Pyle PLDMR27NBK Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Pyle PLDMR27NBK (14 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
PLDMR27NBK
Marine Stereo Receiver Power Amplifier
AM/FM/MP3/USB/BT/AUX/DVD/CD Marine Stereo Receiver, Double DIN,
30 Preset Memory Stations, LCD Display with Remote Control
www.PyleUSA.com
2
To ensure correct operation and avoid damage,
please read this user manual carefully before using this product.
INSTALLATION
Installation Procedures
1. First complete the electrical connections and then check for correctness.
2. Disconnect the battery negative terminal of vehicle before beginning installation.
Installation Opening
This unit can be installed in any dashboard having an opening as shown below.
To Install the Car Radio
Be sure you test all connections ๎˜Ÿrst, and then follow these steps to install this unit.
1. Make sure the ignition is turned o๎˜Ÿ, and then disconnect the cable from the
vehicle batteryโ€™s negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. โ€ brackets (2pcs) on the both sides of the car receiver with screws Attach the โ€œL
(M5 x5) as shown as the below ๎˜žgure. The others ๎˜žxing screws that ๎˜žx the
other terminal of the โ€œ โ€ metal bracket, please buy from your dealer according L
to the drilling of holes size.
103 mm
182 mm
www.PyleUSA.com 3
INSTALLATION
Connect all wiring harness and slide the head unit into the mounting collar
until it clicks into place.
Wiring Connections
- +12V DC Negative Ground.
- Only use speakers with 4 ohms impedance.
- The maximum current of the Amp remote trigger is 200mA.
1. Speaker Connectors:
Violet: Right Rear (+)
Violet / Black:Right Rear (-)
Gray: Right Front (+)
Gray/Black: Right Front (-)
White: Left Front (+)
White/Black: Left Front (+)
Green:Left Rear (+)
Green/Black: Left Rear (-)
2. Power Connectors:
Blue: Antenna / Remote
Red: Ignition (+12V)
Yellow: Battery (+12V)
Black: Chassis Ground (-)
V-OUT1
AUX-L F-L
F-R
R-L
R-R
ANT
AUX-R
V-OUT2 SUB
3. Fuse 10A
4. Audio / Video Inputs & Outputs
V-OUT1: Video Output 1 (Yellow)
AUX-L: Audio Input Left CH
AUX-R: Audio Input Right CH
V-OUT2: Video Output 1 (Yellow)
F-L: Front left PRE-AMP output (White)
F-R: Front right PRE-AMP output (Red)
SUB: Subwoofer Output (Green)
R-L: Rear left PRE-AMP output (White)
R-R; Rear right PRE-AMP output (Red)
5. Radio Antenna Socket


Product specificaties

Merk: Pyle
Categorie: Niet gecategoriseerd
Model: PLDMR27NBK

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLDMR27NBK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Pyle

Pyle

Pyle PSCBLKIT22 Handleiding

12 November 2024
Pyle

Pyle PDWR61BT Handleiding

20 Oktober 2024
Pyle

Pyle PVCLG85 Handleiding

20 Oktober 2024
Pyle

Pyle PLCAPE50 Handleiding

26 September 2024
Pyle

Pyle PLCAPE60 Handleiding

26 September 2024
Pyle

Pyle PLCAPE32 Handleiding

24 September 2024
Pyle

Pyle PYG60 Handleiding

5 Augustus 2024
Pyle

Pyle PSIB27X2 Handleiding

7 December 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd