Pyle PRMC600 Handleiding
Pyle
Biljettelmachines
PRMC600
Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PRMC600 (1 pagina's) in de categorie Biljettelmachines. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
10.Maintenance
---Do not operate the unit in areas with high temperature or high humidity since it may damage the machine.
---When not using the unit for a long time, remove the power plug from the wall outlet.
---Never operate the unit under strong light.
---Clean the machine frequently after switching off and unpluging of the machine.
---Do not use this product in areas where it may be exposed to water or other liquids.
---Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaner. Use a brush or a damp cloth for cleaning.
---Rotate towards left to increase the thickness <see figure 5>
---When the problem is not solved with the adjustment of the wheel, the rubber should be replaced.
---Press the hopper plate to change a new rubber <see figure6> or you can send the machine to authorized service center.
10
Figure4 Figure5 Figure6
7. Counterfeit Detection
UV(Ultraviolet)detection function<available for the model with UV detection or the model with both UV and MG detections>
------ check all kinds of banknotes which contains UV features
---The UV function is automatically turned on by default when the machine is powered up. It can also be selected or deselected by
pressing the CF button located in the function console.
---If the machine detects a counterfeit note when counting, it will stop and emit beeping sound, while the batch display will show the
message d1 and the UV indicator will blink (alerting the user the presence of a dubious bill). The dubious bill will always be the “ ”
last one on the stacker. Remove the dubious bill, press RESET button to continue.“ ”
---The sensitivity of UV detection can be adjusted. Hold SET button for 3 seconds until the batch display shows the current sensitivity “ ”
level SE4 120 then press “ / ” “ ↑ or ” “ ↓ button to choose the desired sensitivity level (range from 0-200). After choosing of the level, ”
restart the machine to confirm.
MG (Magnetic) detection function<available for the the models with both UV and MG detections>
------ check all kinds of banknotes which contains MG features
---The MG function is automatically turned on by default when the machine is powered up. It can also be selected or deselected by
pressing the CF button located in the function console.
---If the machine detects a counterfeit note when counting, it will stop and emit beeping sound, while the batch display will show the
message d2 and the MG indicator will blink (alerting the user the presence of a dubious bill). The dubious bill will always be the “ ”
last one on the stacker. Remove the dubious bill, press RESET button to continue.“ ”
---The sensitivity of MG detection can be adjusted. Hold SET button for 3 seconds, the counting display will show the current sensitivity “ ”
level SE5 5 then press “ / ” “ ↑ ” “or ↓ button to choose the desired sensitivity level (range from 0-50). After choosing of the level, ”
restart the machine to confirm.
Note:hold SET button for 3 seconds SE5 is“ ” “ ” used to adjust MG1 sensitivity level, SE6 is“ ” “ ” used to adjust MG2“ ”
sensitivity level.
6
Su ita blefo rbot hnew ,old ,di rty ,ta tter edpo lym erbil lsan dpap erbil ls
Note: The counting mode can be changed between Automatic and Manual. When turn on the machine,“AUTO”indicator is on, the machine
is in automatic counting mode; press the AUTO button , the “AUTO” indicator will be off, the machine is in manual counting mode, under“ ”
this mode, only pressing the RESET button after placing the bills to start counting.“ ”
2>Addition Function.
Addition can be performed by pressing the ADD“ ” button (when the ADD indicator is on). In this case, removing the counted bills from
the stack will not clear the quantity counted and shown on the counting display. The next bills placed in the hopper will be counted and
added to the preceding quantity. The total amount of added bills will be shown on the counting screen. Press the ADD“ ” button to close
the function and clear the counting display.
3>Batch Function.
---The preset batch function can be performed by pressing the“BATCH” button(the BATCH indicator will appear). By default,
when pressing the “BATCH”,the batch function is turn on. The batch number can be set in amounts between 1 and 999 by pressing
NO.“0”-“9” button. To clear this function, press the “BATCH”button until the indicator is off.
---Under the batch counting mode, once the hopper is loaded, the machine will start counting and stop when the counted quantity reaches
the preset batch one.
---To repeat the batch counting operation under the same preset batch quantity, just remove the counted bill from the stacker. The unit will
batch the next group of bills under the same settings.
---If you wish to keep batching without removing the preset number, press the RESET button.“ ”
---If the counted number does not tally with the preset batch number, the counter display will show the quantity with blinking number.
---When counting with MG and/or UV detection on, the machine will stop automatically when detecting counterfeit currency. This function
can be resumed by removing the dubious bill from the stacker and pressing RESET button.“ ”
5
Su ita blefo rbot hnew ,old ,di rty ,ta tter edpo lym erbil lsan dpap erbil ls
8.Error message and solution
8
The batch display may shows some error message when counting, which means there are some problems with the machine.
Refer to the following diagram to find way to solve it.
Message Error Solution
Suspicious bill detected by UV system
Problem in the UV system
Remove the suspicious bill from the
stacker, press RESET to continue;“ ”
Lower the UV sensitivity.
Suspicious bill detected by MG system;
Problem in the MG system.
Remove the suspicious bill from the
stacker, press RESET to continue;“ ”
Lower the MG sensitivity.
