QSC SC28 Handleiding

QSC Processor SC28

Lees hieronder de đź“– handleiding in het Nederlandse voor QSC SC28 (32 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
SC281675 MacArthur Blvd., Costa Mesa, CA, 92626 USA
Main Number (714) 754-6175 or toll free (USA only) (800) 854-4079
Customer Service(714) 957-7150 or toll free (USA only) (800) 772-2834
Loudspeaker Signal Processing Products User Manual
SC28 Two-Input, Eight-Output System Controller for QSC Loudspeakers
*TD-000238-00*
TD-000238-00 rev.C
2
IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous” voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in this manual.
SAFEGAURDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to
assure your personal safety. Improper use can result in potential electrical shock or fire hazards. In order
not to defeat the safeguards, observe the following instructions for its installation, use and servicing.
CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.
1- Maximum operating ambient temperature is 40°C (104°F).
2- Never restrict airflow through the device vents. Please insure that the air intake and exhaust vents are
unobstructed.
3- When installing equipment into rack, distribute the units evenly. Otherwise, hazardous conditions
could be created by an uneven weight distribution.
4- Connect the unit only to a properly rated supply circuit. The SC28 is suitable for connection to 100 - 240
VAC, 50 - 60 hertz, with no special considerations other than the appropriate IEC power cord.
5- Reliable Earthing (Grounding) of rack-mounted equipment should be maintained.
FCC INTERFERENCE STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance to the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by switching the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
© Copyright 2007, QSC Audio Products, LLC QSC® is a registered trademark of QSC Audio Products, LLC “QSC” and the QSC logo are registered
with the U.S. Patent and Trademark Office. All trademarks are the property of their respective owners.
3
Introduction
Congratulations and thank you for your purchase of this professional, loudspeaker signal processing product. To get the most from your
investment, we recommend you review all the information provided in this User Manual.
The SC28 is a two-input, eight-output signal processor intended for use with QSC loudspeakers and QSC power amplifiers. The SC28
provides QSC system-specific signal processing for getting the highest performance and superior sound quality from QSC loudspeakers
integrated with QSC amplifiers.
Two-channels of audio enter the SC28 via locking female XLR connectors. Digital audio conversion is 48 kHz, 24-bit, input and output
with a very low noise floor and wide dynamic range. DSP is 32/40-bit floating point. Four channels of output for each of the two inputs
are provided for controlling up to 3-way systems with subwoofers.
The SC28 provides excellent sound quality, durable construction and simple deployment. Amplifiers are matched to the drivers with
active equalization and precise crossover control. Active loudspeaker protection extends the life of drivers. The SC28 solves many appli-
cation challenges by greatly simplifying the configuration of multi-way loudspeaker systems. SC28 and QSC loudspeakers are the per-
fect solution for public performances, corporate events and private parties demanding flexible and excellent sounding system solutions.
SC28 Features
1- Input meters 6- Output connectors
2- LCD display 7- Input connectors
3- Output meters 8- USB port
4- Rotary encoder knob (press-to-select) 9- IEC inlet
5- Power LED 10- Firmware update mode select (recessed)
3
8
4
7
12
5
69
10


Product specificaties

Merk: QSC
Categorie: Processor
Model: SC28

Heb je hulp nodig?

Als je hulp nodig hebt met QSC SC28 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Processor QSC

QSC

QSC SC28 Handleiding

23 Oktober 2024
QSC

QSC RAVE 188s Handleiding

23 Oktober 2024
QSC

QSC Core 3000 Handleiding

23 Oktober 2024
QSC

QSC DSP-4 Handleiding

23 Oktober 2024
QSC

QSC RAVE 522ua Handleiding

23 Oktober 2024
QSC

QSC RAVE 88s Handleiding

23 Oktober 2024
QSC

QSC RAVE 520uz Handleiding

23 Oktober 2024
QSC

QSC RAVE 522aa Handleiding

23 Oktober 2024

Handleiding Processor

Nieuwste handleidingen voor Processor