QSC NC-110 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor QSC NC-110 (16 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
TD-001654-01-A
*TD-001654-01*
ePTZ
NC-110
PTZ
NC-12x80
PTZ
NC-20x60
Hardware User Manual
Q-SYS NC Series Cameras
2
TD-001654-01-A
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed, the result may be bodily
injury or death.
The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it
may result in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term "NOTE" is used to indicate additional useful information.
The intent of the lightning flash with an arrowhead symbol within an equilateral triangle is to alert the user to the presence
of un-insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety,
operating, and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Install in accordance with the manufacturer's instructions.
6. Refer all servicing to qualified service personnel.
7. Adhere to all applicable local codes.
Maintenance and Repairs
WARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted
maintenance and repair methods. To avoid the danger of subsequent damage to the apparatus, injuries to persons, and/or
the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a
QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm,
or related damages arising from any failure of the customer, owner, or user of the apparatus to facilitate those repairs.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of Note:
the FCCRules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Expected Product Life Cycle: 10 years, Storage Temperature range: –-20°C to +60°C, range of 5 Relative Humidity:
85% RH non-condensing.
3
TD-001654-01-A
Warranty
For a copy of the QSC Limited Warranty, visit the QSC, LLC., website at www.qsc.com.
RoHS Statement
The QSC Q-SYS NC Series: NC-110, NC-12x80, and NC-20x60 are in compliance with European Directive 2015/863/EU –
Restriction of Hazardous Substances (RoHS2).


Product specificaties

Merk: QSC
Categorie: Bewakingscamera
Model: NC-110

Heb je hulp nodig?

Als je hulp nodig hebt met QSC NC-110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera QSC

QSC

QSC NC-110 Handleiding

21 November 2024

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera