Reloop Mixon 4 Handleiding

Reloop DJ Gear Mixon 4

Lees hieronder de 📖 handleiding in het Nederlandse voor Reloop Mixon 4 (36 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 77 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36

Congratulations on purchasing the Reloop Mixon 4. Thank you for placing your trust in our disc jockey technology. Before operating this equipment we ask you to carefully

study and follow all instructions.

Please remove the Reloop Mixon 4 from its packaging. Before initial operation please make sure that the device has not been visibly damaged during transport. If you detect any damage to

the power cable or the casing, do not operate the device and contact your specialised dealer.

SAFETY INSTRUCTIONS

CAUTION! Please exercise particular caution when handling AC 100 - 240 V, 60/50Hz power voltage. This voltage rating may lead to a critical electrical shock! Any damage

caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage to property or for personal injury

caused by improper handling or non-observance of the safety instructions.

• This device has left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation the user must observe the safety instructions and warnings contained in

this operation manual.

• For reasons of safety and certication (CE) the unauthorised conversion and/or modication of the device is prohibited. Please note that in the event of damage caused by the manual

modication to this device any warranty claims are excluded.

• The inside of the device does not contain any parts which require maintenance, with the exception of wear parts that can be exchanged from the outside. Only qualied staff must carry out

maintenance, otherwise warranty does not apply!

• The fuse must exclusively be exchanged against fuses of the same class, with the same trigger features and nominal current rating.

• Make sure that the power will only be supplied after the device has been fully set up. Always plug in the mains plug last. Ensure that the mains switch is in the “OFF” position when connecting

the device to power.

• Only use cables that comply with regulations. Make sure that all jacks and bushes are tightened and correctly hooked up. Refer to your dealer if you have any questions.

• Ensure that when setting up the product the mains cable is not squashed or damaged by sharp edges.

• Prevent the mains cable from coming into contact with other cables! Exercise great care when handling mains cables and connections. Never touch these parts with wet hands!

• Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to be used is a supply outlet in accordance with specications of the public supply network.

• Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to hold the mains plug by the body. Never pull the mains cord!

• Position the device on a horizontal and stable low-ame base.

• Avoid any concussions or violent impact when installing or operating the device.

• When selecting the location of installation make sure that the device is not exposed to excessive heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your

own safety and that of others!

• Do not rest any containers lled with liquid that could easily spill onto the device or in its immediate vicinity. If, however, uids should access the inside of the device, immediately disconnect

the mains plug. Have the device checked by a qualied service technician before re-use. Damage caused by uids inside the device is excluded from the warranty.

• Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device away from direct exposure to the sun and heat sources such

as radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or vents. Always ensure sufcient ventilation.

• The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused hereby may destroy your device. Do not switch on or operate

the device until it has reached ambient temperature!

• Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cleaned with a damp cloth. Never use solvents or cleaning uids

with a petroleum base for cleaning.

• When relocating, the device should be transported in its original packaging.

• Devices supplied by voltage should not be left in the hands of children. Please exercise particular care when in the presence of children.

• At commercial facilities the regulations for the prevention of accidents as stipulated by the organization of professional associations must be observed.

• At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibility by trained staff.

• Keep this operation manual in a safe place for later reference in the event of questions or problems.

APPLICATION IN ACCORDANCE WITH REGULATIONS

• This device is a professional DJ MIDI controller with integrated 4-channel soundcard that can control software. The device should be connected via USB cable to a computer or via iOS

Connection cable to the iPad / iPhone.

• This product is authorised for connection to 100 - 240 V, 60/50 Hz AC via mains adapter (included) and is designed exclusively for indoor application.

• If the device is used for any other purposes than those described in the operation manual, damage can be caused to the product, leading to exclusion of warranty rights. Moreover, any other

application that does not comply with the specied purpose harbours risks such as short circuit, re, electrical shock, etc.

