QSC BASIS 902zz Handleiding

QSC Processor BASIS 902zz

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC BASIS 902zz (26 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
TD-000146-00 rev.A
BASIS 902zz
8 Output CobraNet Enabled Control and Monitoring Signal Processor
Hardware Manual
*TD-000146-00*
2
IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerousvoltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in this manual.
SAFEGAURDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to
assure your personal safety. Improper use can result in potential electrical shock or fire hazards. In order
not to defeat the safeguards, observe the following instructions for its installation, use and servicing.
CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.
1- Maximum operating ambient temperature is 50°C (122°F).
2- Never restrict airflow through the device fan or vents. Please insure that the air intake and exhaust
vents are unobstructed.
3- When installing equipment into rack, distribute the units evenly. Otherwise, hazardous conditions
could be created by an uneven weight distribution.
4- Connect the unit only to a properly rated supply circuit. The BASIS 902zz is suitable for connection to
100 - 240 VAC, 47 - 440 hertz, with no special considerations other than the appropriate IEC power cord.
5- Reliable Earthing (Grounding) of rack-mounted equipment should be maintained.
LITHIUM BATTERY WARNING
THIS EQUIPMENT CONTAINS A NON-RECHARGEABLE LITHIUM BATTERY. LITHIUM IS A CHEMICAL
KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGE-
ABLE LITHIUM BATTERY CONTAINED IN THIS EQUIPMENT MAY EXPLODE IF IT IS EXPOSED TO FIRE OR
EXTREME HEAT. DO NOT SHORT CIRCUIT THE BATTERY. DO NOT ATTEMPT TO RECHARGE THE NON-
RECHARGEABLE LITHIUM BATTERY.
FCC INTERFERENCE STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance to the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by switching the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
© Copyright 2004 QSC Audio Products, Inc. QSC® is a registered trademark of QSC Audio Products, Inc. “QSC” and the QSC logo are registered
with the U.S. Patent and Trademark Office. All trademarks are the property of their respective owners.
3
Introduction
1- Power indicator
2- Diagnostic indicator
3- Network status indicators
4- Port connection status indicators
5- Multi-function push buttons
6- Display
7- Rotary select/accept knob
8- Safe push switch (recessed)
9- DataPorts
10- Monitor chain in/out
11- Relay outputs
12- Logic outputs
13- Omni inputs
14- RS-232 port
15- Network status indicators
16- QSControl 10BaseT receptacle
17- CobraNet 100BaseTx receptacle
18- IEC power inlet
The BASIS 902zz provides the digital audio transport, signal
processing, control and status monitoring facilities needed
to bind a group of amplifiers and loudspeakers into an inte-
grated functioning system. In conjunction with QSCon-
trol.net software, the BASIS 902zz enables the user to
design, test and deploy professional audio reinforcement
and distribution systems ranging in size from one to hun-
dreds of channels.
Each QSC power amplifier connects directly to a BASIS
902zz via one of its four QSC DataPorts. All mission-critical
elements of the BASIS-driven sound system are monitored.
User-selected events are logged and loudspeaker protection
features unique to BASIS such as QSC's power limiter are
made possible through the DataPort functionality.
A standard Windows computer is the principle user-inter-
face for controlling the overall BASIS/QSControl system.
However, the BASIS 902zz also offers a front panel interface
for accessing critical functions.
A single QSControl server computer can support several cli-
ents running QSC's latest Venue Manager software. Thus,
the sound system can be operated via several computers,
roaming wireless laptops, tablets, etc., all at the same time,
from anywhere a connection to the QSControl network is
available.
The QSControl network can also be managed from a single
computer running both the client and the server. Once all
BASIS devices in a system are configured, a computer is no
longer required on that system’s network. All basic func-
tions of the BASIS 902zz continue to operate with or with-
out a control computer connected to the network.
Audio enters a BASIS 902zz from CobraNet source devices
such as QSC's line of RAVE digital audio routers. Any combi-
nation of 24 CobraNet channels (selected from up to 4 bun-
dles of 32 channels) can be routed into the 24 x 24 DSP
engine. Any or all of the 24 DSP channels can also be routed
to up to 32 CobraNet channels on the network.
Unlike many configurable DSP boxes, the intrinsic process-
ing latency of the BASIS 902zz is both short and fixed at
0.396 milliseconds. The delay does not change regardless of
the DSP configuration, unless the configuration intention-
ally adds more delay.
See page 14 for detailed descriptions.
Don’t want to read the entire manual? Just
want to dig right in? Go to page 18....


Product specificaties

Merk: QSC
Categorie: Processor
Model: BASIS 902zz

Heb je hulp nodig?

Als je hulp nodig hebt met QSC BASIS 902zz stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Processor QSC

QSC

QSC SC28 Handleiding

23 Oktober 2024
QSC

QSC RAVE 188s Handleiding

23 Oktober 2024
QSC

QSC Core 3000 Handleiding

23 Oktober 2024
QSC

QSC DSP-4 Handleiding

23 Oktober 2024
QSC

QSC RAVE 522ua Handleiding

23 Oktober 2024
QSC

QSC RAVE 88s Handleiding

23 Oktober 2024
QSC

QSC RAVE 520uz Handleiding

23 Oktober 2024
QSC

QSC RAVE 522aa Handleiding

23 Oktober 2024
QSC

QSC Core 3100 Handleiding

23 Oktober 2024

Handleiding Processor

Nieuwste handleidingen voor Processor