QSC SC-312X Handleiding

QSC Speaker SC-312X

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC SC-312X (26 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
Developed specifically for the unique requirements
of professional motion picture playback, the SC-312X
extends QSC’s commitment to the cinema market. As
a member of the DCS Digital Cinema Speaker Series,
the SC-312X is a passive, two-way, screen channel
loudspeaker system comprised of two main units—the
HF-63X1 high frequency system and the LF-3115 low-
frequency system.
The HF-63X1 high-frequency system features a 2.5 "
(63mm) titanium diaphragm compression driver
mounted on a custom designed high frequency
cinema horn with an adjustable pan and tilt bracket.
The HF-63X1 includes a driver protection and
equalization network. DC blocking capacitors protect
against DC or low-frequency signals that would
likely destroy an unprotected driver. Power limiter
circuitry protects the driver from overpowering and
a response correction filter smoothes the frequency
response of the horn/driver combination. The driver
and equalization network provides for more reliable
operation, ensuring the show will go on.
The LF-3115 15 (381mm) low-frequency enclosure "
is designed specifically to address the extended low-
frequency response required for cinema applications.
The LF-3115 covers the frequency range from
35 Hz to 1000 Hz, depending upon the high-
frequency system requirements.
The SC-312X is designed for ease of installation.
The HF-63X1 components come pre-assembled to
reduce field assembly time. Three bolts are all that
are required to secure the HF-63X1 to the top of the
LF-3115 enclosure.
SC-312X
Cinema Loudspeaker System
Specifications SC-312X
Nominal Coverage 90° horizontal x +20 to -30° vertical
Frequency Range 33 Hz - 16 kHz (-6 dB)
Impedance 8 Ω
Sensitivity 1 watt /1 meter, 95 dB
half space
Maximum Input Power1
2 hours of 6 db crest factor 150 W RMS
pinknoise, 50 Hz - 20 kHz,
AES method
Recommended Amplifier Power 300 W RMS maximum
Recommended Processing Subsonic filter below 30 Hz, > 18 dB per octave
LF-3115 HF-63X1
Connectors Barrier strip screw terminals Barrier strip screw terminals
accept up to #10 AWG stranded accept up to #10 AWG stranded
wire, four terminals; two inputs wire, four terminals; two inputs
and two parallel outputs and two LF-outputs
Transducers One 15" (381mm) high efficiency, 1.5" (38mm) exit, 2.5" titanium
extended bass woofer featuring a diaphragm compression driver
3" copper voice coil
Enclosure Quasi B4 alignment, ported Tilt/Pan Bracket
enclosure with fully flared ports, ±1 vertical tilt
symmetrical port design, tuned to ±1 horizontal pan
36 Hz, constructed of MDF and
heavily braced. Features vandal
resistant woofer mounting bolts
Dimensions (HWD) 18.5" x 30" x 20.3" 16" x 30" x 20"
(470 mm x 762 mm x 516 mm) (406 mm x 762 mm x 508 mm)
Weight - Net 83 lbs (38 kg) 40 lbs (18.4 kg)
System Weight 123 lbs (56.4 kg)
Baffle Cut-Out 35.5" x 32"
1) Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz - 20 kHz band limiting, 6 dB signal crest factor.
Features
Passive, two-way, screen channel system
SC-312X provides 90° horizontal by +20° to -30° vertical coverage
Low distortion waveguide provides highly articulate dialogue
Shallow depth (20") facilitates installation
SC-312X
Dimensions
qscaudio.com
Specifications subject to change without notice.
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
SC-312X Spec Sheet - 02/24/06
Top
Side
21.53"
546.9 mm
20.25"
514.4 mm
30"
762 mm
Front
15.46"
392.6 mm
33.83"
859.3 mm
18.38"
466.8 mm
9.7"
246.4 mm
4"
101.6 mm
20.25"
514.4 mm
1
*TD-000219-00*
Cinema Loudspeaker Systems User Manual
HF-63X1 and HF-63X2
High Frequency Component
Introduction
The HF-63X1 and HF-63X2 are the high frequency components of full-range,
two-way screen channel loudspeaker systems for high performance cinema
applications. The HF-63X1 is designed specifically for use with QSC’s LF-
3115 low frequency loudspeaker and the HF-63X2 for the LF-3215 loud-
speaker.
The HF-63X1/X2 high-frequency system features a large format, 2.5”
(63.5mm) titanium diaphragm compression driver mounted on a custom
designed high-frequency cinema horn with an adjustable pan and tilt
bracket. The horn features broad horizontal and vertical coverage angles to
ensure coverage of every seat in the auditorium. The horn is a low-distortion
waveguide providing highly articulate dialogue without coloration associ-
ated with conventional horn loudspeakers. Equipped with a passive cross-
over providing tailored output for the LF-3115 or LF-3215, no additional
signal processing is required.
The HF-63X1/X2 components come pre-assembled to reduce field assembly
time. Three bolts are all that are required to secure the HF-63X1/X2 to the
top of a QSC low frequency loudspeaker. Threaded inserts in the LF enclo-
sures and matching punched hole pattern in the HF-63X1/X2 make mounting
to the low frequency enclosure simple.
Mounting
Refer to the illustration for mounting information. The HF-63X1/X2 attaches
to the top of the LF-3115 or LF-3215 with three 5/16-18 bolts, 0.75” long,
with lock washers. This hardware ships installed on the low frequency cabi-
net. We recommend the use of serviceable thread locking compound when
installing the bolts to prevent loosening due to vibration. Aim the horn in the
horizontal plane (pan) before tightening. Adjust the vertical tilt with the
bracket adjustment.
Install in accordance with QSC Audio Products instructions
and a licensed, professional engineer. Only use attachments,
mounts, accessories, or brackets specified by QSC Audio
Products, Inc. Refer all servicing to qualified personnel. Ser-
vicing is required when the apparatus has been damaged in
any way.
WARNING! Before placing, installing, rigging, or suspending
any speaker product, inspect all hardware, suspension, cab-
inets, transducers, brackets and associated equipment for
damage. Any missing, corroded, deformed or non-load rated
component could significantly reduce the strength of the
installation, placement, or array. Any such condition
severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for
the loading conditions of the installation and any possible
short-term unexpected overloading. Never exceed the rating
of the hardware or equipment. Consult a licensed, profes-
sional engineer when any doubt or questions arise regarding
a physical equipment installation.
TD-000219-00 rev.A
© Copyright 2006, QSC Audio Products, Inc.
QSC® is a registered trademark of QSC Audio Products, Inc.
“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office
1675 MacArthur Blvd., Costa Mesa, CA, 92626 USA
Main Number (714) 754-6175 Sales & Marketing (714) 957-7100 or toll free (USA only) (800) 854-4079
Customer Service(714) 957-7150 or toll free (USA only) (800) 772-2834


Product specificaties

Merk: QSC
Categorie: Speaker
Model: SC-312X

Heb je hulp nodig?

Als je hulp nodig hebt met QSC SC-312X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker QSC

QSC

QSC M10 Kit-C Handleiding

25 November 2024
QSC

QSC CSM12 Handleiding

25 November 2024
QSC

QSC HPR152F Handleiding

25 November 2024
QSC

QSC HPR153F Handleiding

25 November 2024
QSC

QSC CSM15 Handleiding

20 November 2024
QSC

QSC CSM10 Handleiding

20 November 2024
QSC

QSC HPR151W Handleiding

20 November 2024
QSC

QSC HPR181W Handleiding

20 November 2024
QSC

QSC MD-FP122-66 Handleiding

5 November 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker