
CZ
G
LV250_340HS_UserGuide.qxd 2/20/03 10:50 AM Page 16
F
1
23
4 5
G
A
B
C
D
E
H
LV250_340HS_UserGuide.qxd 2/20/03 10:50 AM Page 17
Operating Instructions
LV 250HS (A4) LV 340HS (A3)
A. Power Switch
B. ‘On’ light
C. ‘Ready’ light
D. Pouch/temperature setting
E. Entry Slot
F. Entry Guides
G. Exit slot
H. Release button
IMPORTANT SAFEGUARDS
When using electrical appliances, basic precautions
should always be followed to reduce the risk of
electric shock and injury, including the following:
1. Carefully read all instructions
2. Always unplug the appliance when not in use or
before cleaning.
3. Extreme caution to be taken when appliance is
used by, or near to, children or invalids.
4. To protect against risk of electrical hazards, do
not immerse power cord, plug, or appliance in
water or other liquids.
5. Do not insert any metal objects, e.g. scissors, or
foreign objects into the entry or exit areas of the
machine. Do not laminate metallic objects.
6. Do not operate the appliance with a damaged
power cord or plug, or after the appliance
malfunctions, has been dropped or is damaged
in any manner.
7. The plug on the power cord is the disconnect
device.
8. The equipment should be installed near the
outlet socket and the socket should be easily
accessible.
OPERATION
Before you use your LV Laminating machine for the
first time, it is recommended that you familiarise
yourself with the machine’s operation and controls.
Check the results using a range of sample sheets of
paper before laminating your valuable original
documents.
IMPORTANT
1. It is important that you do not use a Carrier with
this machine. This can result in the laminator
becoming jammed or failing to run. This is an
operator fault and is not covered by a
manufacturer’s war . (A carrier is made fromranty
folded card and is supplied with most packs of
pouches).
2. Do not attempt to laminate items which are too
thick for your laminator i.e. the total thickness
including the pouch must not exceed 0.8mm.
HOT LAMINATING
1. Plug the laminator into a convenient power
socket
2. Switch on the power switch ( I ) , the Red light
will illuminate to indicate that the power is on
3. Select the appropriate temperature/pouch
setting for the thickness of pouch.
4. The laminator will pre-heat for approximately 4-5
minutes.
5. Whilst the laminator is pre heating, you can
prepare your item to be laminated by placing it
centrally into the correct sized pouch, leaving
the sealed edge intact.
6. When the required temperature is reached the
Green light will come on.
7. Gently insert the pouch, sealed edge first,
squarely between the entry guides into the front
of the laminator until it engages with automatic
feed rollers.
8. The pouch will move through the unit and exit at
rear.
9. During the laminating process the Green light
may go off as heat is absorbed by the laminate.
Always wait until the Green light is on before
laminating your next document.
10. Always turn your laminator OFF after use. ( O )
RELEASE FUNCTION
CAUTION: Do not try to force the pouch into
the laminator or try to pull the pouch out. This will
damage (and could break) the laminator as well as
not allowing for proper processing of the laminating
pouch.
There is a release button at the back on the left side
of the machine (H). IF you need to retrieve a
document during lamination:
1. Stop the machine by turning the power off (O).
2. Press the release button and hold it down.
3. With the other hand gently pull the pouch and
document out of the front of the machine.
4. If the pouch has gone completely into the
machine and is not sticking out of the front or
back, there is nothing you can do. Do not try to
open the machine. This can be dangerous and
will invalidate the warranty.
PHOTO LAMINATING
1. Your Rexel LV Laminator will laminate
photographs without the need for special
pouches. Photographs have a sealed plastic
surface that can produce disappointing results
on some laminators as the adhesive will show
as bubbles on the surface of the photograph.
2. Heavily coloured inkjet copies and varnished
printed pages will also have excellent results on
this laminator with standard pouches.
COLD LAMINATING
1. Select cold setting on the temperature dial.
2. Use ‘cold’ or ‘self-seal’ pouches
3. Remember, when the machine is cold the
temperature is correct to process ‘cold’ or ‘self-
seal’ pouches. The green ready light does not
illuminate for the cold setting.
