Quantum Omicron 3 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Quantum Omicron 3 (4 pagina's) in de categorie Flitser. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
Omicron3 Flash/Video Ring Light OM3 –
Flash / Video Operation
●TTL or Manual flash controlled by CoPilot
● Video light for cameras with video capture
1.0 Introduction
Omicron3 Flash/Video Ring Light provides both flash and continuous video
lighting for ideal illumination. Designed specifically for 35mm SLR type still and
video cameras, it is also adaptable to other camera types.
Omicron3 um emanates from 80 critically ‘s “chromatically correct” light spectr
color-balanced LEDs. Colored LEDs mixed with white LEDs fill in the spectral
gaps characteristic of white-only LED lights.
Omicron3 interfaces with Quantum CoPliot full coordination with Nikon or Canon
camera systems, in TTL or manual modes.
Important : The firmware updates below may be required for Flash / Video
Simultaneous Operation:
CoPilot:
Canon cameras
CoPilot QF91C Version 1.06 or later, no update required.
Nikon cameras
CoPilot QF91N Version 1.06 or later, no update required.
Visit to download the latest CoPilot firmware and click Support,
www.qtm.com
Updates and Conversions
2.0 Overview
The Quantum Omicron 3 (OM3) Flash/Video Ring Light for flash/video operation
consists of:
OM3 - Ring Light with removable lens for holding color gels
CQ2 - Flash cable for connecting OM3 to Quantum Turbo battery pack.
OM3 can be powered by all Quantum Turbo batteries.
CQ8, CCQ8 cables may also be used with OM3
FW20 - Sync Cord manual flash trigger from camera.
FW31 - Din cable for connecting to Quantum CoPilot QF91 for TTL/Man
Operation.
!! WARNING DANGEROUS HIGH VOLTAGE !! --
The Omicron Flash/Video Ring light contains dangerous high
voltages within. For professional use only. Do not disassemble
this equipment. In the event of physical damage immediately
disconnect power and return the unit to Quantum for repair.
2.1 Additional Accessories
Qf91N For TTL control of Omicron by Nikon cameras. –
Qf91C For TTL control of Omicron by Canon cameras. –
QF51 20 ft. extension cable. –
Extension cable connects the CoPilot to the OM3 for off camera TTL lighting.
434 / 435 Sync Cords
The CoPIlot has an internal radio that is compatible with the Quantum
FreeXWire radio system.
To use another radio system connect the 434/435 sync cords to the camera PC,
or use a hot shoe adapter from your camera manufacturer that includes a PC
nipple.
3.0 Mounting & Power Accessories
3.1 Mounting
QF29 for under camera mounting –
OM42 for twin rail mounting –
3.2 Power
Any TURBO battery
4.0 Flash operation
4.1 Connections
4.2 Flash Modes
Two modes of flash operation are available, TTL and manual. Flash output can
be adjusted in both modes using the Local switch located on top of the CoPilot.
Connect the OM3 to a
Quantum CoPilot using a
FW31 cable.
Note : The CoPilot does not
require a battery when
connected to the OM3
The “ON” indicator on
OM3 should blink once
per second. The OM3 is
ready to operate.
If the “ON” indicator blinks
three times per second, it
indicates the High Voltage
is not available. Check the
Turbo battery pack
operation.
Connect the flash cable from
Turbo battery pack to OM3.
Turn on the power of Turbo
battery pack.
Exposure Adjustment
TTL
The exposure can be
adjusted from -27 stops to
+2 stops.
Manual
Exposure can be adjusted
from 1/32+ of the shutter
speed to 1/1(full shutter
speed).
When the CoPilot is set to
Manual mode, exposure is
determined using the
shutter speed.
When the CoPilot is set to TTL mode, the
camera uses its’ own internal metering
system to determine the proper exposure.
Choose AF for
Auto Focus assist.
The OM3 will turn on in
video mode during low
light situations when the
camera requires
assistance in focusing.
