Pyle PLCM4700 Handleiding

Pyle Niet gecategoriseerd PLCM4700

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PLCM4700 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

WARNING: injuryFailure to read and follow these warnings and instructions may result in serious , including damaged

property, so please pay close attention and exhibit the utmost care.

• The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving conditions,

obstructions, and large stationary objects also remember to drive . You, the driver, must safely and properly. Use of the

Digital Backup Camera is not a substitute for safe, proper and legal driving practices.

• Never back up while looking only at the screen. You should always check behind and around the vehicle when backing

up just as you would if the vehicle did not have the Digital Backup Camera. Always make sure your driving area is clear.

Always back up slowly and with caution.

• Never depend on the Backup Camera entirely when backing up. The image on the screen is different from actual and

real-time conditions. Objects viewed in the rear view monitor differ from actual distance angle lens is s because a wide-

used. So use the camera as an aid and always follow intended driving practices to properly judge distances from objects.

• The Backup Camera's assisted low lux lighting performance feature is an aid to a driver Always use your own eyesalso .

to confirm the vehicle’s surroundings, as the displayed image may be not well lit or not entirely visible. Always proceed

with caution and perform double before proceeding. -checks

• The area displayed by the Backup Camera is limited. objects that are close to or It does not display just below the

bumper, underneath the vehicle, or objects out of the camera’s view. The camera's view can change according to your

vehicle's orientation on the road or changing road conditions.

• Be sure to check the calways amera is properly functioning, is properly positioned securely ed and mount .

• Make sure operates correctly, as intended, before and after installationyour trunk hatch or .

• Proceed with caution when cleaning your vehicle around the camera. water exposure around the camera Avoid excess

especially with spraying or a power washer.

• Please make sure to keep the camera clean and unobstructed from any debris

• Follow all traffic laws and motor vehicle regulations.

• Consult local laws and regulations for any restrictions on installation or use.

• Using a Backup Camera is not enough to completely System adequate eliminate a Always remember vehicle’s blind spot.

to drive with caution, following all traffic laws.

Please read all of the installation instructions carefully before installing the product. Improper installation will void

manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as

guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable

installing the product. Prior to using and installing the Backup Camera System, please read the safety information

provided in this user manual. Be sure to use the product as outlined in this user manual. Altercation or modifications

carried out without appropriate authorization may invalidate the user's right to operate the equipment.

System Installation and Wiring

Camera Syste or may not even be compatible for m installation on diesel vehicles require a slightly different wiring installmay --

installation with your vehicle. These installation instructions do not apply to all types of vehicles. They are meant only as a general

guide due to the large number of vehicle makes and models. Consult your local motor vehicle laws on the use of this product to be

sure it is permitted. Through installation of this backup camera system, you should be sure as to not degrade, damage or compromise

the safety of any system or device on your vehicle. Improper installation and wiring of the vehicle back-up camera system may

damage the vehicle's electrical system, including vital vehicle computer and operating systems. That could lead to an accident or fire,

causing property damage and /or serious personal injury. It is highly recommended to seek professional installation advice from a

qualified auto electrician or, in the alternative, to have the installation performed by a qualified auto electrician.

Please ensure that your monitor is secured and mounted where it would NOT obstruct any OEM vehicle safety features. In an event of

an accident, manufacturer is not responsible for bodily injury caused by the monitor being a projectile. Select location for mounting

the monitor in desired location. Ensure monitor location will not obstruct your vision while driving. The manufacturer assumes no

liability for damage caused to your vehicle due to improper installation or use.

Quick Installation:

The backup camera system is compatible with a wide range of vehicles and video display monitors .

This kit includes necessary wiring and cable connector accessories sufficient for typical connections. However,

additional accessory cables and installation materials may be necessary for a completely secure and

operational backup camera performance.

Connect the camera, using the red cable, of the DC 12V power cable to the positive 12V reverse tail light in the ,

rear of your car. You may need to temporarily remove an interior panel or other cover. Then, connect the black

wire, of the DC 12V power cable, and ground properly. This connected power and ground cable connects to the

camera, and will supply power to camera directly.the (Red wire is positive, black wire is negative)

Then use the included yellow RCA video connector cable, and run that cable to the yellow RCA connector video

jack of the camera , to the RCA video connector of a compatible video display monitor.

*The system includes an additional video input connection, so you will have the ability to connect an additional

video input source. The input source is then selectable via button on the monitor.

Connect the monitor using the included sing the red cable, of the next DC 12V cables. U power cable, connect to

your vehicle's fuse panel (preferably to the 12V ignition switch) - which will only be powered when your vehicle is

on, or activated by key. Then connect the black wire, of the DC 12V input, and ground properly. The system

includes a cigarette lighter accessory power outlet cable, for optionally providing power to the video monitor

display.

Caution: This unit is designed to operate on DC NEGATIVE GROUND electrical systems. Connecting to other types of electrical systems will

cause damage to your vehicle. Please contact the manufacturer if you are unaware of the system type in your vehicle.

Product specificaties

Merk:	Pyle
Categorie:	Niet gecategoriseerd
Model:	PLCM4700
Kleur van het product:	Zwart
Gewicht:	721 g
Connectiviteitstechnologie:	Bedraad
Afmetingen (B x D x H):	254 x 32 x 33 mm