Quoizel Purcell PCPU8632C Handleiding

Quoizel Verlichting Purcell PCPU8632C

Lees hieronder de 📖 handleiding in het Nederlandse voor Quoizel Purcell PCPU8632C (2 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Package Contents
1of2
For Style PCPU8632C
Please go to for product cleaning tips. Go to the selection.
(4) G9 Clear Xenon Bulbs 40W Maximum, bulbs not included.
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.
www.quoizel.com Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Fixture Body
x 1
E
STEP 2 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Installation Guide #IS-PCPU8632C
2019 QuoizelInc. ReleasedDate:2019-01-22
visit us on-line at www.quoizel.com
Mounting Screw
x 4
B
Glass Shade
x 4
D
(Step 2 Continued)
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 3
STEP 3 -Install the Fixture Body
A. Place the backplate of the Fixture Body (D) onto the Inner
Backplate (A) and secure with Mounting Screws (B). Tighten until
snug with screwdrivers.
Backplate
B
D
A
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Do not touch the bulb with bare hands use a cloth or glove.
Side Rod
x 12
C
FCrystal
x 4 bags
AInner Backplate
x 1
G
G
G
GG
N
N
N
NN
D
D
D
DD
Figure 1
STEP 1 -Install the Inner Backplate to the outlet box
A. Place the supply wires and ground wire through the Inner
Backplate (A). Attach the Inner Backplate (A) to the outlet box with
the head of the green ground screw facing you. Secure it with
outlet box screws (not included). Tighten until snug with
screwdrivers.
Outlet Box Outlet Box Screw
(not included)
Supply Wires
with Ground Wire
A
Green Ground Screw
G
G
G
GG
N
N
N
NN
D
D
D
DD
2of2
2019 QuoizelInc. ReleasedDate:2019-01-22
visit us on-line at www.quoizel.com
PCPU8632C
FINISH: POLISHED CHROME
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible materials.
4.75”
7”
4” Dia.
5.75" 4.75"
2.5”
6”
Figure 4
STEP 4 -Install Bulb, Glass Shade and Crystals
A. Insert bulbs onto sockets and push snugly into
properly.
B. Place the Glass Shade (E) over the sockets and
align holes on the Glass Shade (E) to mounting
holes on the glass holder. Secure by threading
Side Rods (C) onto mounting holes on the glass
holders. Hand tighten until snug.
C. Place one bag of Crystals (F) in each Glass
Shade (E).
Your fixture is now assembled and ready to use.
Enjoy!
Socket
G9 Clear Xenon Bulb
(not included)
CE
F
Glass Holder
G
G
G
GG
N
N
N
NN
D
D
D
DD
32”

Product specificaties

Merk: Quoizel
Categorie: Verlichting
Model: Purcell PCPU8632C

Heb je hulp nodig?

Als je hulp nodig hebt met Quoizel Purcell PCPU8632C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Quoizel

Quoizel

Quoizel Lansdowne LANS8618MBK Handleiding

30 September 2024
Quoizel

Quoizel Regency RGN8617WS Handleiding

30 September 2024
Quoizel

Quoizel Desmond DES8624MBK Handleiding

30 September 2024
Quoizel

Quoizel Elias PCEIA8532MBK Handleiding

30 September 2024
Quoizel

Quoizel Platinum PCDV8603C Handleiding

30 September 2024
Quoizel

Quoizel Bartley BART8616MBK Handleiding

30 September 2024
Quoizel

Quoizel Haverfield HAV8624C Handleiding

30 September 2024
Quoizel

Quoizel Haverfield HAV8633C Handleiding

30 September 2024
Quoizel

Quoizel Devon Court DEVN8624MBK Handleiding

30 September 2024
Quoizel

Quoizel Pensbury PEN8616MBK Handleiding

30 September 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Nitecore

Nitecore HA15 UHE Handleiding

30 December 2025
Nitecore

Nitecore NPL25 GL Handleiding

30 December 2025
Genaray

Genaray Bright Beast TIR-1X1B Handleiding

27 December 2024
Genaray

Genaray Quad Sun QS-1X4 Handleiding

27 December 2024
Aputure

Aputure STORM 1200x Handleiding

24 December 2024
Kogan

Kogan KAABLGTBARD Handleiding

23 December 2024
Kogan

Kogan KASMCRTNLTA Handleiding

23 December 2024
LumenRadio

LumenRadio CRMX Galileo MAX Handleiding

21 December 2024
Showtec

Showtec Performer Fresnel 2200 DDT Handleiding

21 December 2024
Showtec

Showtec AirDrive 2.4 IP Handleiding

21 December 2024