5.0 Video Operation
5.1 Connections
5.2 Video ON / OFF
5.3 Automatic Lighting Track (ALT) Operation
Automatic Lighting Track (ALT) Operation will keep the illumination on the
subject constant when the distance between the subject and OM3 Ring Light
changes. It will automatically decrease the light output level when the OM3 Ring
Light is close to the subject. It will automatically increase the light output level
when moving the OM3 Ring Light away from the subject.
Turn OM3 ON
Press the push button once and the light will stay on steady. Aim the OM3 at your ON
subject.
Indications
If the “AUTO” indicator is blinking fast you are too lose to your subject and you need to ,
move away.
If the “AUTO” indicator is blinking slowly you are too far from your subject and you need ,
to move close r.
The “ON” indicator on OM3
should blink once per
second. The OM3 is ready
to operate.
If the “ON” indicator blink
sthree times per second, it
indicates the High Voltage is
not available. Check the
Turbo battery pack
operation.
Connect the flash cable from
Turbo battery pack to OM3.
Turn on the power of Turbo
battery pack.
Video On
Press the push button once
and the light will stay on ON
steady.
Video Off
Press and hold the push
button for 2 seconds. The
ON light will turn off and the
OM3 light will gradually dim.
Adjust the light intensity
Turn the intensity knob
clockwise to increase the
light intensity, count-
clockwise to decrease the
light intensity.
Set light output level
Stand at the maximum distance you intend to shoot at
and set the intensity knob to 100%. Your minimum
shooting distance will be one half of your maximum.
Turn ON ATL
While aiming at your subject, push the power button once.
The “AUTO” indicator lights.
Turn OFF the ATL
Push the push button once or adjust the light intensity knob,
the “AUTO” indicator will turn off and “ON” indicator is on.
Product specificaties
| Merk: | Quantum |
| Categorie: | Flitser |
| Model: | Omicron 3 |
Heb je hulp nodig?
Als je hulp nodig hebt met Quantum Omicron 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Flitser Quantum
18 November 2024
15 Augustus 2023
15 Augustus 2023
Handleiding Flitser
- Flitser Braun
- Flitser Sony
- Flitser Panasonic
- Flitser Nikon
- Flitser Asus
- Flitser Canon
- Flitser Olympus
- Flitser Audio-Technica
- Flitser Dorr
- Flitser Easymaxx
- Flitser Fujifilm
- Flitser Godox
- Flitser Kenko
- Flitser Konica Minolta
- Flitser Konig
- Flitser Leica
- Flitser Logilink
- Flitser Metz
- Flitser Minox
- Flitser Neewer
- Flitser Nissin
- Flitser Pentax
- Flitser Pulsar
- Flitser Ricoh
- Flitser Rollei
- Flitser SeaLife
- Flitser Sigma
- Flitser Sunpak
- Flitser Triopo
- Flitser Vivitar
- Flitser Yongnuo
- Flitser Goodram
- Flitser Vello
- Flitser Manfrotto
- Flitser Cullmann
- Flitser Xit
- Flitser Hähnel
- Flitser Ikan
- Flitser GVM
- Flitser Genaray
- Flitser Profoto
- Flitser Anton/Bauer
- Flitser Impact
- Flitser Lume Cube
- Flitser Aputure
- Flitser Xantech
- Flitser Bolt
- Flitser Elinchrom
- Flitser Vimar
- Flitser Dracast
- Flitser Rotolight
- Flitser SWIT
- Flitser COLBOR
- Flitser Cactus
- Flitser PolarPro
- Flitser ANDYCINE
- Flitser Westcott
- Flitser Ikelite
- Flitser Kaiser Fototechnik
- Flitser Lastolite
- Flitser FoxFury
- Flitser Jinbei
- Flitser Quadralite
- Flitser Luxli
Nieuwste handleidingen voor Flitser
13 December 2024
13 December 2024
13 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024