Half-note detected by half-note detection
system; Problem in the half-note
detection system.
Remove the sus picious bill from the
stacker, press RESET to continue;“ ”
Remove the sus picious bill from the
stacker,press “RESET” to continue.
Remove the sus picious bill from the
stacker, press RESET to continue;“ ”
Slope-note detected by Slope-note detection
system; Problem in the slope-note detection
system.
Chain-note detected by the counting sensor
Note of size problem detected by size
detection system; Problem in the size
detection system
Remove the sus picious bill from the
stacker, press RESET to continue;“ ”
Lower the size checking sensitivity.
Double-note detected by IR system
Problem in the IR system
Remove the suspicious bill from the
stacker, press RESET to continue;“ ”
Lower the IR sensitivity.
Su ita blefo rbot hnew ,old ,di rty ,ta tter edpo lym erbil lsan dpap erbil ls
To be the latest generation of bill counter, the model is the vanguard of our evolution in bill counting technology. Its compact and
stylish design is as remarkable as its integrated electronics and multifunction capabilities. Different from other counters,
it employs many new detection methods which other counters don't have. Being improved in many aspects
of internal structure which make it quite different from other bill counters, this hi-tech compact counting machine is easy to
operate and repair. It is sturdy and utterly reliable and suitable for all kinds of banking industry and store department.
We recommend the user to verify that gift box contains all of the items listed here:
①. Machine body . Operation manual ②
③ ④. Power wire . Brush
⑤. Fuse
⑥. External display(Optional part)
---Read and understand all of the instructions and
warnings both on the machine and in the manual.
---Follow all warnings and instructions marked on the unit.
---This product should be operated only from the type of the power source indicated in the user's guide. If you are not sure of the type of
power supply in your location, consult your dealer or local power company.
---Only use the cable provided with the unit. The use of other cable may result in electric shock, fire or bring serious damage to the unit.
---Never push objects of any kind into the unit through case slots, since they may touch dangerous voltage points or shortcut parts, resulting
in a risk of fire or electric shock.
---Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If the liquid has been spilled into the unit.
c. If the unit has been exposed to rain or water.
d. If the machine has been dropped or the case has been damaged.
e. If the product shows a noticeable change in performance.
4. Safety instruction
3
3. General instruction
Su ita blefo rbot hnew ,old ,di rty ,ta tter edpo lym erbil lsan dpap erbil ls
1. Illustration
Counting sensor Counting sensor
Auto start sensor
Feeding roller
Preset sensor
Power switch
External screen jack
Bill thickness
adjustment
wheel screw
Power outlet
Rubber tongue
UV sensor
External screen
Hopper Block
Handle
Stacker Frontal platform
Hopper
Impeller
Control Panel
Su ita blefo rbot hnew ,old ,di rty ,tat ter edpo lym erbil lsan dpaperbil ls
1
d1
d2
d3
d4
d5
d6
d7
o
o
o
oon
n
n
nne
e
e
eey
y
y
y y
o
o
o
oon
n
n
nne
e
e
eey
y
y
y y oney oney o
o
o
oou
u
u
uun
n
n
nnt
t
t
tte
e
e
eer
r
r
rrounterounter
m
m
m
mmmmc
c
c
c c c c
OPERATION MANUAL
Professional Manufacturer For Money Counter
And Counterfeit Detector
Double Detection function (UV and MG)<available for the models with UV detection or the model with both UV and MG detection>
---Used to check double-note
---By default, serving as a supplementary function, the detection can be activated when the unit is powered up.
---If the machine detects a double-note when counting, it will stop and emit beeping sound, while the batch display
will show the message “d3" (alerting the user of the presence of a double-note). The double-note will always be the
last one on the stacker. Remove the dubious bill, press “RESET” button to continue.
Half-note Detection Function <available for the models with UV detection or the model with both UV and MG detection>
---Used to check half-note.
---By default, serving as a supplementary function, the half-note detection can be activated when the unit is powered up.
---If the machine detects a half-note when counting, it will stop and emit beeping sound, while the counting display will show the message
d5 alerting the user the presence of a half-note bill). The dubious bill will always be the last one on the stacker. Remove the dubious “ ”
bill, press RESET button to continue <the counting display will clear>.“ ”
Note: User can resume the original set of sensitivity level by manufacturer. Press ADD button for 3 seconds, the display will show ---“ ” “ ”
which means the sensitivity restores factory setting now.
7
Su ita blefo rbot hnew ,old ,di rty ,ta tter edpo lym erbil lsan dpap erbil ls
---To reduce the risk of electric shock, do not disassemble this product.Take it to qualified service personnel when service or repair work
is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
---Do not use the unit if the power cord is damaged or if the plug socket contact is loose. Not following those instructions may result in
electric shock , fire or other hazards.
---When unplugging the power plug, do not pull it by the cord but rather grip the plug and pull it out, not following those instruction may
result in electric shock, fire or damage to the unit.
5.Power up
6.Counting function
---Connect the power cord to the machine (power outlet), then plug it to power source and switch the unit on; the unit will conduct a
self-check by spanning the feeding roller while the MG and/or UV functions will be automatically turned on by default. The counting
display will show“ 0 when the unit is ready<the machine is in its normal working condition>.”
1>Counting Function
Once the bills are correctly placed in the hopper, the machine will start counting automatically. The number of counted bills will be shown
on the counting display. Moreover, once the bills are removed
from the stacker, the counting display will be clear and the batch
display in turn will show the number of counted bills instead.
Bills should be correctly placed as indicated in the following steps:
Place the bills between the counting guides as shown in the figure1
and figure2. Swiftly, push the bills with a figure<see figure3>
to make them rest on the top of the hopper plate, in the correct
counting position.
4
Figure 1 Figure 2 Figure 3
Su ita blefo rbot hnew ,old ,di rty ,ta tter edpo lym erbil lsan dpap erbil ls
9.Hopper adjustment
---When improper feeding of bills occur, adjust the feeding thickness setting in the hopper by tuning the adjustor wheel located in the
back of the machine to ensure proper feeding.
---Rotate towards right to diminish the thickness <see figure 4>
9
Generally speaking, most of the above-mentioned problems may be caused by dust or dirt inside of
the machine. So keeping the machine clean is highly recommended .
Message Error Solution
E01 Problem with the left counting sensor Clean the sensor or replace it
E02 Clean the sensor or replace itProblem with the right counting sensor
Problem with the speed sensor Clean the sensor or replace it
E03
Problem with the auto start sensor Clean the sensor or replace it
E04
Problem with the preset sensor Clean the sensor or replace it
E05
Clean the sensor or replace it
E10 Problem with the UV sensor
2. F
2. F
2. F
2. F2. Fun
un
un
ununct
ct
ct
ctctio
io
io
ioion co
n co
n co
n con cont
nt
nt
ntntro
ro
ro
rorols a
ls a
ls a
ls als and d
nd d
nd d
nd dnd dis
is
is
isispl
pl
pl
plplay
ay
ay
ayay
2. Function controls and display
--
--
--
-----b
-b
-b
-b-bef
ef
ef
efefor
or
or
orore ope
e ope
e ope
e opee opera
ra
ra
rarati
ti
ti
tition
on
on
onon, ple
, ple
, ple
, ple, pleas
as
as
asase be c
e be c
e be c
e be ce be cle
le
le
lelear w
ar w
ar w
ar war whic
hic
hic
hichich mo
h mo
h mo
h moh mode
de
de
dedel yo
l yo
l yo
l yol you hav
u hav
u hav
u havu have bo
e bo
e bo
e boe boug
ug
ug
ugught
ht
ht
htht
---before operation, please be clear which model you have bought2. Function controls and display---before operation, please be clear which model you have bought
A. CF”button(Detection function)“
B. AUTO” button“
C. 0-9 button(B atch function)“ ”
D. DD button“ ”
E. BATCH button“ ”
F. RESE T button“ ”
G. SET button(Set the parameter)“ ”
H. ADD button(Addition function)“ ”
I. C button(Cancel function)“ ”
J. IR button“ ”
The model with UV/MG1/MG2/IR/DD counterfe t detectioni
Su ita blefo rbot hnew ,old ,di rty ,tat ter edpo lym erbil lsan dpaperbil ls
2
11.Specification
Dimension ： 320mmx265mmx170mm
Gross weight: 7.0kgs
Net weight ： 5 .8kgs
Power supply AC230V±10%,50Hz±5%; AC120V±10%,60Hz±5%; DC85-250V,50-60Hz ：
Power consumption ： ≤ 70W
Banknote size Min 50mm x 110mm ; Max90mm x 190mm ：
Counting speed ： ≥ / 1050pcs min
Batch range ： 1-999
Counting display ： Front color LCD+Side LCD display
11
Su ita blefo rbot hnew ,old ,di rty ,tat ter edpo lym erbil lsan dpaperbil ls
CONTENT
1.Illustration---------------------------------------------------------------------------------1
2.Function controls and display----------------------------------------------------------2
3.General instruction-----------------------------------------------------------------------3
3-44.Safety instruction ------------------------------------------------------------------------
5.Power up-----------------------------------------------------------------------------------4
6.Counting function-------------------------------------------------------------------------4-5
7.Counterfeit Detection-------------------------------------------------------------------- 6-7
8.Error code and solution -----------------------------------------------------------------8-9
9.Hopper adjustment-----------------------------------------------------------------------9-10
10.Maintenance-----------------------------------------------------------------------------10
11.Specification ----------------------------------------------------------------------------11
E B J G FI
A H C D
Product specificaties
| Merk: | Pyle |
| Categorie: | Biljettelmachines |
| Model: | PRMC600 |
Heb je hulp nodig?
Als je hulp nodig hebt met Pyle PRMC600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Biljettelmachines Pyle
4 Oktober 2022
4 Oktober 2022
Handleiding Biljettelmachines
- Biljettelmachines Merlin
- Biljettelmachines Royal Sovereign
- Biljettelmachines Olympia
- Biljettelmachines Safescan
Nieuwste handleidingen voor Biljettelmachines
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022