QSC PLX3102 Handleiding

QSC Receiver PLX3102

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC PLX3102 (68 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/68

PLX Series Professional Audio Amplifiers

User Manual

4-ohm minimum impedance models with Speakon® output terminals:

PLX 1104

PLX 1804

2-ohm minimum impedance models with Speakon and binding post terminals:

PLX 1802

PLX 2502

PLX 3102

PLX 3602

*TD-000214-00*

TD-000214-00 Rev.E

Important Safety Precautions & Explanation of Symbols

1- Read these instructions.

2- Keep these instructions.

3- Heed all warnings.

4- Follow all instructions.

5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not use this apparatus near water.

6- Clean only with a dry cloth.

7- Do not block any ventilation openings.

8- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.

A grounding plug has two blades and a grounding prong. The wide blade or third prong are provided for your safety. If the provided plug

does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.

10- Protect the power cord from being walked on or pinched, particularly plugs, convenience receptacles, and the point where they exit

from the apparatus.

11- Use only attachments/accessories specified by QSC Audio Products, LLC

12- Use only with hardware, brackets, stands, and components sold with the apparatus or by QSC Audio Products, LLC

13- Unplug the apparatus during lightning storms or when unused for long periods of time.

14- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and main-

tenance (servicing) instructions in this manual.

The lightning flashes printed next to the OUTPUT terminals of the amplifier are intended to alert the user to the risk of hazardous

energy. Output connectors that could pose a risk are marked with the lightning flash. Do not touch output terminals while amplifier

power is on. Make all connections with amplifier turned off.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu-

lated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock

to humans.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED PERSONNEL.

WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.

FCC INTERFERENCE STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in accordance to the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by switching the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio or TV technician for help.

QSC® is a registered trademark of QSC Audio Products, LLC

"QSC" and the QSC logo are registered with the U.S. Patent and Trademark Office

Speakon® is a registered trademark of Neutrik Inc. All trademarks are the property of their respective owners.

Introduction

Thank you for purchasing this QSC power amplifier. Please read the following directions to obtain the best results. This manual covers all

models of the PLX series. Illustrations show the PLX 1804 to be representative of the PLX 1104 and 1804 models, while the PLX 3602 illus-

tration is representative of the PLX 1802, PLX 2502, PLX 3102, and PLX 3602 models.

The PLX 1104 and PLX 1804 models feature:

•4-ohm minimum impedance

•Speakon loudspeaker connections

•QSC PowerLight high-performance, compact, and light weight switching power supply

•Complete amplifier protection

•XLR and 1/4-inch TRS balanced input connectors

•Gain controls are recessed and 21-step detented

•Active inrush current limiting eliminates need for power sequencing

•LED indicators for power, input signal presence, -10 dB, and clip/protect

•Rear chassis tabs and front panel design protect controls and connectors

In addition, the PLX 1802, PLX 2502, PLX 3102, and PLX 3602 models feature:

•2-ohm minimum impedance

•Bridgeable output

•Binding post loudspeaker connections

•Clip limiter

•33 Hz low frequency filter

•Low-cut/full-range/high-cut selector

•Stereo/bridge mode/parallel input selector

•Front panel LED indicators for parallel and bridge modes

Unpacking

Factory packed carton contains:

•PLX amplifier

•User's manual

•Adhesive rubber feet (for non-rack mount applications)

•IEC-type detachable power cord

Use the same type carton when shipping the amplifier.

Front Panel

1- Power Switch

2- Cooling Air Exhaust Vents

3- LED Indicators

4- Gain Controls

Product specificaties

Merk:	QSC
Categorie:	Receiver
Model:	PLX3102
Kleur van het product:	Zwart, zilver
Gewicht:	95 g
Breedte:	483 mm
Diepte:	89 mm
Hoogte:	326 mm
Gewicht verpakking:	11800 g
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Certificering:	CE, FCC, cUL, UL
Aansluiting voor netstroomadapter:	Ja
Bedoeld voor:	Thuis
Audio-uitgangskanalen:	- kanalen
Signaal/ruis-verhouding:	-107 dB
Totale harmonische vervorming (THD):	1 procent
Rackcapaciteit:	2U
AC-ingangsspanning:	120 V
Piekvermogen per kanaal:	3100 W
Synchronisatie ingangsimpedantie:	10000 Ohm
Versterker klasse:	H
Speakers connectiviteit type:	XLR / 1/4" TRS
Stroom (max.):	9.5 A
Dempingsfactor:	500