Pyle PT639D Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PT639D (5 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
PLEASE READ THIS USER MANUAL COMPLETELY
BEFORE OPERATING THIS UNIT
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
Read this before operation
1. Choose unit installation location carefully. Avoid placing it in direct sunlight
or close to a source of heat. Also avoid locations subject to vibrations and
excessive dust, heat, cold or moisture. Keep away from sources that hum, such
as transformers or motors.
2. This unit is extremely sensitive to magnetic elds, so do not use near large
speakers or other devices which generate magnetic elds.
3. Do not open the cabinet as this might result in damage to the circuitry or
electrical shock. If a foreign object should get into the set, contact your dealer.
4. Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered.
5. The user should not attempt to service the appliance beyond that described
in the operating instructions. All other servicing should be referred to qualied
service personnel.
6. Please do not use alcohol, ammonia or erodent, and volatile liquid to clean
the unit. If it is necessary, just use some cotton cloth with warm water to clean
its surface.
FRONT PANEL
www.PyleUSA.com
2
1. The indicator of the direction of movement of deck A
2. High-speed recording indicator
3. Power indicator
4. LINE recording input indicator
5. Cro2 tape indicator in the playing mode
6. Peak value electric level display
7. Cro2 tape indicator in the recording mode
8. Digital noise reducing indicator
9. Recording mode indicator
10. Deck A
11. When playing, press it down to play one side continuously;
Press it up to play both sides continuously in deck A
12. Press it to play the tape in deck A
13. Press the REW button for rewinding in deck A
14. Press FF button for fast-forward
15. Press it to stop and open the deck
16. Press it to choose the direction of the movement of deck A
17. High-speed recording switch
18. Left audio recording electric level control
19. Switch for recording from LINE
20. Cro2 tape function selection in the play mode
21. Power switch
22. Cro2 tape function selection in the record mode
23. Digital noise reducing function OFF
24. Right audio recording electric level control
25. Digital noise reducing function ON
26. Deck B buttonRECORD
27. Deck B buttonPLAY
28. Press the REW button for rewinding in deck B
29. Press FF button for fast forward in deck B
30. Deck B stop
31. Deck B pause
32. Deck B
www.PyleUSA.com 3
1
2
3
4 5
6
7 8
9
10 11 12 13 14 15 16 17
18
19 20
21
22 23 25
24
26 27 28 29 30 31 32
In the playing mode, press PLAY
function button to select tape type.
REAR PANEL
33. Record line input
34. Audio output 1
35. Audio output 2
BASIC OPERATIONS
Make sure that power to both the deck and your amplier/receiver is turned o
before making any connections. If the deck is placed near an amplier, TV or
tuner, noise (induced hum) or beat interference may result. If this occurs, place
the deck further away from other components or reorient its position.
C-120 cassette tapes are not recommended as they use a very thin tape base
which may become tangled around the capstan or pinch roller.
www.PyleUSA.com
4
HOW TO RECORD?
Before putting a tape into the deck, take up any slack
with a pencil or your nger tip. This precaution prevents
the tape from becoming entangled around the
capstan or pinch roller.
HOW TO SELECT THE RECORDING SOURCE?
1. Choose deck to be the source. Just play the tape in it for recording.A
2. Choose to record from program source.LINE
3. Choose deck and to be the source for mix recording.A LINE
HOW TO SET THE RECORDING ELECTRIC LEVEL?
Use the right and left electric level control knobs to adjust the level.
Usually turning the indicator to the middle works very well.
www.PyleUSA.com 5
33 34 35 36 37
AB
36. Connect with ground
37. AC 110V power input
1. Press button. 2. Press POWER STOP/EJ button to open
the deck.
3. Insert the cassette with the exposed tape side facing
down. To close the compartment, push the section of
the compartment door until it locks shut.
4. Press the PLAY button to play.
5. Press button to changeDIR
the direction of movement
in deck A.
6. Press the button to chooseMODE
play one-side or both sides.
7. Press the buttonREW
for rewinding. 8. Press button for fast-forward.FF
9. Press PAUSE button in
the B deck to pause.
10. Press button to DNR ON
automatically enter digital noise
reducing. Press OFF to stop.
LINE
In the recording mode, press
REC function button to select
tape type.


Product specificaties

Merk: Pyle
Categorie: Hifi systeem
Model: PT639D

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PT639D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem Pyle

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Lenoxx

Lenoxx CD813 Handleiding

16 November 2024
Denon

Denon CEOL N-8 Handleiding

16 November 2024
Fiio

Fiio M7K Handleiding

16 November 2024
Fiio

Fiio X1II Handleiding

16 November 2024
Fiio

Fiio M3 Handleiding

16 November 2024
Fiio

Fiio X3 Mark III Handleiding

16 November 2024
Samsung

Samsung MM-X7 Handleiding

15 November 2024