Qualcast QG-PH 2652 Handleiding

Qualcast Heggenschaar QG-PH 2652

Lees hieronder de 📖 handleiding in het Nederlandse voor Qualcast QG-PH 2652 (20 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
POWERFUL 25CC
2 STROKE ENGINE.
Ideal for medium to large gardens.
LONG DUAL ACTION 60CM
OVERALL BLADE LENGTH.
Large cutting area for efficiency.
28MM TOOTH SPACING.
For greater performance
and precise finish.
EASY PULL
STARTING SYSTEM.
Quick & easy to start.
ROTATING
REAR HANDLE.
For greater control & comfort.
25cc
Petrol Hedge Trimmer
Original Operating Instructions
AFTER SALES SUPPORT
UK / IRELAND HELPLINE NO 0151 6491500
REP. IRELAND HELPLINE NO 1890 946244
WEB SUPPORT www.einhell-uk.co.uk
MODEL: QG-PH2652
MANUFACTURERS ARTICLE NO: 34.038.28
02
Contents
03. Safety Guide
05. Product Diagrams
1 0. Technical Data
12. Assembly
16. Declaration of Conformity
17. Product Guarantee
Read and follow the operating instructions and safety information
before using for the first time.
Helpline No. UK 0151 649 1500 / IRE 189 094 6244
03
Safety information:
1. This machine can cause serious injuries. Read
the instructions for use carefully to discover how to
use it correctly:
- preparation
- maintenance
- starting and stopping the machine
Make yourself familiar with all the adjusters on
the machine and how to use it properly.
2. Children must never be allowed to use the
hedge trimmer.
3. Take care near overhead power cables.
4. Do not use the hedge trimmer when people
are nearby, particularly children.
5. Wear suitable clothing. Do not wear loose
clothing or jewelry as it may get caught in moving
parts. We recommend that you wear strong
gloves, non-slip shoes and safety goggles.
6. Stop the engine or pull the mains plug before
the following:
- Cleaning or removing a blockage
- Carrying out inspections, maintenance or other
work on the machine
- Adjusting the working position of the cutters
- If the hedge trimmer is left unattended
7. If the angles of the cutter and/or the length of
the shaft can be adjusted on the hedge trimmer,
do not hold the blades when adjusting the
working position of the cutter. Always make sure
that the cutter is in the correct working position
before you start the engine or connect the plug
to the mains supply.
8. Always stand in a safe position whilst using the
machine, particularly if you are using steps or a
ladder.
9. Handle fuel with care. It is highly inflammable
and the fumes are explosive. Be sure to comply
with the following points:
- Only use containers that are specially designed
for this purpose
- Never remove the fuel tank cap or refuel if the
engine is running or hot. Prior to refueling the
equipment, allow the engine and the exhaust
parts to cool down.
- Do not smoke.
- Only refuel out in the open.
- Never store the hedge trimmer or the fuel tank in
a room with a naked ame, for example a lit
water heater.
- If petrol has overflowed, do not attempt to start
the engine. Instead remove the equipment from
the affected area rst.
- Always empty the tank out in the open.
- Do not inhale fuel vapors. They are toxic.
10. Do not carry out any repair work on the
machine unless you have been trained to do so.
11. Do not use the machine if it has a damaged
or excessively worn cutter.
12. To reduce the risk of fire ensure that the
engine and silencer are clear of deposits, leaves
and lubricants.
13. The machine may exceed 85 db (A) at the
workplace. The operator will require noise protection
measures and ear defenders if this is the case.
14. Always make sure that all the handles and
safety equipment are tted whilst you are using
the machine. Never attempt to use an
incomplete machine or one that has been
modified illegally.
15. Always use both hands if the hedge trimmer is
tted with more than one handle.
16. Always place the cover over the cutter when
transporting or storing the machine.
17. Important. This hedge trimmer is suitable for
cutting hedges, bushes and shrubs. Any use
which is not expressly permitted in manual may
result in damage to the hedge trimmer and
place the user in serious danger.
18. If it becomes necessary to stop the
machine immediately, set the ON/OFF switch to
“Stopor 0
19. Make yourself familiar with your surroundings
and watch for possible dangers that you may not
be able to hear due to the noise generated by
the machine.
20. If the cutters touch a foreign body or should
the operational noises increase or the hedge
trimmer vibrate severely, switch off the engine
and wait for the cutters to stop. Pull off the spark
plug boot from the spark plug and carry out the
following measures:
- Check for damage.
- Check for loose parts and secure all loose parts.
- Replace the damaged parts with equivalent
spare parts or have the damaged parts repaired.
21. Switch off the engine prior to:
- Cleaning or removing a blockage.
- Carrying out inspections, maintenance or other
work on the hedge trimmer.
- Adjusting the working position of the cutters.
- If the hedge trimmer is left unattended
Helpline No. UK 0151 649 1500 / IRE 189 094 6244


Product specificaties

Merk: Qualcast
Categorie: Heggenschaar
Model: QG-PH 2652

Heb je hulp nodig?

Als je hulp nodig hebt met Qualcast QG-PH 2652 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heggenschaar Qualcast

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar