Pyle PWPSB1103 Handleiding

Pyle Soundbar PWPSB1103

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PWPSB1103 (8 pagina's) in de categorie Soundbar. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
www.PyleUSA.com
2
Installation
1. Stick the 45X10X0.5mm non-slip rubber strips (2 pieces) on the bottom of the clamps,
then insert them into the slider.
2. Align the screw holes at the bottom of the clamps with the positioning holes that have been
made in the slider and lock the M5X24mm screws and M5 spring washers to x the clamps.
3. Stick 48X30X2mm rubber non-slip pads on clamps.
www.PyleUSA.com
3
4. Installing on the cage bar of 1.5” to 2.0”. Wrap the rubber strip on the cage bar to prevent
being scratched. And then, press the aluminum rings on the rubber strip. The screw mounting
holes of the aluminum ring are aligned with the base.
• 2” Cage bar are installed using 2” aluminum ring and 120X14X1mm rubber strip.
• 1.875” Cage bar are installed using 2” aluminum ring and 130X14X2mm rubber strip.
• 1.75" Cage bar are installed using 1.75" aluminum ring and 120X14X1mm rubber strips.
• 1.5" Cage bar are installed using 1.75" aluminum ring and 120X14X4mm rubber strips.
5. Use M6X60mm screws and M6 spring washers to pass through the aluminum ring and the
base and the M6 non-slip nut at the back to x the aluminum ring on the base as shown in the
gure. Each nut should be installed in the hexagonal groove.


Product specificaties

Merk: Pyle
Categorie: Soundbar
Model: PWPSB1103

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PWPSB1103 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Soundbar Pyle

Handleiding Soundbar

Nieuwste handleidingen voor Soundbar