• The serial number determined by the manufacturer must never be removed to uphold the warranty rights.

MAINTENANCE

• Check the technical safety of the device regularly for damage to the mains cord or the casing, as well as for wearout of wear parts such as rotary knobs and sliding faders.

• If it is to be assumed that a safe operation is no longer feasible, then the device must be disconnected and secured against accidental use. Always disconnect the mains plug from the outlet!

• It must be assumed that a safe operation is no longer feasible, if the device bears visible defects, if the device no longer functions, following longer storage under unfavourable conditions

or after major transport stress.

INDEX

02............... SAFETY INSTRUCTIONS

02............... APPLICATION IN ACCORDANCE WITH REGULATIONS

02............... MAINTENANCE

03............... SCOPE OF DELIVERY

03............... SETUP AND CONNECTIONS

04............... HOW TO INSTALL SERATO DJ ON MAC OS X

04............... HOW TO INSTALL SERATO DJ ON WINDOWS

04............... DJAY PRO / DJAY2 (IPAD / IPHONE) INSTALLATION

04............... DJAY 2 (ANDROID) INSTALLATION

05............... FEATURES

09............... MINIMUM SYSTEM REQUIREMENTS

09............... TECHNICAL SPECIFICATIONS

SCOPE OF DELIVERY

- Mixon 4 controller

- Power supply unit

- USB cable

- iOS connection cable

- OTG USB cable

SETUP AND CONNECTIONS

1. Connect your output devices (headphones, speakers, etc.) to the Mixon 4. Audio output takes place via the master output (XLR and RCA) and the booth output.

2. Connect your input devices (microphone) to the Mixon 4. The microphone input takes place directly on the master channel.

3. Make sure that the Mixon is turned off and that the master and booth faders are in the 'min' position.

4. Connect all devices to a power outlet and turn them all on.

5. If you wish to use the Mixon 4 with Serato, please refer to the installation instruction further below for your next steps. If you wish to use djay, please also refer to the installation instruction

further below for your next steps.

Master PA / Active Speakers

MIC

Headphones

6.3 mm jack

3.5 mm jack

XLR

RCA

USBUSB

PSU

PC / MAC

Lightning

OTG

1/4 Jack

Active DJ Monitors iOS Devices Android Devices

HiFi Stereo System / Powered Loudspeakers

Product specificaties

Merk:	Reloop
Categorie:	DJ Gear
Model:	Mixon 4
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	5300 g
Breedte:	657 mm
Diepte:	376 mm
Hoogte:	45 mm
Stroom:	3 A
USB-poort:	Ja
Type aansluitplug:	3.5 mm/6.35 mm
Meegeleverde kabels:	AC, Lightning, USB
Inclusief AC-adapter:	Ja
Microfoon, line-in ingang:	Ja
Hoofdtelefoonuitgangen:	2
Aantal USB-aansluitingen:	1
Ingangsspanning:	12 V
Ondersteunt Windows:	Windows 10, Windows 7, Windows 8.1
Soort voeding:	DC
Backlight toetsen:	Ja
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.9 Mavericks
Mac-compatibiliteit:	Ja
Minimale opslag schijfruimte:	5000 MB
Minimale processor:	32 bit/64 bit: i3 / i5 / i7
Apple docking:	Ja
USB direct afspelen:	Ja
Microfoonaansluiting:	6,3 mm
Aantal microfooningangen:	1
Aantal scratcher-platters:	2
Mixersectie:	Ja
Aantal mixerkanalen:	4 kanalen
RAM minimum:	4 GB
Master (L, R) out:	1
Minimum display resolutie vereiste:	1280 x 720 Pixels
Minimale processorsnelheid:	1.07 GHz
Aantal drumpads:	8
Master (XLR) uit:	1
Achtergrondverlichting drumpads:	Ja
Type scratcher:	Digital Vinyl System (DVS)-scratcher
Achtergrondverlichting platter:	Ja