QSC RAVE 80s Handleiding

QSC Processor RAVE 80s

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC RAVE 80s (36 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

RAVE

“S” series Digital Audio Router

U S E R M A N U A L

▼▼▼▼▼

RAVE 80s

(8 AES3 outputs)

▼▼

▼

RAVE 81s

(8 AES3 inputs)

▼▼

▼

RAVE 88s

(4 AES3 inputs + 4 AES3 outputs)

▼▼

▼▼▼

RAVE 160s-24

(16 analog audio outputs)

▼▼

▼▼▼

RAVE 161s-24

(16 analog audio inputs)

▼▼▼▼▼

RAVE 188s-24

(8 analog audio ins + 8 analog audio outs)

*TD-000070-00*

TD-000070-00

Rev. C

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office.

RAVE™ is a trademark of QSC Audio Products, Inc. CobraNet™ is a trademark of Peak Audio, Inc.

EXPLANATION OF GRAPHICAL

SYMBOLS

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s en-

closure that may be of sufficient magnitude to

constitute a risk of electric shock to humans.

The exclamation point within an equilateral

triangle is intended to alert the users to the

presence of important operating and mainte-

nance (servicing) instructions in the litera-

ture accompanying the product.

CAUTION: To reduce the risk of electric shock, do not remove the

cover. No user-serviceable parts inside. Refer servicing to quali-

fied service personnel.

WARNING: To prevent fire or electric shock, do not expose this

equipment to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION: Pour eviter les risques de choc électrique, ne pas

enlever le courvercle. Aucun entretien de pièces intérieures par

l’usager. Confier l’entretien au personnel qualifié.

AVIS: Pour eviter les risques d’incendie ou d’électrocution,

n’exposez pas cet article à la pluie ou a l’humidité.

AVIS

RISQUE DE CHOC ÉLECTRIQUE

NE PAS OUVRIR

VORSICHT: Um das Risiko eines elektrischen Schlages zu

vermindern, Abdeckung nicht entfernen! Keine Benutzer

Wartungsteile im Innern. Wartung nur durch qualifiertes

Wartungspersonal.

WARNUNG: Zur vermeidung von Feuer oder elektrischen

Schlägen, das Gerät nicht mit Regen oder Feuchtigkeit in

Berührung bringen!

VORSICHT

GEFAHR EINES ELEKTRISCHEN

SCHLAGES. NICHT ÖFFNEN!

SAFEGUARDS

Electrical energy can perform many useful functions. This

unit has been engineered and manufactured to assure your

personal safety. Improper use can result in potential elec-

trical shock or fire hazards. In order not to defeat the

safeguards, observe the following instructions for its in-

stallation, use and servicing.

PRECAUTIONS

L’énergie électrique peut remplir de nombreuses fonctions

utiles. Cet appariel a été conçu et réalisé pour assurer une

sécurité personnelle entiére. Une utilisation impropre peut

entraîner des risques d’électrocution ou d’incendie. Dans le

but de ne pas rendre inutiles les mesures de sécurité, bien

observer les instructions suivantes pour l’installation,

l’utilisation et l’entretien de l’appareil.

EXPLICATION DES

SYMBOLES GRAPHIQUES

Le symbole éclair avec point de flèche à

l’intrérieur d’un triangle équilatéral est utilisé

pour alerter l’utilisateur de la presence à

l’intérieur du coffret de “voltage dangereux”

non isolé d’ampleur suffisante pour constituer

un risque d’elétrocution.

Le point d’exclamation à l’intérieur d’un tri-

angle équilatéral est employé pour alerter les

utilisateurs de la présence d’instructions

importantes pour le fonctionnement et

l’entretien (service) dans le livret d’instruction

accompagnant l’appareil.

ERKLÄRUNG DER GRAPHISCHEN

SYMBOLE

Der Blitz nach unten zeigendem Pfeil in einem

gleichseitigen Dreieck weist den Benutzer auf

das Vorhandensein einer unisolierten,

”gefährlichen Spannung“ im Gehäuse hin, die

stark sein kann, einer Person einen elektrischen

Schlag zu versetzen.

Das Ausrufzeichen in einem gleichseitigen

Dreieck weist den Benutzer auf wichtige

Betriebs- und Wartungs- vorschriften in den

beiliegenden Unterlagen des Gerätes hin.

FEDERAL

COMMUNICATIONS

COMMISSION

(FCC)

INFORMATION

NOTE: This equipment has

been tested and found to com-

ply with the limits for a Class

A digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to

provide reasonable protection

against harmful interference

in a commercial installation.

This equipment generates,

uses, and can radiate radio

frequency energy and, if not

installed and used in accor-

dance with the instructions,

may cause harmful interfer-

ence to radio communica-

tions. Operation of this equip-

ment in a residential area is

likely to cause harmful inter-

ference, in which case the

user will be required to cor-

rect the interference at his or

her own expense.

Attention!

•Maximum operating ambient temperature is 65° C.

•Never restrict the airflow throught the devices’ fans

or vents.

•When installing equipment into a rack, distribute

the units evenly. Otherwise, hazardous conditions

may be created by an uneven weight distribution.

•Connect the unit only to a properly rated supply

circuit.

•Reliable Earthing (Grounding) of Rack-Mounted

Equipment should be maintained.

RAVE “ ”S Series Digital Audio Router User Manual

Warning Notices ................................................................................................................................................. 2

Introduction ......................................................................................................................................................... 4

Illustration of RAVE unit ................................................................................................................................. 5

Glossary .......................................................................................................................................................... 6

How it works .................................................................................................................................................. 8

Channel routing ............................................................................................................................................ 10

Installation ......................................................................................................................................................... 11

Pre-Installation preparation: analog signal levels (RAVE 160/161/188s only) ........................................... 11

Rack mounting .............................................................................................................................................. 13

Connections ....................................................................................................................................................... 13

Ethernet connection ..................................................................................................................................... 13

Analog audio connections (RAVE 160/161/188 only) .................................................................................. 14

Digital audio connections (RAVE 80/81/88 only) ......................................................................................... 15

AC power ...................................................................................................................................................... 16

Master/Sync output ..................................................................................................................................... 16

Slave/Sync input ......................................................................................................................................... 16

RS-232 port .................................................................................................................................................. 17

Synchronizing to an AES3 (AES/EBU) stream................................................................................................18

Operation ............................................................................................................................................................ 20

Network activity/status indicators .............................................................................................................. 20

Channel audio signal indicators................................................................................................................... 22

Program and software “kill” mode .............................................................................................................. 24

Routing ......................................................................................................................................................... 24

Network Design Considerations ................................................................................................................... 26

Specifications ................................................................................................................................................... 29

Appendix ............................................................................................................................................................ 32

Ethernet Cabling ........................................................................................................................................... 32

RS-232 Port Information ............................................................................................................................... 32

Resources ..................................................................................................................................................... 33