CAUTION: Remember if you have been hot
laminating and then wish to Cold laminate the
machine will have to cool for at least 1 hour before
laminating can commence. Never use ‘self-seal’
pouches on a hot setting, as they will be spoilt along
with the document inside.
HELPFUL HINTS
1. The hot lamination process achieves the
required result by bonding into the surface of
your document. Once you have laminated your
document it cannot be retrieved.
2. Do not attempt to hot laminate heat sensitive
documents such as thermal paper, wax based
inks etc.
3. If the laminated document has a milky
appearance, you may need to process it again
at a higher temperature.
4. If the laminated document is ridged and hard it
has probably been laminated too hot, and you
should put other laminates through at a lower
setting.
5. If in doubt, start at a lower temperature and if
the laminate does not bond to the document
(appears cloudy) then repeat using a higher
temperature.
6. If air pockets develop during processing, use a
small sharp needle or pin to gently puncture
pockets and process again.
7. Do not handle the inside of the laminating pouch
moisture from your hands could impair the
processing quality.
CARE AND CLEANING
This personal laminator is for low volume use only.
No servicing other than external cleaning should be
performed on the machine. Do not immerse in
water.
To reduce risk of electric shock, do not remove
the base.
• Never clean with scouring powders or hand
implements.
• Wipe clean with a soft cloth
SERVICE AND REPAIRS
Do not attempt to repair the machine yourself
as there are no serviceable components within
the machine.
Never open up the machine
Repair should only be carried out by an
authorised service representative.
TECHNICAL SPECIFICATION
WARRANTY
This machine is guaranteed for 24 months from the
date of purchase – Rexel will repair or replace the
laminator at their discretion.
This does not affect your statutory rights.
Please contact your supplier if you experience any
problems.
Technical Specifications
Model LV250HS LV350HS
Maximum Pouch Size A4 /9" A3 / 12"
Minimum Pouch Size Credit card size (54x86mm)
Maximum Pouch Pouch sizes up to A7 =
Thickness 2 x 180 (360) micron
Maximum Pouch Pouch sizes above A7 =
Thickness 2 x 125 (250) micron
Power Supply 230V 115V 230V 115V
50Hz 60Hz 50Hz 60Hz
Maximum Power 350W 300W 450W 300W
Consumption
Weight 2.94Kg 3.7Kg
Packed Weight 3.59Kg 4.45Kg
GB
LV250_340HS_UserGuide.qxd 2/20/03 10:50 AM Page 18
Product specificaties
| Merk: | Rexel |
| Categorie: | Lamineersysteem |
| Model: | LV340HS |
Heb je hulp nodig?
Als je hulp nodig hebt met Rexel LV340HS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lamineersysteem Rexel
21 Februari 2023
13 Februari 2023
20 Oktober 2022
Handleiding Lamineersysteem
- Lamineersysteem Quigg
- Lamineersysteem Brother
- Lamineersysteem DESQ
- Lamineersysteem Ednet
- Lamineersysteem Fellowes
- Lamineersysteem GBC
- Lamineersysteem Hama
- Lamineersysteem Hema
- Lamineersysteem Konig
- Lamineersysteem Leitz
- Lamineersysteem Lervia
- Lamineersysteem Marquant
- Lamineersysteem Nedis
- Lamineersysteem Powerfix
- Lamineersysteem Renkforce
- Lamineersysteem Royal Sovereign
- Lamineersysteem Sencor
- Lamineersysteem United Office
- Lamineersysteem Olympia
- Lamineersysteem Exibel
- Lamineersysteem Tracer
- Lamineersysteem Genie
- Lamineersysteem Aurora
- Lamineersysteem Q-CONNECT
- Lamineersysteem Pavo
- Lamineersysteem Peach
- Lamineersysteem GFP
- Lamineersysteem SEAL
Nieuwste handleidingen voor Lamineersysteem
5 November 2024
5 November 2024
20 Oktober 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
2 Juli 2024
16 April 2024