QSC MP-A40V Handleiding

QSC Receiver MP-A40V

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC MP-A40V (14 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

TD-001572-01-B

*TD-001572-01*

MP-A Series

User Manual

MP-A20V MP-A40V MP-A80V

TD-001572-01-B

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may

result in damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.

The term " " is used to indicate additional useful information.NOTE

NOTE: The intent of the lightning ﬂash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated

"dangerous" voltage within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to humans.

NOTE: The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and

operating and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.

Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the ambient operating

temperature of the rack environment may be greater than room ambient. Consideration should be

given to ensure that the maximum operating temperature range -10°C to 50°C (14°F to 122°F ) is not

exceeded. Reduced Air Flow – Installation of the equipment in a rack should be such that the amount

of air ﬂow required for safe operation of the equipment is not compromised.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Do not submerge the apparatus in water or liquids.

7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.

8. Clean only with a dry cloth.

9. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.

10. Keep all ventilation openings free of dust or other matter.

11. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

12. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.

13. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

14. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

theapparatus.

15. Do not unplug the unit by pulling on the cord, use the plug.

16. Only use attachments/accessories speciﬁed by the manufacturer.

17. Unplug this apparatus during lightning storms or when unused for long periods of time.

18. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

19. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily accessible after installation.

20. Adhere to all applicable, local codes.

21. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

TD-001572-01-B

Maintenance and Repair

WARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics,

requires specially adapted maintenance and repair methods. To avoid a danger of subsequent

damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all

maintenance or repair work on the apparatus should be performed only by a QSC authorized service

station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or

related damages arising from any failure of the customer, owner or user of the apparatus to facilitate

those repairs.

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCCRules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RoHS STATEMENT

The QSC MP-A20V, MP-A40V, and MP-A80V ampliﬁers are in compliance with European Directive 2011/65/EU – Restriction of Hazardous

Substances(RoHS2).

The QSC MP-A20V, MP-A40V, and MP-A80V ampliﬁers are in compliance with “China RoHS” directives. The following chart is provided for product

use in China and its territories:

QSC MP-A20V, MP-A40V, and MP-A80V Ampli󽘀ers

部件名称

(Part Name)

有毒有害物质或元素

(Toxic or hazardous Substances and Elements)

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(vi))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

电路板组件

(PCB Assemblies)

X O O O O O

机壳装配件

(Chassis

Assemblies)

X O O O O O

O: 表明这些有毒或有害物质在部件使用的同类材料中的含量是在 SJ/T11363_2006 极限的要求之下。

(O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this

part is below the limit requirement in SJ/T11363_2006.)

X: 表明这些有毒或有害物质在部件使用的同类材料中至少有一种含量是在 SJ/T11363_2006 极限的要求之上。

(X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous

materials used for this part is above the limit requirement in SJ/T11363_2006.)

Product specificaties

Merk:	QSC
Categorie:	Receiver
Model:	MP-A40V
Kleur van het product:	Zwart
Gewicht:	4200 g
Breedte:	483 mm
Diepte:	377 mm
Hoogte:	44 mm
Gewicht verpakking:	6300 g
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Snelstartgids:	Ja
Certificering:	UL, CE, RoHS/WEEE compliant, FCC class B (conducted and radiated emissions)
Audio-uitgangskanalen:	4.0 kanalen
Frequentiebereik:	20 - 20000 Hz
Signaal/ruis-verhouding:	103 dB
Totale harmonische vervorming (THD):	- procent
Type koeling:	Actief
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Input sensitiviteit:	1230 mV
Piekvermogen per kanaal:	200 W
Versterker klasse:	D
Speakers connectiviteit type:	3.5mm
High pass filter:	Ja
Maximum input level:	12.3 V